Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

WP-BL200A Leopard Hobby RC-RUN TOP 5 V3 1:5 Brushless control 200A

Product information "WP-BL200A Leopard Hobby RC-RUN TOP 5 V3 1:5 Brushless control 200A"

Genuine Leopard Hobby spare/option part.

High Reliability & Durability
Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the RC-RUN TOP 5 is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.


Features :
  • Program Port: FAN/Program Port
  • ESC Programing via:LCD Program Box / LED Program Box / Set-Up button on ESC
  • BEC Output: Switch Mode:6V/7.4V, 6A
  • Output Connectors: 6.5mm female gold connectors
  • Cont./Peak Current: 200A/1300A



Great Flexibility & Versatility
With incredible acceleration capabilities and a rock-solid, stable output, the TOP5 can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.


Applicable to All Weather Conditions
The waterproof and dust-proof design allows the TOP5 to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.


Advanced and Secure Electronic Switch
The TOP5 features an electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.


High Voltage Built-in BEC
The TOP5 has adopted the worlds first HV built-in BEC with an output current of up to 25Amp and a switchable output voltage of 6V-7.4V. The high voltage BEC is designed to handle todays high voltage servos on demand used by large scale vehicles.


Regular Firmware Updates Free of Charge
You can upgrade the TOP5 with the USB LINK software, a multifunction LCD program box and a laptop.

Built-in Anti-Spark System
The TOP5 is built with internal anti-spark circuitry that protects not only battery connectors from damage but helps to prevent physical injury due to burnt fingers from the inevitable issue of sparking when hooking up the ESC to higher voltage battery packs (5S/6S/7S/8S).


Wide Range of Applications
The RC-RUN TOP 5 provides the ultimate power upgrade solution for many popular 1/5th scale vehicles like HPI Baja buggy, Losi 5IVE-T and Desert Buggy XL. Its also suitable for various other brand of 1/5th scale on-road cars, truggies, SCTs and buggies.


Maintenance Free
The ESC minus the cooling fan is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle high jumps and landings on hard surfaces.

Technical data Daten:
  • battery connectors: without
  • Motor type: Sensorless Brushless
  • Applications: 1/5 Scale Touring Car, Buggy, Truggy and Monster Truck
  • Motor Limits Brushless: 8S LiPo/24S NiMH: KV<=1000 (58110 size)
  • Cell count: 9-24S NiMH / 3-8S LiPo
  • BEC Output: Switch Mode:6V/7.4V, 6A
  • Fan: yes, powered by BEC
  • Size (LxWxH): 93.35 x 58.12 x 47.81mm
  • Weight: 342g


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1303/11 EC8 male connector
Genuine HT spare/option part.Two-pole, reverse-polarity protected plug with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.When used without the blue housing, the contacts are also compatible with the 8 mm sockets found on many larger ESCs.Contents:1 piece

€5.90*

Average rating of 0 out of 5 stars

y1303/12 EC8 female connector
Genuine HT spare/option part.Two-pole, reverse-polarity protected socket with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.When used without the blue housing, the contacts are also compatible with the 8 mm bullet connectors found on many larger brushless motors.Contents:1 piece

€5.90*

Average rating of 0 out of 5 stars

68510 FG Electric conversion kit 1:6 2WD for 465 Wheelbase, set
Item N° 68510 Electric conversion kit 1:6 2WD for 465 Wheelbase, setSuitable for 2WD Buggy and Monster models as Marder, Beetle, Monster-Truck, Hummer, Jeep a.s.o with 465 mm wheelbase.This conversion kit is suitable for the 2WD FG models Marder, Beetle, Off-Road Buggy and Monster models with 465mm wheelbase. Suitable for the electric engines from FG Modellsport, Leopard BL engines and Castle Creation. The conversion kit includes gear and engine mount, fixing parts for cruise control and LiPo batteries. Cruise control, BL engine and LiPo batteries are not included. During the conversion several fixing holes have to be applied to the chassis. Gear transmission has to be changed accordingly to the use of the electric engine.For easy mounting we recommend LiPo batteries with a max. length of 150mm and 50mm width.The conversion kits include all mechanical parts (except electric engine with speed control, Lipo batteries) to convert your FG model scale 1:5 and 1:6 to an electric powered system.

