10436 FG Steel ball-and-socket joint F1 Ø5/M7 right

€29.90*

Available

Product number: fg_10436

EAN: 3410564526484

Product information "10436 FG Steel ball-and-socket joint F1 Ø5/M7 right"

Genuine FG spare/option part.

Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.

For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary.

Dimensions:

A = 5 mm
B = M7
C = 14.5 mm
D = 16.5 mm
E = 45.7 mm

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

10455 FG Polyamide front spoiler for F1

Genuine FG spare/option part.Solid front spoiler produced in impact resistant polyamide for the FG Formula 1 models. The complete front spoiler and side parts are manufactured in one piece. The ground colour is black and can be painted over restrictively. This front spoiler is specially suited for the use at competitions. Standard equipment of F1 Competition.Contents:1 piece

€34.90*

This product is currently not available.

10450/01 FG Bowden cable for front disk brake for F1 - set

Cable: 465 mmSheath: 385 mmSpare part for .

€19.70*

10437 FG Hexagon nut M7 right-handed thread

Genuine FG spare/option part. Specially produced small hexagon nuts with right-hand thread to fix the steel ball-and-socket joints with the wishbone thread rods M7. Dimensions:Hex size: 8 mmThickness: 3 mmPart is delivered in silver or black color from vendor!Contents:1 piece

€4.70*

10437/01 FG Hexagon nut M7 left-handed thread

Genuine FG spare/option part. Specially produced small hexagon nuts with left-hand thread to fix the steel ball-and-socket joints with the wishbone thread rods M7.Maße:Hex size: 8 mmThickness: 3 mmPart is delivered in silver or black color from vendor!Contents:2 pieces

€4.70*

10435/01 FG Steel ball-and-socket joint F1 Ø4/M7 left

Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 left handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with left-handed thread 10437, 10437/01 are necessary.Dimensions:A = 4 mmB = M7 l/hC = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces

€29.90*

10451/05 FG Servo rods for rear disk brake F1

Genuine FG spare/option part. Spare part for .Content:2 pieces

€7.90*

10457/01 FG Clutch flanged bearing - 1pce.

Spare part for .

€98.80*

10454/02 Alloy mount for rear spoiler F1 - 4pcs.

Spare part for .

€25.90*

10435 FG Steel ball-and-socket joint F1 Ø4/M7 right

Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary. Dimensions:A = 4 mmB = M7C = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces

€29.90*

10459 FG Belt stretcher for F1

Genuine FG spare/option part.The belt stretcher allows an optimal adjustment of the belt tension only through loosering or tightening of a belt stretching screw. For a change of toothed belt or gear disk a moving and adjusting of the engine is not necessary anymore. If you have a F1 Sportsline the belt stretcher can only be mounted in connection with the engine quick fastening, the clutch flange bearing and the clutch bell. The belt stretcher is standard equipment of the F1 Competition.Contents:1 set

€46.80*

10459/02 FG Alloy shaft for belt stretcher

Genuine FG spare/option part.Spare part for 10459.Contents:1 piece

€10.70*

10457/03 FG Spacer 5,1/10x16mm - 3pcs.

Spare part for .

€6.60*

Customers also viewed

- GWH04-XM2 GRP W04 REVO XM2 Tyres Medium

This pair of Tyres have the following use indications: HIGH GRIP situation for clean track. HIGH GRIP situation for big asphalt. HIGH GRIP situation for high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!

€38.90*

4466/05 FG Ball-and-socket joint

Genuine FG spare/option part. Alternative: y1036Contents:2 pieces

€23.80*

y1528 Bearing puller for differentials

Genuine HT spare/option part. Bearing puller especially for the disassembly of ball bearings from differentials.The arms are reliably fixed at the set distance by an adjustment cone, which makes the use of this puller very easy. The thin hooks allow the use even with little space between ball bearing and differential.Dimensions: Min. opening width: 17 mm Max. opening width: 50 mm Max. height from the Clutch: 25 mmContents:1 piece

€19.90*