Genuine Hyde's spare/option part.Replacement brake pads for the Mr. Hyde's brake no. 1200315.Contains:2 pieces
Genuine Samba spare/option part. The Samba 5ive T tuned pipe from the multiple world champion.The Samba Competition version!Top quality and optimized performance across the entire rpm range of your engine. The tuned pipe is designed for engines from 26 cm³ to 32 cm³ and is available in black painted! b> Contents:1 set
The Samba 5ive T tuned pipe from the 1/5 world champion!At the 1/5 World Championship were place 1 to 10 (!) equipped with a samba tuned pipe system.A proof of competence without equal!BiG BELLY, special version for the 5ive-T / Monster Truck XL with engines up to 32 cm³ engine. Comes with complete hardware for installation.Top quality and optimized performance across the entire rpm range of your engine.
Genuine HPI spare/option part. Baja 5T/Rear - Losi 5ive-T Sand Buster-T Rib front and Sand Buster-T Paddle rear tires are now available from HPI Racing. These tires are designed specifically for the Baja 5T truck.Sand Busters-T Rib fronts have a rib down the center of the tire to cut through the sand for stable steering, and the Sand Buster-T Paddle rears have 10 large paddles for maximum traction in sand and soft dirt. Sand Buster's are designed for the sand, but you can also run them in loose dirt and even in the mud!Suitable for Losi 5ive-T as well (paddles all around).Contents:2 pieces / 1 pair
The Samba 5ive T tuned pipe from the 1/5 world champion!At the 1/5 World Championship were place 1 to 10 (!) equipped with a samba tuned pipe system.A proof of competence without equal!BiG BELLY, special version for the 5ive-T / Monster Truck XL with engines up to 32 cm³ engine. Comes with complete hardware for installation.Top quality and optimized performance across the entire rpm range of your engine.
Genuine Samba spare/option part.The Samba 5ive T tuned pipe from the 1/5 world champion!At the 1/5 World Championship were place 1 to 10 (!) equipped with a samba tuned pipe system.A proof of competence without equal!BiG BELLY, special version for the 5ive-T / Monster Truck XL with engines up to 32 cm³ engine. Comes with complete hardware for installation.Top quality and optimized performance across the entire rpm range of your engine.The pictures of the installed pipe, they show you the steel version with the order no.: A proof of competence without equal!BiG BELLY, special version for the 5ive-T / Monster Truck XL with engines up to 32 cm³ engine. Comes with complete hardware for installation.Top quality and optimized performance across the entire rpm range of your engine.The pictures of the installed pipe, they show you the steel version with the order no.: 4822, are for presentation purpose only.Contents:1 set
Genuine FG spare/option part.Colour: oliveContents: 5lDimensions total:Height: 260 mmLength: 260 mmWidth: 150 mmThread: Diameter 37 mm x pitch 5 mmContents:1 piece
Very nicely machined shock tower from AJA-Racing, made of high grade 7075-T6 aluminum. The increased thickness of the upper section makes bending or breaking almost impossible. Direct replacement for the stock part using OEM hardware.Content:1 piece
y0700 Double sided alloy servoarm: 9,90 EURy0700/01 Single-sided alloy servoarm: 7,90 EURy0701 Double sided split alloy servoarm: 14,90 EURy0701/01 Single-sided split alloy servoarm: 12,90 EURFor y0700, y0700/01, y0701 and y0701/01:Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaft Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVy2007 Digital large scale Brushless Servo CYS9130Nearly all Ribbe/Futaba servosMega Power servoThunder Tiger DS1015And many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarm are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.
Genuine Area spare/option part for set AREA 5T-008.Content:1 piece
Genuine Area spare/option part for the centerlink from AREA 5T-008. Content:2 x flanged ball bearings2 x steel spacers
Genuine Area spare/option part for the centerlink from AREA 5T-008.Contents:2 pieces
Genuine Area spare/option part for set AREA 5T-008. Contents:2 pieces
Genuine Area spare/option part for set AREA 5T-008.Contents:2 x ball joint with steel balls1 x turnbuckle1 x M4 mm threaded rod
Genuine Area spare/option part.CNC-machined from 6061-T6 aluminum by Area RC, come in a set of two. OEM screws have to be re-used as this set does not include any screws.Contents:2 pieces
Genuine Area spare/option part.The plate fits Losi stock servos.Replacement part for: AREA-5T-012 radio plate set V3 for Losi 5ive-T and Mini.Content:1 piece
Genuine Area spare/option part.Replacement part for: AREA-5T-012 radio plate set for Losi 5ive-T and Mini.Content:1 piece
Genuine Area spare/option part.The set includes 26 pieces each of aluminum mount washers and support dishes for a complete equipping of the genuine Losi 5ive-T or Mini body shell (replaces LOSB2582). Your choice of blue or orange anodized!Contents:26 pieces
Genuine Losi spare/option part.CNC-machined from 6061-T6 aluminum by Area RC.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: 85 grams.Content:1 piece
Genuine FG spare/option part.CNC-machined from 6061-T6 aluminum by Area RC.Contents:2 piece
Genuine Area spare/option part.CNC-machined rear shock tower from 6061-T6 aluminum by Area RC.Strong (7 mm thick), yet light weight version (98 grams). Comes with aluminum cage brackets included!Contents:1 piece
Genuine Area spare/option part.CNC-machined from 6061-T6 aluminum by Area RC. CNC-machined 6061-T6 aluminum servo clamps from Area RC distribute the load from the mounting screws equally over the complete area of the mounting tabs, protecting them against breakage. Available in two versions:0236 for stock servos in Losi 5ive and DBXL, Savöx 235 und 236, Orange Power and other servos with a mounting hole distance of 18 mm5765 für MPX Rhino, Hitec 5765 and other servos with a mounting hole distance of 16 mmContent:2 pieces
CNC-machined from 6061-T6 aluminum by Area RC, significantly stronger and more rigid than any plastic version. The length of the arm is 43 mm. AREA-XL BJ032/01 with 23 teeth, red for KO PRO, JR, Sanwa, Airtronics- and many other Servos with 23 teeth shaft
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.New improved design combines increased strength with reduced weight (69 grams).Contents:1 piece