Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

52023011 Lightscale adapter 10° angled, plastic, for Lightscale touring car airbox

Product information "52023011 Lightscale adapter 10° angled, plastic, for Lightscale touring car airbox"

The 10 ° downward angled adapter for the Lightscale touring car air box is made ​​from high quality plastic (weight-reduced) and uses an O-ring for sealing; which prevents the airbox slipping as well. The adapter features a slight reverse taper on the outside, making it virtually impossible for the airbox to come loose.

The plastic adapter comes with O-ring, screws for installation, gasket and hose clamp included.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

50023010 Lightscale Airbox Adaptor, 1 pce.
Replacement part for Lightscale air boxes 52023000 (touring cars) and 51023000 (Formula 1).Adaptor is identical for both versions.Content of delivery:- Adaptor- Mounting bolts- Gasket

€34.90*

Average rating of 0 out of 5 stars

52023010 Lightscale adapter 10° angled, aluminum, for Lightscale touring car airbox
Genuine Lightscale spare/option part. The 10 ° downward angled adapter for the Lightscale touring car air box is made ​​from high quality aluminum and uses an O-ring for sealing; which prevents the airbox slipping as well. The adapter features a slight reverse taper on the outside, making it virtually impossible for the airbox to come loose.The aluminum adapter comes with O-ring, screws for installation, gasket and hose clamp included.Contents:1 set

€65.90*

Customers also viewed

Average rating of 0 out of 5 stars

9466/05 FG Foam filter insert, 2 pcs.
For the new fg airbox no. 9466 and no. 9467

€17.90*

Average rating of 0 out of 5 stars

y1344 GPM Air filter cover for Losi Desert Buggy XL/2.0
GPM air filter cover which fits easily over your existing air filter. A fastening band band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments.

€13.30*

Average rating of 0 out of 5 stars

y0487 Air filter adapter for Solo engines, 1 St.
With this adapter you get all the major solo air boxes mounted on her solo motor.

€9.90*

Average rating of 0 out of 5 stars

Mielke 5220 Venturi adapter - 1pcs

€37.90*

Average rating of 0 out of 5 stars

y1009 Zenoah G240RC with Walbro carburetor WT 990
23 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G230:Quantity of cylinder mounting bolts increased from 2 to 4Improved strength of crankcaseAdded additional bearing on the PTO (clutch) side of crankshaftRedesigned shape of cylinder finsDimension of air intake port is 5% widerContains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€274.90*

Average rating of 0 out of 5 stars

50023010 Lightscale Airbox Adaptor, 1 pce.
Replacement part for Lightscale air boxes 52023000 (touring cars) and 51023000 (Formula 1).Adaptor is identical for both versions.Content of delivery:- Adaptor- Mounting bolts- Gasket

€34.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development