6036 FG Ceramic ball bearings, sealed 10x19x7 mm

€20.90*

Available

Product number: fg_6036

EAN: 4058575001539

Product information "6036 FG Ceramic ball bearings, sealed 10x19x7 mm"

Genuine FG spare/option part.

Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.

Are used in all FG and Carson models for bearing the gearshaft.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

Ball bearings for FG, sealed, diverse sizes

Genuine HT spare/option part. Dimensions:Alloy differentials 15 x 28 x 7 mmPlastic differentials 12 x 28 x 8 mmClutch bell(except standard Formula 1) 10 x 22 x 6 mmLayshaft 10 x 19 x 7 mm Wheel bearing 8 x 22 x 7 mmContents:1 pair / 2 pieces

€10.70*

Details

y19018 FG/Carson/Smartech 2WD ball bearing set, sealed, set

Contains all bearings for the specified FG-car.Complete ball bearing set for all FG touring and offroad 2WD cars (your choice of plastic or alloy diff case). Not suitable for WB535 Modelle.The set includes:wheel bearing, 8 pcs., 8x22x7 mmclutch bell bearing, 2 pcs., 10x22x6 mmlayshaft bearing, 2 pcs., 10x19x7 mmdiff bearing, 2 pcs., 12x28x8 mm for plastic diff case or 15x28x7 mm for aluminum diff case.

€69.90*

Details

Similar products

6038 FG Engine mount washers for M4 and M4 screws

Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces

€6.50*

6029/08 FG Ball-and-socket joint for M8

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

6051 FG Dampening rubber

Genuine FG spare/option part. Rubber pucks for all standard design FG spur gear carriers.Dimensions:Outside diameter: 16 mmInner diameter: 7 mmHeight: 6 mmContents:4 pieces

€9.50*

6041 FG Steel layshaft 10 mm

Genuine FG spare/option part. For all FG models except Formula 1.Dimensions:Length: 103 mmDiameter: 10 mmImportant:When installed in a Carson / Smartech model the brake hub is fastened with a screw stomach.Content:1 piece

€23.90*

6028/01 FG Track rod left/right 74mm for 1:6 models

Genuine FG spare/option part. Fits all FG 1/6 off road cars, alloy version.Length of threaded section approx. 17 mm.Contents:2 pieces

€13.90*

6029/07 FG Ball-and-socket joint for M6

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M6 thread rods. Replacement for the plastic ball-and-socket joints 6029.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

6050 FG Plastic gear carrier 60 mm

Genuine FG spare/option part. Plastic version, 60 mm diameter. For 48T - 46T spur gears.Also available in aluminum .Content:1 piece

€13.50*

6025/02 FG servo saver spring

Genuine FG spare/option part. Dimensions:Wire diameter: 3 mmInner diameter of eyelet: 12.3 mmContents:1 piece

€7.90*

6052 FG Plastic gearwheel 48 teeth

Genuine FG spare/option part. Stock spur gear for all FG monster cars.Suitable for spur gear carriers: 6050 (plastic) 6439 (aluminum)Dimensions:Diameter: 75 mmWidth: 15.5 mmTooth width: 12 mmModule: m=1,5 Contents:1 piece

€17.90*

6037/01 FG Steel mounting plate - 2pcs.

Item N° 6037/01 Steel mounting plate - 2pcs.Connects the large engine mount to the engine flange on all FG cars except evo 04 / evo 07 / competition 07Bulk:large extent plate:length: 35 mmwidth: 10 mmheight: 2 mmsmall extent plate:length: 25 mmwidth: 10 mmheight: 2 mm

€8.90*

Details

6045/01 FG Brake shaft 97 with brake lever

Genuine FG spare/option part. For single disc brake only.Measures:Length: 91 mmDiameter: 6 mmThread: M3Contents:1 set

€14.50*

6034/01 FG Plastic part for stiffening brace

Genuine FG spare/option part. Necessary for installation of 6034.Dimensions:Length: 35 mmDiameter thicker part: 10 mmDiameter thin part: 76 mmThread: M4Contents:2 pieces

€4.90*

Customers also viewed

68501 FG 4WD conversion kit for 2WD Marder

Genuine FG spare/option part. Fits FG 2WD Marder.Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.Contents:1 set

€399.95*

Ball bearings for FG, sealed, diverse sizes

lager_0003 Size: y19611 For wheel bearing, 2 pieces

€10.70*

TT1030/02 Top Tuning CAR-STAND Set incl. tool tray and transport bag

The set consists of: - TT1030 Top Tuning CAR-STAND for 1:5, 1:6, 1:8 and 1:10 models. - TT1030/01 Top Tuning Tool Tray - y0550 Carrying bagIdeal work stand with extra wide tripod up to 100 kg. load capacity with excellent stability, even on uneven (!) urface.Specially made support mechanism, individually adjustable width from 115 mm to 375 mm for most RC cars from 1/10 to 1/5 scale.incline from 0 to 90°Quickly folded and loadedFor easy storage, as well as for transport completely foldable! (Carrying bag available!)Height adjustment of the support from 635 mm to 1000 mm and inclination from 0-90° Length of the support surface 386 mmBis zu 100Kg belastbar!Support mechanism continuosly adjustable in widthDue to various adjustment options, the Top Tuning CAR STAND offers the optimal possibilities for making adjustments or maintenance work on the RC car.The load capacity and stability are beyond doubt with a load limit of 100 kg and the extremely stable tripod.The up to 90 ° adjustable slant shows your RC car at events and presentations, as well as in your assembly room to its best advantage!6.5 kg. weightPivoting bracketHeight adjustable from 69 to 104 cmBasic frame is made of steel, painted or chromedCar bracket is made of aluminum and stainless steelA tool holder TT1030/01 is also available as an accessory in our shop selection.

€239.00* €299.70* (20.25% saved)

6036/05 FG bearing set 10x19x7 with grease filling - 2 pcs

Item N° 6036/5 FG bearing set 10x19x7 with grease filling - 2 pcs

€15.90*

Details