y1303/12 EC8 female connector

€5.90*

Available

Product number: y1303_12

EAN: 4058575100133

Product information "y1303/12 EC8 female connector"

Genuine HT spare/option part.

Two-pole, reverse-polarity protected socket with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.

For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.

When used without the blue housing, the contacts are also compatible with the 8 mm bullet connectors found on many larger brushless motors.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y1303/11 EC8 male connector

Genuine HT spare/option part.Two-pole, reverse-polarity protected plug with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.When used without the blue housing, the contacts are also compatible with the 8 mm sockets found on many larger ESCs.Contents:1 piece

€5.90*

6544/01 FG Charging cable EC8 with gold contacts

Genuine FG spare/option part.Contents:1 piece

€13.90*

Similar products

y1303/11 EC8 male connector

€5.90*

TT1021/11 Top Tuning Cable hook-and-loop tape 20x420 mm

Genuine Top Tuning spare/option part. Dimensions:Length: 420 mmWidth: 20 mmContents:2 pieces

€10.90*

TT1021/12 Top Tuning Cable hook-and-loop tape 20x500 mm

Genuine Top Tuning spare/option part. Dimensions:Length: 500 mmWidth: 20 mmContents:2 pieces

€11.90*

66514 FG Reducing bush Ø 10/8 x 18mm, 1 pce.

Item N° 66514 Reducing bush Ø 10/8 x 18mm, 1 pce.

€11.30*

y1544 LiPo CellMeter 3 in 1 Tester, balancer and discharger, with servo tester

Genuine rc-car-online spare/option part. Compatible with up to 8S lithium batteries. In addition to the LiPo Tester, the CellMeter also has a built-in servo tester. This makes it possible to check at any time whether the servos are working properly.Technical data:High visibility LCD displayBalancer functionDischarge functionVery accurate battery checkSuitable for Li-Ion, LiPo, LiFe, LiHv, NiCd, NiMh batteries (up to 8 cells)Battery type and Zellenanzahl will be recognized automaticallyVoltage displayed individually for every cellWeight: 48gDimensions LxWxH: 84 mm x 52 mm x 15 mmContents:1 piece

€21.90*

y1611 Mounting bracket for ZTW 300A Beast esc in Losi 5ive-T/B

Genuine rc-car-online spare/option part. Mounting bracket for installation of the ZTW 300A Beast esc in Losi 5ive-T and 5ive-B.Requires drilling of two holes for 5 mm screws into the chassis plate.Contents:1 piece

€19.90*

Details

66526 FG Support pad for cruise control, 2 pcs.

Item N° 66526 Doublesided self-adhesive anti-vibration pads, 66 x 51 mm, 2 pcs.

€4.90*

108733 HPI Battery box foam Baja 5B Flux

Genuine HPI spare/option part. Content:1 set

€10.50*

66525 FG Battery pad for cruise control, 2 pcs.

Item N° 665265Battery pad for cruise control, 2 pcs.

€7.90*

LOS251048 Losi Battery Strap, DBXL-E

Genuine Losi spare/option part. Contents:6 pieces

€19.99*

Details

7908 FG Y cable with gold connectors plug/socket 8 mm

Genuine FG spare/option part. For connecting the 200A brushless controller to one or two LiPo batteries.Gold plated 8 mm diameter connectors.Content:2 pieces

€17.90*

105409 HPI D-Box 2 adjustable stability control system

Genuine HPI spare/option part.The D-BOX 2 is the Secret Weapon for your driving and drifting!The HPI D-BOX 2 is developed for RC cars of all types - it's not just for drifters! From the Baja 5B to the Micro RS4 - the D-Box 2 is for you! - You can use the D-BOX 2 on slippery surfaces like wet paved surfaces, muddy conditions, loose dirt and wet clay tracks to give you perfect control in the turns. Simply connect the super-small D-BOX 2 between your receiver and steering servo for an amazing difference in your driving performance!This makes the D-BOX 2 perfect for nitro racers, touring car drivers, Baja and monster truck owners, bashers and more!Perfect for Drift Drivers!The D-BOX 2 is the perfect item to help you get long drift distances and the perfect drift angle, for a dramatic improvement to your drift driving! Just change the Sensitivity Mode Switch to help alter your car's angle through the turns!Massively Improved over the Original D-BOX!The D-BOX 2 is a huge improvement on the earlier ground-breaking HPI D-Box. The original D-BOX has the capability of adjusting the gyro sensitivity. Steering response may be reduced, which will make the car more stable. In turn, it under steers when cornering.While the first generation D-BOX cannot tell if the motion is coming from the car or radio, the new D-BOX 2 has an amazing feature that improves response when the gyro sensitivity is increased (Patented steering operation priority system) using the Mode switches (see below). This new priority system allows the steering inputs from the transmitter to have priority over the gyro. While the D-BOX 2 is perfect for all types of vehicles, this gyro correction is seen the most when used in high-powered off-road cars: increasing the throttle will not spin the car out, even in slippery conditions! The D-BOX 2 will also prevent sliding in sudden braking or steering.Exclusive Sensitivity Mode SwitchThe HPI D-BOX 2 allows you to set 4 sensitivity modes using 2 switches. Mode 0 has the characteristics of the original D-BOX, with gyro compensation present from the steering action provided by your radio signal. You can get more steering control and less gyro compensation as you change the modes up to Modes 1, 2 and 3 - if you want earlier steering response through the transmitter and less from the gyro, simply change the mode to a higher number. Test drive the different modes to find the optimal driving mode for your preference! Specifications:Dimensions: 26,5 x 27,0 x 10,0 mm (excluding wire)Weight: 9.5gOperating voltage: 4,8V - 7,4VPower consumption: 10 mA/6VNeutral servo signal: 1,5 m/Sec (1,45-1,55 m/Sec)Servo signal cycle: 3 - 22 m/Sec (Digital servo mode support)Contents:1 piece

€84.90*

Customers also viewed

6544/01 FG Charging cable EC8 with gold contacts

Genuine FG spare/option part.Contents:1 piece

€13.90*

6544/02 EC8 female connector, solder-on

Genuine FG spare/option part.Contents:1 piece

€13.90*

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5

€23.90*

Details

803010/01 Ford Capri RS Zakspeed 1/5 body shell set, painted, wheelbase 530 mm

Rare itemFord Capri Zakspeed RS 1/5 top quality body shell set, fits 1/5 touring cars with a wheelbase of 530mm.The body shell set includes main section, front air dam, rear section, rear wing and a pair of rear wing brackets with all necessary screws. The set is delivered with RS Zakspeed painted. Required body mounts: Rear side: 9014 FG Body mounts Front side: 3014 FG Body mounts Rear: 2x 7152/01 FG Extended rear mount Front pumper: 7020/14 FG Front bumper Front: 2x 7155 FG Body mount short adjustable Dimensions:Length: approx. 940 mmWidth front: approx. 390 mmWidth rear: approx. 415 mmHeight: approx. 230 mmContent:1 set

€289.90*

Tamiya Lexan spray paint

farbe_0001 Color: PS-7 Orange

TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€97.90* / 1000 Milliliter)

Variants from €9.01*

€9.79*

Details