Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6069/02 FG Differential drive cups for ball drive - 1pce.

Product information "6069/02 FG Differential drive cups for ball drive - 1pce."

Genuine FG spare/option part.

Spare part for FG ball drive.

Dimensions:
  • Shaft:
    • Diameter: 8 mm
    • Length: 27 mm
    • Spline drive: for FG bevel gears
  • Cup:
    • Diameter: 18,5 mm
    • Length: 18 mm


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

y1004 Driveshaft boots for ball drive + dogbones
Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

Alternatives

Average rating of 0 out of 5 stars

GPM 6069/02 Ball drive differential drive cup for all FG and Mecatech cars, 1 pce.
Fits all FG cars and the Mecatech FW01. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Diameter: 8 mmTotal length 45 mm

From €34.90*

Average rating of 0 out of 5 stars

y1004 Driveshaft boots for ball drive + dogbones
Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Customers also bought

Average rating of 0 out of 5 stars

6071 FG Alloy rear axle brace
Genuine FG spare/option part. Suitable for all FG models except Formula 1 and Evo. Mounting holes for 4 mm bolts.Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

6712/25 FG Countersunk sheet metal screws 4,2x25 mm, 20 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:20 pieces

€4.30*

Average rating of 0 out of 5 stars

6079/05 FG Ball driving axle M8
Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€32.95*

Average rating of 0 out of 5 stars

7011 FG Front body mount
Genuine FG spare/option part. Fits FG Ecoline and Sportsline with the following body shells:2049 McLaren2064 Ferrarie 3604049 Audi A47164 ITC Mercedes7169 Peugeot7249 Mercedes CLK-DTM7254 Honda7259 Opel V88044 BMW 3201049 Ren. Megan5049 New Beetle5064 Chrysler Viper5154 Porsche GT25160 Porsche GT39149 Mercedes CLK-GTR9159 Porsche GT19054 Mercedes C291Contents:2 pieces

€7.90*

Similar products

Average rating of 0 out of 5 stars

6069/01 FG Differential axle spline drive
Genuine FG spare/option part.For all FG cars with standard drive shafts (no ball drive). Accepts dogbones with 10 mm ball and 4 mm pin.Dimensions:Shaft, diameter: 8 mmLength: 27 mmSpline drive for FG bevel gearsCup, diameter: 18,5 mmLength 14 mmContents:1 piece

€29.00*

Average rating of 0 out of 5 stars

6080 FG Rear dogbone
Genuine FG spare/option part. Replacement drive shaft (dogbone). Long Version.Suitable for BMW GTR, Mercedes CLK-GTR, Race-Trucks, C291, Porsche GT1, GT2, GT3 and all FG Off-Road models.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 101,5 mmContents:1 piece

€19.00*

Average rating of 0 out of 5 stars

6077/05 FG Steel ball 10x13mm for rear upright - 2pcs.
Steel ball for rear upright.5 mm bore diameter

€9.50*

Average rating of 0 out of 5 stars

6079/05 FG Ball driving axle M8
Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€32.95*

Average rating of 0 out of 5 stars

6081/01 FG Steel ball Ø5mm 10x15 mm
Genuine FG spare/option part. Ball joint with 5mm bore suitable for all FG plastic ball-and-socket joints.Contents:4 pieces

€17.50*

Average rating of 0 out of 5 stars

6079 FG Rear axle shaft
Genuine FG spare/option part. Dimensions:Total length 73 mmLength of M6 thread section 11 mmLength of 8 mm shaft incl. thread 59 mmLength of drive cup 14 mmContents:1 piece

€31.90*

Average rating of 0 out of 5 stars

6065/01 FG Plastic diff. cover
Original FG Ersatz-/Tuningteil.Well-priced but still effective plastic diff. cover. Stones can damage metal covers and it is difficult to removethem. According to the flexible plastic material an impressing becomes hardly possible. If it still happens the cover can be easily removed through cutting with a knife or a scissors.Dimensions:Length: 43 mmDiameter: 45 mmFlange diameter: 65 mmInhalt:1 Stück

€7.50*

Average rating of 0 out of 5 stars

6077/08 FG Spacer bushing for rear upright
Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

6071 FG Alloy rear axle brace
Genuine FG spare/option part. Suitable for all FG models except Formula 1 and Evo. Mounting holes for 4 mm bolts.Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

6064 FG Differential case
Genuine FG spare/option part. Stock plastic differential case. Also available in aluminum.Dimensions:Length: 70 mmDiameter: 42.5 mmFlange diameter: 65 mmBearing seats: 12 x 8 mmShaft bore: 8 mmInner dimensions: 40 x 30 mmContents:1 piece

€27.00*

Average rating of 0 out of 5 stars

6057 FG Window grid r/h
Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 195 mmHeight: 80 mmContents:1 piece

€16.90*

Average rating of 0 out of 5 stars

6058 FG Window grid front
Genuine FG spare/option part. Suitable for 6154, 6155, 6154/03.Dimensions:Width: 115 mmHeight: 110 mmContents:1 piece

€16.90*

Customers also viewed

Average rating of 0 out of 5 stars

6069/01 FG Differential axle spline drive
Genuine FG spare/option part.For all FG cars with standard drive shafts (no ball drive). Accepts dogbones with 10 mm ball and 4 mm pin.Dimensions:Shaft, diameter: 8 mmLength: 27 mmSpline drive for FG bevel gearsCup, diameter: 18,5 mmLength 14 mmContents:1 piece

€29.00*

Average rating of 0 out of 5 stars

GPM 6080/01 Ball driveshaft for 96,5 mm FG cars, 1 pce.
Fits all FG offroad / monster and stadium models (except Leopard 2010 up). Also for FG Formula 1 and Race Truck models. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Length 96.5 mm

From €19.90*
%

Average rating of 0 out of 5 stars

AREA-MCD-003 Aluminum clutch bell holder for MCD RR5/XS5
CNC-machined from 6061-T6 aluminum clutch bell holder by Area RC for MCD RR5/XS5. Open design for maximum clutch cooling and reduced weight. Comes with aluminum mesh plate included.

€47.45* €94.90* (50% saved)

Average rating of 0 out of 5 stars

LOSB2579 Losi Rear Top & Side Cage Set: 5T, set
Item N° LOSB2579Rear Top & Side Cage Set: 5T, set

€49.99*

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

6076/01 FG Rear camber rod 61 mm
Genuine FG spare/option part. M8 turnbuckle.Contents:2 pieces

€13.00*

Average rating of 0 out of 5 stars

67577 FG Drive shaft 134 mm
Genuine FG spare/option part. Please note: If you own a Leopard 2WD with the old 130.5 mm driveshafts (same part number), the upgrade of both shafts is recommended.Contents:1 piece

€19.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development