€194.50*

Average rating of 0 out of 5 stars

68511 FG Electric conversion kit 1:5 2WD with Wheelbase 465 to 535, set
Item N° 68511 Electric conversion kit 1:5 2WD with Wheelbase 465 to 535, setSuitable for the 2WD Touring sports cars and 2WD Race Trucks with a wheel base of 465 mm and 530/535 mm.This conversion kit is suitable for the 2WD 1:5 touring and sportscar models with 465mm - 530mm wheelbase. Suitable for the electric engines from FG Modellsport, Leopard BL engines and Castle Creation. The conversion kit includes gear and engine mount, fixing parts for cruise control and LiPo batteries.Cruise control, BL engine and LiPo batteries are not included.During the conversion several fixing holes have to be applied to the chassis. Gear transmission has to be changed accordingly to the use of the electric engine. For easy mounting we recommend LiPo batteries with a max. length of 150mm and 50mm width.The conversion kits include all mechanical parts (except electric engine with speed control, Lipo batteries) to convert your FG model scale 1:5 and 1:6 to an electric powered system.

€194.50*

Average rating of 0 out of 5 stars

68512 FG Electric conversion kit for 1/6 WB535 (2WD/4WD) and 1/5 new version
Genuine FG spare/option part. This conversion kit is suitable for the newer chassis of 2WD and 4WD touring and sportscars and Buggy/Monster models with 500mm - 535mm wheelbase. Suitable for the electric engines from FG Modellsport, Leopard BL engines and Castle Creation. The conversion kit includes gear and engine mount, fixing parts for cruise control and LiPo batteries. Cruise control, BL engine and LiPo batteries are not included. During the conversion several fixing holes have to be applied to the chassis. Gear transmission has to be changed accordingly to the use of the electric engine.For easy mounting we recommend LiPo batteries with a max. length of 150 mm and 50 mm width.The conversion kits include all mechanical parts (except electric engine with speed control, Lipo batteries) to convert your FG model scale 1:5 and 1:6 to an electric powered system.Contents:1 set

€194.50*

Alternatives

Average rating of 0 out of 5 stars

y1567 ZTW Beast Pro 200A ESC
Genuine ZTW spare/option part. Features:Enchanced throttle response, excellent acceleration, linearity and driveabilityUsind the advanced PC interface allows you to set up, program or update the firmwareFully Programmable via LCD program card, PC interfaceAdjustable BEC output 6.0/7.4V, up to 8A current outputMultible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protectionSpecification:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: yesWaterproof: yes, IP67 ratedSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kgFor firmware updates, the ZTW program card is required in conjunction with a PC.For programming you need only the program card.Contents:1 piece

€279.90*

Average rating of 0 out of 5 stars

y1549 ZTW Beast Pro 300A 12S ESC
Genuine ZTW spare/option part. Features:Enchanced throttle response, excellent acceleration, linearity and driveabilityUsind the advanced PC interface allows you to set up, program or update the firmwareFully Programmable via LCD program card, PC interfaceAdjustable BEC output 6.0/7.4V, up to 8A current outputMultible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protectionSpecification:Continuous Current: 300ABurst Current: 1800ABEC: 6,0 V/7,4 V einstellbar / 8 ABattery NIXX / LiPo: 18 - 36NC / 6-12S LiPoWidth: 74 mmLength: 115 mmHeight: 78 mmWeight: 500gProgrammable: JaWaterproof: splash proofThis esc is designed by ZTW for motors up to 800KV. Motors with higher KV ratings are not compatible.To change the firmware, the ZTW program card is required in conjunction with a PC.Contents:1 piece

€449.99*

Similar products

Average rating of 0 out of 5 stars

y1549 ZTW Beast Pro 300A 12S ESC
Genuine ZTW spare/option part. Features:Enchanced throttle response, excellent acceleration, linearity and driveabilityUsind the advanced PC interface allows you to set up, program or update the firmwareFully Programmable via LCD program card, PC interfaceAdjustable BEC output 6.0/7.4V, up to 8A current outputMultible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protectionSpecification:Continuous Current: 300ABurst Current: 1800ABEC: 6,0 V/7,4 V einstellbar / 8 ABattery NIXX / LiPo: 18 - 36NC / 6-12S LiPoWidth: 74 mmLength: 115 mmHeight: 78 mmWeight: 500gProgrammable: JaWaterproof: splash proofThis esc is designed by ZTW for motors up to 800KV. Motors with higher KV ratings are not compatible.To change the firmware, the ZTW program card is required in conjunction with a PC.Contents:1 piece

