7389 FG Original Zenoah 4 Bolt rubuild kit from 23 cm³ to 26 cm³ for the G240

€74.90*

Available

Product number: fg_7389

EAN: 3410564531877

Product information "7389 FG Original Zenoah 4 Bolt rubuild kit from 23 cm³ to 26 cm³ for the G240"

Cylinder-piston repair kit for Zenoah engine G240 (to increase displacement to 26 cm³).
Set includes the following parts:

Cylinder
Piston
Piston ring
Cylinder foot gasket
Piston pin
Piston pin clip
Spark plug

More power through more displacement!

Please note that fhe following limimitations for displacement apply at official races:

1/5 ON-ROAD 2WD max.	23 cm³
1/5 ON-ROAD 4WD max.	26 cm³
1/5 Formula 1 max.	26 cm³
1/6 OFF-ROAD 2WD + 4WD	26 cm³

Please note:

It is recommended to use a gasket sealer with every gasket on an engine.
This gives better sealing anda longer lasting gasket. We also recommend:

More power through more displacement!

Please note that fhe following limimitations for displacement apply at official races:

1/5 ON-ROAD 2WD max. 23 cm³
1/5 ON-ROAD 4WD max. 26 cm³
1/5 Formula 1 max. 26 cm³
1/6 OFF-ROAD 2WD + 4WD 26 cm³

Please note:
It is recommended to use a gasket sealer with every gasket on an engine.
This gives better sealing anda longer lasting gasket. We also recommend:

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

y19015 Bindulin Dichtfix (untill 180°!)

Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams

Content: 45 Gramm (€331.11* / 1000 Gramm)

€14.90*

y0994 Marston heat-proof sealer - 1pce.

Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube

Content: 80 Milliliter (€123.75* / 1000 Milliliter)

€9.90*

y0807 MD-Sil RTV silicone sealer

Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml

Content: 80 Milliliter (€211.25* / 1000 Milliliter)

€16.90*

Similar products

7388 FG Gasket kit Zenoah G230/G260R, CY

Genuine FG spare/option part. Gasket kit for the Zenoah engines G230 and G260RC. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Set includes the following parts:7332 Silencer gasket for CY / Zenoah7335 Insulator gasket for CY / Zenoah7337 Carburetor gasket for Zenoah, CY7305/08 Crankcase gasket for CY / Zenoah 7306/09 Special Cylinder foot gasket CY / Zenoah Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€12.50*

7373 FG Pump for CY / Zenoah

Genuine FG spare/option part.Contents:1 piece

€9.90*

Details

7375 FG Carburetor screw for CY / Zenoah / Fuelie

Genuine FG spare/option part.4-40 UNC x 1/8"Part is delivered in silver or black color from vendor!Content:1 piece

€3.20*

7398 FG Alloy fixing plate for CY / Zenoah G230/240/260/270

Genuine FG spare/option part. Suitable for CY / Zenoah G230/240/260/270.Contents:1 piece

€21.90*

7370 FG Diaphragm for CY / Zenoah

Genuine FG spare/option part.Set includes diaphragm and gasket.Contents:2 pieces

€32.90*

7407/03 FG Silicon tube Ø45 x 10 x 2mm

Genuine FG spare/option part.Replacement part for 7407 CFRP supporting brace f. Tun. pipe, set Contents:2 pieces

€4.50*

7395/01 FG Carburetor support high for Zenoah G230/260/240/270 - set

This carburetor supoort sits beneath the air filter and prevents therefore widely arising vibrations.

€22.45*

7385/03 FG Piston ring 26 cm³ for Zenoah

Genuine FG spare/option part.Contents:1 piece

€19.90*

7407/01 FG CFK mount

Genuine FG spare/option part. Content:1 piece

€23.90*

7387 FG Rebuilt kit Zenoah G230, set

Cylinder-piston repair kit for Zenoah engine G230. Set includes the following parts:Cylinder, piston, piston ring, cylinder foot gasket, centering disks, piston pin clip.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€69.90*

7407/02 FG Support for silencer, 2 pcs.

Genuine FG spare/option part.Replacement part for 7407 CFRP supporting brace f. Tun. pipe, set

€11.50*

7401 FG Steel manifold - 1pce.

Suitable for FG and all 1:5 models with horizontal Zenoah or Solo engine in combination with a tuning pipe.

€72.50*

Customers also viewed

y1392/03 Zenoah weather resistant insulated winter jacket

y1392_03 Size: L - Large

Genuine Zenoah spare/option part.Weather resistant green Zenoah winter jacket with zipper-removable lining.With Zenoah logo.Sizes:L - LargeXL - Extra LargeContents:1 piece

€49.90*

Details

y0315 Elcon Aluminum a-arms, rear lower, for FG Evo and Sportsline, truck width, pair

Rear lower a-arms for all FG Evo cars (except 2020 series) that will bring the car to Race Truck width. The arms can also be installed as an upgrade in Sportsline trucks up to and including the 13 series. The arms are compatible with all other FG parts like uprights, Evo shock mounts and Evo stabilizer bar.Due to the increased width you will also need longer driveshafts turnbuckles for the upper a-arms and shock shafts for installation in an existing Evo. When upgrading a Sportsline truck to the Evo parts you will need a complete Evo stabilizer bar and shock mounts, rose joints and conical spacers instead. Regular price: 129.90 EURSpecial offer: 89.90 EURContents:2 pieces

€89.90*

7385/02 FG Piston 26 cm³ for Zenoah

Genuine FG spare/option part.Dimensions:Diameter: 34 mmContents:1 piece

€30.90*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€42.90*