Manufactured in high-strength alloy. Free from play, twisting-firm with exchangeable ball-type nipple. For mounting the wishbone threaded rods , , , or are needed as well as one ball-type nippe each wishbone.
Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary. Dimensions:A = 4 mmB = M7C = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces
Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 left handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with left-handed thread 10437, 10437/01 are necessary.Dimensions:A = 4 mmB = M7 l/hC = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces
Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary. Dimensions:A = 5 mmB = M7C = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces
Genuine FG spare/option part. Specially produced small hexagon nuts with right-hand thread to fix the steel ball-and-socket joints with the wishbone thread rods M7. Dimensions:Hex size: 8 mmThickness: 3 mmPart is delivered in silver or black color from vendor!Contents:1 piece
Genuine FG spare/option part. Specially produced small hexagon nuts with left-hand thread to fix the steel ball-and-socket joints with the wishbone thread rods M7.Maße:Hex size: 8 mmThickness: 3 mmPart is delivered in silver or black color from vendor!Contents:2 pieces
Retrofitable bowden cable disk brakes for Formula 1 Sportsline and Competition models. Essentially improved brake power compared to the standard brake, sensitive adjustment.
Cable: 465 mmSheath: 385 mmSpare part for .
Retrofitable bowden cable disk brakes for Formula 1 Sportsline and Competition models. Essentially improved brake power compared to the standard brake, sensitive adjustment.
Cable: 690 mmSheath: 580 mmSpare part for .
Genuine FG spare/option part. Spare part for .Content:2 pieces
Additional equipment of the front tuning disk brake compared to disk brake :- Flexible bowden cable - Alloy bowden cable holder- Alloy guiding plate with ball bearing- Steel bearing bush- Stud bolt for brake lining- Tuning brake disk- Competition brake lining
Additional equipment of the front tuning disk brake compared to disk brake :- Flexible bowden cable - Alloy bowden cable holder- Alloy guiding plate with ball bearing- Steel bearing bush- Stud bolt for brake lining- Tuning brake disk- Competition brake lining
Genuine FG spare/option part.Solid front spoiler produced in impact resistant polyamide for the FG Formula 1 models. The complete front spoiler and side parts are manufactured in one piece. The ground colour is black and can be painted over restrictively. This front spoiler is specially suited for the use at competitions. Standard equipment of F1 Competition.Contents:1 piece
Genuine FG spare/option part. The engine quick fix system enables a very fast and easy mounting of the engine. Suitable for F1 Sportsline in connection with Solo and Zenoah engines. Standard equipment of F1 Competition.Contents:1 set
Genuine FG spare/option part. Spare part for 10456.Contents:1 piece
Genuine FG spare/option part. Spare part for 10456.Content:1 piece
Clutch flange bearing for the F1 clutch bell. The clutch bell of the engine is guided through the sparate bedding of the flange bearing. Additional the clutch bell runs centrical to the clutch blocks. The mounting of the flange bearing is only possible in connection with the engine quick fix system and the short F1 clutch bell. Suitable for the F1 Sportsline in combination with Solo and Zenoah engines. Standard equipment of F1 Competition.
