10435 FG Steel ball-and-socket joint F1 Ø4/M7 right

€29.90*

Available

Product number: fg_10435

EAN: 3410564526460

Product information "10435 FG Steel ball-and-socket joint F1 Ø4/M7 right"

Genuine FG spare/option part.

Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 right handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.

For mounting the wishbone thread rods M7 and hexagon nuts M7 with right-handed thread 10437, 10437/01 are necessary.

Dimensions:

A = 4 mm
B = M7
C = 14.5 mm
D = 16.5 mm
E = 45.7 mm

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

y1218 Springs for drive shafts

Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

7385/03 FG Piston ring 26 cm³ for Zenoah

Genuine FG spare/option part.Contents:1 piece

€19.90*

2012-144 Mecatech Retainer Ring for Shocks

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€3.80*

Details

10437 FG Hexagon nut M7 right-handed thread

Genuine FG spare/option part. Specially produced small hexagon nuts with right-hand thread to fix the steel ball-and-socket joints with the wishbone thread rods M7. Dimensions:Hex size: 8 mmThickness: 3 mmPart is delivered in silver or black color from vendor!Contents:1 piece

€4.70*

10437/01 FG Hexagon nut M7 left-handed thread

Genuine FG spare/option part. Specially produced small hexagon nuts with left-hand thread to fix the steel ball-and-socket joints with the wishbone thread rods M7.Maße:Hex size: 8 mmThickness: 3 mmPart is delivered in silver or black color from vendor!Contents:2 pieces

€4.70*

4429 FG Steel balljoint

Genuine FG spare/option part. Steel ball-and-socket-joint with 5mm bore in the ball and M6 right-handed thread for use with the wishbones. For the installation are needed the adjusting screws 4430 or 4431. The delivery contains all needed pin disks. Dimensions:A = 5 mmB = M6C = 8 mmD = 15.5 mmE = 37 mmContents:2 pieces

€42.30*

Similar products

10455 FG Polyamide front spoiler for F1

Genuine FG spare/option part.Solid front spoiler produced in impact resistant polyamide for the FG Formula 1 models. The complete front spoiler and side parts are manufactured in one piece. The ground colour is black and can be painted over restrictively. This front spoiler is specially suited for the use at competitions. Standard equipment of F1 Competition.Contents:1 piece

€34.90*

Details

10450/01 FG Bowden cable for front disk brake for F1 - set

Cable: 465 mmSheath: 385 mmSpare part for .

€19.70*

10437 FG Hexagon nut M7 right-handed thread

€4.70*

10451/05 FG Servo rods for rear disk brake F1

Genuine FG spare/option part. Spare part for .Content:2 pieces

€7.90*

10435/01 FG Steel ball-and-socket joint F1 Ø4/M7 left

Genuine FG spare/option part. Solid steel ball-and-socket joints with 4mm boring in the steel ball and M7 left handed thread. Clearance- and maintenance-free. Useable for the F1 front and rear axle instead of the plastic ball-and-socket joints 10mm 10027 and 10027/07.For mounting the wishbone thread rods M7 and hexagon nuts M7 with left-handed thread 10437, 10437/01 are necessary.Dimensions:A = 4 mmB = M7 l/hC = 14.5 mmD = 16.5 mmE = 45.7 mmContents:2 pieces

€29.90*

10437/01 FG Hexagon nut M7 left-handed thread

€4.70*

10451/01 FG Bowden cable for rear disk brake F1 - 1pce.

Cable: 690 mmSheath: 580 mmSpare part for .

€23.90*

10458 FG Clutch bell for F1 short - 1pce.

Clutch flange bearing for the F1 clutch bell. The clutch bell of the engine is guided through the sparate bedding of the flange bearing. Additional the clutch bell runs centrical to the clutch blocks. The mounting of the flange bearing is only possible in connection with the engine quick fix system and the short F1 clutch bell. Suitable for the F1 Sportsline in combination with Solo and Zenoah engines. Standard equipment of F1 Competition.Shaft size length x diameter: 45 x 10 mm

€39.90*