€449.99*

Average rating of 0 out of 5 stars

7909 Brushless controller 150A
Genuine FG spare/option part. Technical data:Voltage range: 2S-6S Li-Po (7.4 22V)BEC 6V/3ADimensions: 55 x 48 x 38 mmWeight: 185g Contents:1 piece

€224.95*

Average rating of 0 out of 5 stars

7913 FGHobbywing WP-6BL160 RTR Brushless ESC 160A
Genuine FG spare/option part. For motors with and without sensor. Only high-quality components were used in the construction! The controller has many programmable parameters, low voltage protection and a temperature shutdown.Parameters can be programmed via the set button, a programming card or a programming box and firmware updates can be performed using the programming box with a PC.Technical data:Continuous current: 160APeak current burst: 1050ABattery: 3S - 8S LiPo or 9-24 cells NiMHBEC: 6V/7.2 V - 3A/6 ADimensions: 70x56x46.5 mmWeight: 240gContents:1 piece

€299.95*
%

Average rating of 0 out of 5 stars

SPMXSE1160 Spektrum Firma 160 Amp Brushless Smart ESC 3S-8S
Like every component in the Spektrum Smart ecosystem, Firma Smart ESCs combine "plug-and-play" simplicity with the ability to communicate with other Smart electronics together, creating the best-performing RC system for your vehicle imaginable.Firma Smart ESCs do much more than regulate power. They function like a virtual engineer inside your model, providing a direct path to the vital operating data you need to reach peak performance. Firma Smart ESCs give you an extra layer of confidence that your electronics are all operating at their best.With Firma Smart ESCs, you'll be better connected to your vehicle than ever before without installing extra components that all work independently of each other. You won't need extra wires, modules, or links. A Firma electronic speed control provides a one-wire solution for obtaining telemetry data such as RPM, temperature, battery voltage and capacity.Firma ESCs not only gather the data but also send it to your transmitter in real time, instead of only storing it for after-run study. You're able to adjust settings as needed to boost performance on the go. The Firma Smart single-wire telemetry solution has been tested for quality and performance by the best brands in RC. Their verdict? Smart technology is both simpler and superior!Product Features Smart all-in-one telemetry Fast, powerful 32-bit ARM M4 processor Waterproof Multiple options for easy programming: Button programming Smart ESC Programming Box SmartLink USB Updating and Programmer application Multi-point protection: Over-current protection Automatic LiPo low-voltage cutoff Thermal protection Failsafe protection Developed and designed by Spektrum engineers, in partnership with the industry's leading ESC manufacturer Compact for easy installation in most applications Ready to install no soldering required Rugged plastic case with mounting tabs Aluminum heat sink for high efficiency Cooling fan Adjustable high-power BEC Firmware updatable through the Smart ESC Programming Box High heat-resistant IC connectors, backwards compatible with EC connectors WATERPROOF The all-weather, waterproof design of Spektrum Firma Smart ESCs allows them to perform in nearly any terrain under almost any conditions. Firma ESCs keep you going through dust, gravel, snow, and water. EC3/EC5 BACKWARDS COMPATIBLE Firma ESCs feature IC series battery connectors. The IC series of connectors are designed from the ground up to provide a more solid connection, higher heat resistance, and effortless installation. When used with an IC3 or IC5 connector-equipped Spektrum Smart battery, the ESC can receive and transmit battery telemetry data. EC3 and EC5 are also compatible with Firma ESCs for basic operation and ESC telemetry. ONE-WIRE TELEMETRY No need to connect multiple wires, sensors, modules, and links. With Firma ESCs, simple one-wire telemetry transmits a wide range of data directly to your transmitter in real time, including RPM, voltage, temperature, balance, capacity, and speed. ONE-WIRE TELEMETRY No need to connect multiple wires, sensors, modules, and links. With Firma ESCs, simple one-wire telemetry transmits a wide range of data directly to your transmitter in real time, including RPM, voltage, temperature, balance, capacity, and speed. SMART TECHNOLOGY BATTERY DATA When used with a Spektrum Smart LiPo battery, your Firma ESC provides you with the benefit of battery telemetry that's automatically transmitted to your compatible Spektrum radio in real time. On your transmitter screen you'll be presented with helpful information such as number of cycles, battery percentage, individual cell voltage and more! MULTIPLE PROGRAMMING OPTIONS Multiple programming options are available. Button programming can be used with nothing more needed. Using the Smart Firma ESC Programming Box, you can easily change settings at the track to suit driving conditions. An easy-to-use Smart Link USB Updating and PC Programmer app is also available. FAST, POWERFUL M4 PROCESSOR The Firma ESCs' 32-bit M4 processor produces higher resolution signal input and more accurate motor output.

