7303 Samba 7 Titan Racing tuned pipe system ESW DMC 50-1101

Samba

€399.00*

Prices incl. VAT plus shipping costs

Available

Product number: samba_7303

Product information "7303 Samba 7 Titan Racing tuned pipe system ESW DMC 50-1101"

The Samba 7 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 7 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks!
The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs
Despite of the increased performance fuel consumption remains the same compared to a Samba 6 pipe. The Samba 7 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range!
New

New connection from exhaust to manifold
Lower center of gravity through new alignment
Also suitable for 510 wheelbase

Samba 7 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).

Of course, the Samba 7 tuned pipe system is race legal for racing, with the DMC approval number 50-1101 engraved. The Samba 7 - tuned pipe system comes with an installation kit.

Fits:

All On-road cars from FG
Contrast
Bergonzoni
Harm
Genius
and many others as well<
Will fit medium (510 mm) wheelbase cars from FG as well

Original statement from Samba:

"This new tuned pipe system is the result of the development"

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

8300 Samba 8 Titan Racing - tuned pipe system DMC 10-1504

The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€399.00*

Accessories / Spare parts

55555 Samba carbon shield for the Samba 8 pipe

Genuine Samba spare/option part. We have developed this part to guard the pipe from side inpact and also for keeping the pipe hot for better perpormance.Best to use with the Samba Racing fixing kit set Nr. 7110.Contents:1 piece

€39.90*

This product is currently not available.

y7111 Samba 7 Connecting Spring

Genuine HT spare/option part.Connecting springs for Samba 7 pipes.Lenght: approx 18 mmWire thickness: 0,8 mmContents:8 pieces

€11.90*

7125 Samba 7+8 exhaust manifold for steel and titanium pipe, 1 pce.

Samba 7 exhaust manifold, for steel and titanium pipe, 1 pce.Genuine Samba manifold for series 7 and 8 tuned pipes, fits steel and titanium version.

€44.90*

7110 Samba Installation kit for 50 mm pipes

Genuine Samba spare/option part. Fits Samba F1 Titanium RS5, Samba F1 Titanium FG, Samba 6 Titan, Samba 7, No. FG #7406 FG Steel Side Power and many other tuned pipes with a diameter of 50 mm. Please check first whether the installed pipe mount has the right height in the car so that the alignment of the tuned pipe to engine is still appropriate.Contents:1 set

€29.90*

7111 Samba 7 Connecting set

Genuine Samba spare/option part.Connecting springs for Samba 7 pipes.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 1,5 mm

€12.90*

7112 Samba O-rings Set 50mm

Genuine Samba spare/option part. Replacement o-ring for Samba pipes.

€9.90*

7100/03 Samba sealing ring 70 x 3 mm

Genuine Samba spare/option part.Contents:2 piece

€3.90*

Kunden haben auch gesehen

8300 Samba 8 Titan Racing - tuned pipe system DMC 10-1504

The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€399.00*

7150 Samba 7 tuned pipe for 1/5 scale FG 4WD models

The 4WD Samba tuned pipe is especially designed for the 26cc Zenoah engine with a useable power band in mind. This results in a performance increase over the engines entire rpm range.

€230.00*

Body set Oskart - different color

set contains:- front part- front vertical part (steering wheel panel)- side part left- side part right

€139.00*

4832 Samba BIG BELLY Titan tuned pipe for Losi 5ive-T/2.0 up to 32 cm³

Genuine Samba spare/option part.The Samba 5ive T tuned pipe from the 1/5 world champion!At the 1/5 World Championship were place 1 to 10 (!) equipped with a samba tuned pipe system.A proof of competence without equal!BiG BELLY, special version for the 5ive-T / Monster Truck XL with engines up to 32 cm³ engine. Comes with complete hardware for installation.Top quality and optimized performance across the entire rpm range of your engine.The pictures of the installed pipe, they show you the steel version with the order no.: A proof of competence without equal!BiG BELLY, special version for the 5ive-T / Monster Truck XL with engines up to 32 cm³ engine. Comes with complete hardware for installation.Top quality and optimized performance across the entire rpm range of your engine.The pictures of the installed pipe, they show you the steel version with the order no.: 4822, are for presentation purpose only.Contents:1 set

€419.90*

8303 ESW wSamba 8 Titan Racing - tuned pipe system DMC 10-1504 for short wheelbase 510mm

The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! In the short version 8303 ESW, the installation of the tuned pipe is possible in vehicles with 510mm wheelbase. Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€399.00*

5705 Mielke Big Tornado tuned pipe

Genuine Mielke spare/option part. Even better uniform power over the whole speed range. Especially in the major driving areas from 10.000 rev / min. to full speed. With 560 grams ideal weight for balanced driveability. Center of mass as low as possible new construction. Only 0,8 mm of specially thin steel metal.Compared to its predecessor the tube's diameter increased for about 10 mm. which allows for the better performance. The new set also comes with teflon seal # 5702.Including manifold and mounting material.Suitable for: 1:5 on road 2WD FG Sportsline, Evo- and Competition cars Mecatech FW01 S88R Harm SX4, SX5 Genius Contents:1 piece

€249.00*

Cutsomers also bought

5445/2 Mielke Special Screw 11mm for Mecatech/Genius clutch 5440/5540

Genuine Mielke spare/option part. Contents:1 piece

€5.95*

5014/04 FG Servo adapter frame, Futaba/JR, Thunder Tiger DS1015

Genuine FG spare/option part. Suitable for rc-plate 5014.Dimensions:Inside length: 44 mmInside width: 20,5 mmContents:2 pieces

€11.90*

Mielke 5445 Power Gearshift clutch adjustement tool

Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.

€19.90*

6924/08 FG Pan-head screw with Torx M3x8 mm, 10 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€2.90*

5640 Mielke Power Gearshift II Converse System clutch for Mecatech / Genius / FBX / S88R, 2,4mm springs, Alu

Genuine Mielke spare/option part. Fits Mecatech / Genius / FBX / SR 88Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece

€129.50*

5445/1 Mielke tool for clamping of all Power-Gearshift clutches

Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece

€34.90*