10459 FG Belt stretcher for F1

€46.80*

Available

Product number: fg_10459

Product information "10459 FG Belt stretcher for F1"

Genuine FG spare/option part.

The belt stretcher allows an optimal adjustment of the belt tension only through loosering or tightening of a belt stretching screw.
For a change of toothed belt or gear disk a moving and adjusting of the engine is not necessary anymore.

If you have a F1 Sportsline the belt stretcher can only be mounted in connection with the engine quick fastening, the clutch flange bearing and the clutch bell.

The belt stretcher is standard equipment of the F1 Competition.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Accessories / Spare parts

10456 FG Engine quick fix system for F1

Genuine FG spare/option part. The engine quick fix system enables a very fast and easy mounting of the engine. Suitable for F1 Sportsline in connection with Solo and Zenoah engines. Standard equipment of F1 Competition.Contents:1 set

€107.95*

10457 FG Clutch flange bearing - set

Clutch flange bearing for the F1 clutch bell. The clutch bell of the engine is guided through the sparate bedding of the flange bearing. Additional the clutch bell runs centrical to the clutch blocks. The mounting of the flange bearing is only possible in connection with the engine quick fix system and the short F1 clutch bell. Suitable for the F1 Sportsline in combination with Solo and Zenoah engines. Standard equipment of F1 Competition.

€118.95*

10458 FG Clutch bell for F1 short - 1pce.

Clutch flange bearing for the F1 clutch bell. The clutch bell of the engine is guided through the sparate bedding of the flange bearing. Additional the clutch bell runs centrical to the clutch blocks. The mounting of the flange bearing is only possible in connection with the engine quick fix system and the short F1 clutch bell. Suitable for the F1 Sportsline in combination with Solo and Zenoah engines. Standard equipment of F1 Competition.Shaft size length x diameter: 45 x 10 mm

€39.90*

10459/01 FG Draw spindle for belt stretcher

Genuine FG spare/option part.Spare part for 10459.Contents:1 piece

€11.30*

10459/02 FG Alloy shaft for belt stretcher

Genuine FG spare/option part.Spare part for 10459.Contents:1 piece

€10.70*

Kunden haben auch gesehen

10458 FG Clutch bell for F1 short - 1pce.

Clutch flange bearing for the F1 clutch bell. The clutch bell of the engine is guided through the sparate bedding of the flange bearing. Additional the clutch bell runs centrical to the clutch blocks. The mounting of the flange bearing is only possible in connection with the engine quick fix system and the short F1 clutch bell. Suitable for the F1 Sportsline in combination with Solo and Zenoah engines. Standard equipment of F1 Competition.Shaft size length x diameter: 45 x 10 mm

€39.90*

y0716/01 Torx screwdriver spare blades

Very high quality Torx screwdriver blades with ¼ hexagon shaft and engraved size indication.Sizes T7 to t25 are usually required for rc-cars.Available sizes:T6, T7, T8, T9, T10, T15, T20, T25

€5.90*

LOS251122 Losi Brake Disc, Pad & Screws for DBXL 2.0

Genuine Losi spare/option part. Contents:1 set

€29.99*

6479 FG Rear alloy uprights 08

Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (wishbone pin), too. Fits the rear axle of all FG offroad cars (2WD and 4WD) and all Carson / Smartech cars.Content:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm

€133.95*

5438 FG Body detailing kit for Mini Cooper/Trophy

Genuine FG spare/option part. Suitable for FG Mini Cooper / Trophy bodies.The set includes:WiperRight/left mirrowsDoorhandleRoof antennaMounting screws for the mirrows

€19.00*

Mammoth Supergrip for 1/6 and 1/5 offroad cars glued, 1 pair.

Mammoth Supergrip complete gluedMammoth Supergrip for 1/6 and 1/5 offroad carsParking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURPrices Total:85,80 EUR105,70 EUR / Set= 191,50 EURHT prices Total:82,70 EUR86,90 EUR / Set= 169,90 EUR================================Also suitable for:With the following wheel adapter: y1183 Rim adapter

Variants from €69.90*

€74.90*