€249.00* €269.99* (7.77% saved)

Average rating of 0 out of 5 stars

500502032/100 Carson CY-Eline Brushless controller 150A
Genuine Carson spare/option part. Fits CY-Eline models.Continuous Current: 150ABattery NIXX / LiPo: 6-18NC / 2-6S LiPoBEC: 3A/5,75VContents:1 piece

€199.99*

Average rating of 0 out of 5 stars

DYNS2661 Losi Dynamite FUZE 160A BL WP 1/5th ESC, 8s control
Genuine Losi spare/option part. Contents:1 set

€259.99*

Average rating of 0 out of 5 stars

500906122 Carson Brushless ESC 150A
Genuine Carson spare/option part. Continuous Current: 150ABattery NIXX / LiPo: 6-18NC / 2-6S LiPoBEC: 3A/5,75VContents:1 piece

€179.99*

Average rating of 0 out of 5 stars

y1567 ZTW Beast Pro 200A ESC
Genuine ZTW spare/option part. Features:Enchanced throttle response, excellent acceleration, linearity and driveabilityUsind the advanced PC interface allows you to set up, program or update the firmwareFully Programmable via LCD program card, PC interfaceAdjustable BEC output 6.0/7.4V, up to 8A current outputMultible protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protectionSpecification:Conzinous current: 200ABurst current: 1300ABEC: 6,0 V/7,4 V adjustable / 8 ABattery NIXX / LiPo: 8 - 24NC / 6-8S LiPoWidth: 55 mmLength: 90 mmHeight: 50 mmWeight: 407gProgrammable: yesWaterproof: yes, IP67 ratedSuitable Car: 1/5 Buggy/TruggySuitable car weight: 13kgFor firmware updates, the ZTW program card is required in conjunction with a PC.For programming you need only the program card.Contents:1 piece

€279.90*

Customers also viewed

Average rating of 0 out of 5 stars

y2009 Top Tuning Digital pro servo 25 kg
y2009 TopTuning Digital pro 25 kg is a digital large scale servo with very robust metal gears.It offers a lot of power at a good speed and has a metal housing.Its installation dimensions fit directly as a throttle / brake servo for FG, HPI and various other models! Top Tuning Bigscale 25kg - servo for throttle / brake Dimensions identical to: FG 6598 t1005 10 kg Spectrum Z590 6 kg HPI SF 20W 7 kg y2007 Digital Bigscale 30 kg y2008 Digital Bigscale 20 kg Technical data: Classification: universal servo Dimensions LxWxH (mm): 40.5 x 20 x 39 mm Operating voltage: 6 volts / 7.4 volts Torque: (Ncm): 220/250 Speed (sec / 60 °): 0.14 / 0.12 Number of ball bearings: 2 Servo gear: metal gears Seals: 3 (splash-protected) Silicone cable: with universal plug, 300 mm long Weight: 62.5 grams Steel output shaft 25T spline Content: 1 piece of TopTuning Digital pro servo 25 kg 1 piece double sided servo arm 53 mm total 1 piece of 35 mm single sided servo arm 4 pieces of guide sleeves 4 pieces of rubber grommets 4 pieces of fastening screws

€49.90*

Average rating of 0 out of 5 stars

FG Sportsline 2WD-510 Electric BMW E30
The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card. Equipment: y1567 ZTW Beast Pro 200A Regler TT5692 Top Tuning Brushless Motor 1090 kV You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Empfänger: Mini BECy1570 CYS S0650 Largescale servo, 40 kg/0,11 secTx-batterys 4 pieces y0660/04 All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.

From €1,179.95*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency