8493/05 FG bearing set 15x28x7 with grease filling

€11.90*

Available

Product number: fg_8493_05

EAN: 3410564522356

Product information "8493/05 FG bearing set 15x28x7 with grease filling"

Genuine FG spare/option part.

Fits GPM center diff mounts for Losi 5ive series cars as well.
FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

Ball bearings for FG, sealed, diverse sizes

Genuine HT spare/option part. Dimensions:Alloy differentials 15 x 28 x 7 mmPlastic differentials 12 x 28 x 8 mmClutch bell(except standard Formula 1) 10 x 22 x 6 mmLayshaft 10 x 19 x 7 mm Wheel bearing 8 x 22 x 7 mmContents:1 pair / 2 pieces

€10.70*

Details

y19018 FG/Carson/Smartech 2WD ball bearing set, sealed, set

Contains all bearings for the specified FG-car.Complete ball bearing set for all FG touring and offroad 2WD cars (your choice of plastic or alloy diff case). Not suitable for WB535 Modelle.The set includes:wheel bearing, 8 pcs., 8x22x7 mmclutch bell bearing, 2 pcs., 10x22x6 mmlayshaft bearing, 2 pcs., 10x19x7 mmdiff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.

€69.90*

Details

Similar products

8493 FG Ceramic ball bearings, sealed, 15 x 28 x 7 mm

Genuine FG spare/option part.Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Suitable for all FG alloy differentials. Fits GPM center diff mounts for Losi 5ive series cars as well.Contents:2 pieces

€31.90*

8479 FG Steel bush for brake caliper - 2pcs.

Hardened steel bushes for all caliper of the front and rear disk brakes. In combination with a ball-beared guide plate optimal position of the brake eccentric.Substitute for , , , , and .

€7.90*

8483/05 FG Alloy differential for 1:5 and 1:6

Genuine FG spare/option part. Alloy differential for 1:5 and 1:6 recommended for competitions. This differential is not adjustable but very solid because of its metal housing. The diff will delivery complete with bevel gears and ball bearings.The big gearwheel and the axle spline drive will not delivery!Content:1 set

€137.50*

Details

8496/02 FG Adjustment screw - 2pcs.

Item N°8496/02 Adjustment screw - 2pcs.Spare part for .Total length: 23 mmThread: M5Pin: 4 mmPart is delivered in silver or black color from vendor!

€5.90*

8489 FG O-Ring - 2pcs.

Suitable for all alloy differential housings.

€3.90*

8472/01 FG Flexible long bowden cable for rear disk brake - 1pce.

Cable: 350 mmSheath: 270 mmSpare part for , , , , and .

€17.50*

8495 FG Shims for alloy differential

Genuine FG spare/option part.For adjustment of the bevel gears in the differential.Dimensions:2 pieces: each 5 x 17 x 0.1 mm2 pieces: 8 x 20 x 0.1 mmContents:4 pieces

€9.90*

8494/01 FG Torx screw set for alloy differential

Genuine FG spare/option part.Torx screw set suitable for all FG alloy differential gears.Part is delivered in silver or black color from vendor!

€8.70*

8491 FG Thrust ball bearing 5x12x4mm - 1pce.

The bearing consists of cage with balls and two housing washers.Spare part for .

€12.90*

8469 FG Guiding plate ball-beared

Alloy guiding plate for brake disk, ball beared.Substitute for , , , , and .Content:2 pieces

€39.90*

8485/05 FG Alloy differential adjustable - 1pce.

Item N° 8485/05 Alloy differential adjustable - 1pce.Adjustable alloy differential, external blocking from 0% to 90%, less slippage at the rear axle. Suitable for all 1:5 models, Race-Trucks and Formula 1 models with horizontal engine.

€149.50*

Details

8473/01 FG Flexible short bowden cable for rear disk brake - 1pce.

Cable: 225 mmSheath: 150 mmSpare part for , , , , and .

€17.10*

Customers also viewed

8493 FG Ceramic ball bearings, sealed, 15 x 28 x 7 mm

€31.90*

y1570 CYS S0650 large scale servo with Double sided alloy servoarm, 55 kg/0,11 sec

CYS S0650, a digital large scale servo with very robust steel gears. It offers a lot of power at good speed. Its a direct fit for cars like Losi 5ive and DBXL, UFRC Growler GX1, FG and so on.Technical data: Operating voltage: 6V-7.4V Operating speed (6.0 V): 0.13 s / 60 degrees Operating speed (7.4 V): 0.11 s / 60 degrees Holding torque (6.0V): 470 Ncm holding torque (7.4V): 539 Ncm Cable: Universal/JR connector, approx. 300mm Gear material: 1st stage brass, all others steel Bearing: 2 x ball bearing Size: 66 x 30 x 56mm Weight: 204 grams Double sided servo arm 68mm length Guide sleeve 4 pieces Mounting screws 4 pieces Mounting screws for servoarm 1 piecesContents:1 piece

