Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

7125 Samba 7+8 exhaust manifold for steel and titanium pipe, 1 pce.

Product information "7125 Samba 7+8 exhaust manifold for steel and titanium pipe, 1 pce."

Samba 7 exhaust manifold, for steel and titanium pipe, 1 pce.

Genuine Samba manifold for series 7 and 8 tuned pipes, fits steel and titanium version.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

7111 Samba 7 Connecting set
Genuine Samba spare/option part.Connecting springs for Samba 7 pipes.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 1,5 mm

€12.90*

Average rating of 0 out of 5 stars

7333/02 FG Header gasket with heat shield for all Zenoah, CY, Fuelie and more
Genuine FG spare/option part.Fits Zenoah (G230, G240, G260, G270, G290, G320), Chung Yang (CY), Fuelie and HPI engines. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContenst:1 piece

€8.50*

Accessories / Spare parts

Average rating of 0 out of 5 stars

y0757 Special exhaust manifold screw set, 5 pcs.
Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding external tooth lock washers DIN 679A.The lock washers prevent loosening of the manifold screws.Bag with five each screws and lock washers.Part is delivered in silver or black color from vendor!

€3.90*

Average rating of 0 out of 5 stars

y0758 Special exhaust manifold screw set, 5 pcs.
Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

Average rating of 0 out of 5 stars

7110 Samba Installation kit for 50 mm pipes
Genuine Samba spare/option part. Fits Samba F1 Titanium RS5, Samba F1 Titanium FG, Samba 6 Titan, Samba 7, No. FG #7406 FG Steel Side Power and many other tuned pipes with a diameter of 50 mm. Please check first whether the installed pipe mount has the right height in the car so that the alignment of the tuned pipe to engine is still appropriate.Contents:1 set

€29.90*

Average rating of 0 out of 5 stars

7111 Samba 7 Connecting set
Genuine Samba spare/option part.Connecting springs for Samba 7 pipes.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 1,5 mm

€12.90*

Average rating of 0 out of 5 stars

7112 Samba O-rings Set 50mm
Genuine Samba spare/option part. Replacement o-ring for Samba pipes.

€9.90*

Customers also bought

Average rating of 0 out of 5 stars

7332 FG Silencer gasket for CY / Zenoah / Fuelie / PT
Genuine FG spare/option part.For all Zenoah / CY / Fuelie / PT engines.Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Similar products

Average rating of 0 out of 5 stars

7409/01 Samba 8 exhaust manifold for FG EVO 2020
Genuine Samba spare/option part. Contents:1 piece

€49.90*

Average rating of 0 out of 5 stars

7126 Samba 7+8 exhaust manifold for steel and titanium pipe, 1 pce.
Samba 7 exhaust manifold, for steel and titanium pipe, 1 pce.Genuine Samba manifold for series 7 and 8 tuned pipes, fits steel and titanium version.New socket system!

€44.90*

Average rating of 0 out of 5 stars

Exhaust manifold Samba 3 and Samba 5, 2106, 1 pce.

€44.90*

Average rating of 0 out of 5 stars

7155 Samba 7 exhaust manifold for FG 4WD
Genuine Samba spare/option part. Contents:1 piece

€44.90*

Average rating of 0 out of 5 stars

4127 Samba manifold for 4121/4131 Leopard pipe
Genuine Samba manifold for Samba 4121/4131 tuned pipes.

€49.90*

Customers also viewed

Average rating of 0 out of 5 stars

7126 Samba 7+8 exhaust manifold for steel and titanium pipe, 1 pce.
Samba 7 exhaust manifold, for steel and titanium pipe, 1 pce.Genuine Samba manifold for series 7 and 8 tuned pipes, fits steel and titanium version.New socket system!

