8498/01 FG Needle bearing for alloy differential - set

€29.95*

Available

Product number: fg_8498_01

EAN: 3410564522448

Product information "8498/01 FG Needle bearing for alloy differential - set"

Precision roller bearing with distance bush. Suitable for alloy differential 1:5 and 1:6 instead of plastic bearing bush.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

8493 FG Ceramic ball bearings, sealed, 15 x 28 x 7 mm

Genuine FG spare/option part.Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Suitable for all FG alloy differentials. Fits GPM center diff mounts for Losi 5ive series cars as well.Contents:2 pieces

€31.90*

8472/01 FG Flexible long bowden cable for rear disk brake - 1pce.

Cable: 350 mmSheath: 270 mmSpare part for , , , , and .

€17.50*

8496/02 FG Adjustment screw - 2pcs.

Item N°8496/02 Adjustment screw - 2pcs.Spare part for .Total length: 23 mmThread: M5Pin: 4 mmPart is delivered in silver or black color from vendor!

€5.90*

8495 FG Shims for alloy differential

Genuine FG spare/option part.For adjustment of the bevel gears in the differential.Dimensions:2 pieces: each 5 x 17 x 0.1 mm2 pieces: 8 x 20 x 0.1 mmContents:4 pieces

€9.90*

8489 FG O-Ring - 2pcs.

Suitable for all alloy differential housings.

€3.90*

8483/05 FG Alloy differential for 1:5 and 1:6

Genuine FG spare/option part. Alloy differential for 1:5 and 1:6 recommended for competitions. This differential is not adjustable but very solid because of its metal housing. The diff will delivery complete with bevel gears and ball bearings.The big gearwheel and the axle spline drive will not delivery!Content:1 set

€137.50*

8479 FG Steel bush for brake caliper - 2pcs.

Hardened steel bushes for all caliper of the front and rear disk brakes. In combination with a ball-beared guide plate optimal position of the brake eccentric.Substitute for , , , , and .

€7.90*

8473/01 FG Flexible short bowden cable for rear disk brake - 1pce.

Cable: 225 mmSheath: 150 mmSpare part for , , , , and .

€17.10*

8491 FG Thrust ball bearing 5x12x4mm - 1pce.

The bearing consists of cage with balls and two housing washers.Spare part for .

€12.90*

8469/01 FG Ball bearing flange for guiding plate

Genuine FG spare/option part.Spare part for , , , , and .Dimensions:Outer diameter 5 mmInner diameter 8 mmWidth 2.5 mmContent:2 pieces

€17.50*

8469/02 FG Guiding plate - 2pcs.

Alloy guiding plate for brake disk,.Substitute for , , , , and .

€14.00*

8494/01 FG Torx screw set for alloy differential

Genuine FG spare/option part.Torx screw set suitable for all FG alloy differential gears.Part is delivered in silver or black color from vendor!

€8.70*

Customers also viewed

y1402/01 MadMax CROSS BOND 170x80/x60 tires for FG/Smartech and other (18 mm square drive)

CROSS BOND 170 x 80 mm and 170 x 60 mm tires mit MadMax Extreme 20 bolt-beadlock rims with 18 mm wheel square and reinforced beadlock rings were designed for use on loose surfaces. The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside. Due to the extreme load created by the MadMax CROSS BOND tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 18 mm square wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

€119.90*

Configure now

FG 66291/09 Aluminium spacer sleeve, 4 pieces

Original FG spare part Suitable for shock absorber FG66294 and FG 66295. Dimensions: Length 8 mm Diameter 8.8/10.2 mm Bore 4.1 mm 4 piece

€11.90*

8485/01 FG Alloy differential adjustable for 1:5 conversion kit - 1pce.

The conversion kit includes all parts needed for a conversion from a standard plastic differential to an adjustable alloy differential.Please note: The differential comes unassembled, we recommend assembly tool

€118.95*

4466 FG Rose joint for alloy wishbone

Suitable for , , , , , , , , , , and Elcon Monster-Truck front axle.A = 5 mmB = 6 mmC = 8 mmD = 13 mmContent:2 pieces

€51.90*