€69.90*

14000E Sportsline 2WD 465 electric incl. unpainted Porsche GT2 bodywork

Original FG spare/tuning part. The following items are required for completion:- E-motor, ESC, steering servo, transmitter system, LiPo drive batteries and charger. The models are built on a 4 mm aluminium chassis with double wishbones on the rear and front axles. All holes in the aluminium chassis for attaching the chassis parts are countersunk from below. The camber, caster and toe-in can be adjusted on the front and rear axles using track rods or adjusting screws with right/left-hand thread. Further equipment points are: Differential gear, smooth-running FG ball drive, oil-pressure shock absorbers with volume compensation and external adjustment ring for the spring preload. All rotating drive parts such as shafts, axles etc. are mounted on ball bearings. The tyres are glued to the rim. Not included : - RC system - 1100 KV brushless motor - 160A controller - Servo- You will also need Lexan paint and a decal sheet.Dimensions : - Length......840 mm - Width.....395 mm - Height.......250 mm - Wheelbase...465 mm

€929.90*

6099 FG Front shock mount

Original FG Ersatz-/Tuningteil.Suitable for all FG models except monster/stadium models with dual shock axles.Inhalt:1 Stück

€13.50*

10008 FG Formula 1 Competition with hydraulic brake "special price"

Special offer price ! Including Mecatech Expert hydraulic brake on the front axle. Numerous aluminium parts such as front and rear bearings, damper linkage, engine mount, wishbone ends. Uniball steel ball joints, which allow all possible adjustments of the front and rear axle, gear drive, which ensures high reliability and optimum function. Like all FG Competition models, the Formula Competition from FG is the most successful model of recent years. The experience gained from the competitions has been incorporated into the latest version. With FG gear drive, which is extremely smooth-running and provides more power reserves. With this version, FG Modellsport has certainly created a competition-ready model for the years to come that will seamlessly build on past successes. Highlights Aluminium wishbones FG Gear drive Aluminium rear axle plate FG Adjustable aluminium shock absorbers Aluminium servo saver with ball bearings 26 cc Zenoah engine Airbox Resonance pipe system Mecha. rear disc brakes 5 mm chassis Lexan bodyworkAnother improvement is the hydraulic disc brake in the front wheels.Technical description of the FG Formula 1 Competition kit. The chassis of the FG Formula 1 Competition is built on a 5mm aluminium chassis and all screws at the bottom of the chassis are countersunk. The front and rear axle carriers as well as the engine unit are connected to each other over the entire length of the chassis, so that almost the rigidity of a monocoque chassis is achieved. The engine is fixed in place using a quick-release fastener, making it possible to change the engine quickly. The rear axle is driven by several smooth-running spur gears and an FG ball drive on the rear axle. The clutch bell is held by a separate flange bearing to reduce the load on the crankshaft. The front and rear axle with versatile adjustment options such as camber, caster, etc. consists of aluminium wishbones at the bottom. Sturdy aluminium rear axle plates reduce wear on the rear axle and provide enormous driving stability. Four oil-pressure shock absorbers, which are actuated via a push-rod suspension, and stabilisers ensure optimum ground contact.The model is powered by a powerful 26 cc engine with airbox and resonance silencer.The chassis is supplied with tuning bowden cable brakes for the rear axles.Equipment of the FG Formula 1 Competition kit 5 mm aluminium chassis, 26 cm³ engine, intake noise filter, tuning resonance silencer, FG gear drive, ball drive, complete rear axle and front axle carrier unit with integrated quick engine mounting, double aluminium wishbone mountings, aluminium triangular wishbones at the bottom of the rear axle and front axle, front and rear aluminium steering knuckles, ball bearing servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes at the front and rear. Servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes front and rear, anti-roll bar for front and rear axle, 10 mm aluminium balls, polycarbonate body, polyamide front spoiler, receiver box, competition tyres with tyre inserts. The models are supplied as a kit with assembly instructions. The body parts are made of crystal-clear polycarbonate for self-painting. FG stickers and lettering are included. To complete the models, you will also need: 1 remote control system (transmitter, receiver), 1 large servo for the steering (approx. 40 - 50 kg), 2 servos for throttle/brake (approx. 20 - 30 kg), batteries and charger. These parts are not included and must be ordered or delivered separately if installation is required!IncludetZenoah 26cc engineClear bodyshell and polycarbonate spoilerMechanical brakes rearHydr. brakes frontDimensionsLength: 960mmWidth: 440mmHeight: 230mmWheelbase: 620mmFormular 1 models in action!Drive:2WDMotorization:GasRTR:Without RTRScale:1/5

€2,599.00*

Configure now