€44.90*

Average rating of 0 out of 5 stars

FG Sportsline 2WD-530 with Ford Mustang body shell, 23cm³ Engine HT-Edition
The Sportsline quality at a reasonable price for beginners. For rookies and all those who simply just want to have fun and drive a DTM Audi, Mercedes or a fast Porsche. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.Technical description:The model has a 535 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Unfortunately, the pin striping lines on the body shell have not been applied very carefully and should be reworked individually, if you place value on it. The body shell is vac-formed from 2 mm Lexan. Due to the manufacturer, there is an additional mounting hole of approx.10 mm diameter on the hood. The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads!Dimensions: Length: 780 mm Width: 392 mm Height: approx. 240 mm Wheelbase: 530 mm The car comes with an unpainted body shell!HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EURTouring cars in action!Painting tips:

€1,299.90*

Average rating of 0 out of 5 stars

7117 Samba 7 Connecting set for Samba 7 and Samba 8 / new Version
Genuine Samba spare/option part.Connecting springs for Samba 7 and 8 pipes in the latest version.Dimensions:Length: approx 18 mmWire thickness: 0,8 mmContents:8x Connection springs2x Silicone damperring2x Viton O-Ring 20 x 2,5 mm

€12.90*
%

Average rating of 0 out of 5 stars

HW38020369 Hobbywing Ezrun MAX4 HV Combo 70125 560kV
Product information "Hobbywing Ezrun MAX4 HV Combo 70125 560kV"The Ezrun MAX4 ESC works best with the included 70125 SD 560kV motor for extra large 1/4 and 1/5 scale models. This fully sensor-controlled combo can be used in many ways in such models, whether it's a heavy-duty off-roader or a truck.So if you like large models and You want the most fun out of it, the MAX4 combo is high-quality equipment that literally bursts with exploding power. And even with its enormous size, care was taken to use high-quality and, above all, durable materials in the construction. After all, both the ESC and the motor should ensure that driving fun lasts as long as possible. Even the electronic switch is well protected against damage. In addition, the Ezrun MAX4 has a built-in super high-current BEC, which can provide a max. output power of up to 25A. The output voltage can be switched between 6V, 7.4V and 8.4V. The high-current BEC was developed in such a way that it can supply the current high-current servos with sufficient power if required, and thus be able to precisely control the appropriate large models.Features:Full sensored comboSuper powerful switch mode BEC with a constant current of 10A, instant 25A and the ability to switch between 6V, 7.4V and 8.4VFireproof circuitry to protect the battery connector, as well as many built-in protectionsVersatile programmableReal time data recordingCNC-milled aluminum housing, 0.2mm silicon steel sheets and other high-quality building materialsFour sintered NdFeB magnets for super torque, stable performance and explosive powerInnovative new sensor interfaceWaterproof and dustproof thanks to the rubber cover of the bearingsIndependent, high-precision encoder in the motor to communicate the rotor position without any interferenceMore power and less heat development with the same loadTechnical Specifications:ESCCurrent (cont./peak)300A / 2000AMotor Type:Sensor/Sensorless Brushless MotorsMotor Limit:12S LiPo: kV <= 600 (70125)Cells:6-12SBEC:6V / 7.4V / 8.4V @ 10A (adjustable)Fan:Yes (powered by BEC)Programming Input:Fan/ PRG-InputProgramming:LED Programm Card, LCD Programm Box, OTA Bluetooth Programm ModuleDimensions:125x85x61.7mmWeight:775.4gApplication:1/4 and 1/5 Heavy Duty-Off-Road, TrucksMotorSensor Type:SensoredPoles:4kV Rating:560kVCells:8-12SNo-Load Current:3.6AOuter Diameter:70mmLength:125mmShaft Diameter:8mmShaft Length:30mmWeight:1995gApplication:1/5 Heavy Duty Off-Road, TruckDelivery:1x EzRun MAX4 ESC1x EzRun 70125SD Motor with 560kV1x Manual

€542.40* €576.00* (5.83% saved)

Average rating of 0 out of 5 stars

8100 Samba 8 Racing - tuned pipe system DMC 10-1504 for 2WD
We have tested and optimized the Samba 8 tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Not fit on 4WD!Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit. The mounting pictures shows the Samba 8 in Titan version.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€229.90*

Average rating of 0 out of 5 stars

68534 FG Conversions kit Sportline Touringcar long to 4WD
For converting the Sportsline long touring car into a model with 4WD drive. The conversion kit contains all chassis parts and drive parts that are required for the conversion.

€189.50*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development