Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6433/21 FG Steel gearwheel 21 teeth

Product information "6433/21 FG Steel gearwheel 21 teeth"

Genuine FG spare/option part.

For an optimal gear adjustment, suitable with gearwheel 44 teeth.


Dimensions:
  • Diameter: 32,7 mm

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

- PMT BigScale Slick, Hard
PMT tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Genuine PMTspare/option part. PMT - large scale slick 2019Winner of all three 1/5 EFRA Grand Prix races this year, as well as in the ELS Cup Luxembourg:April 28th: 1st EFRA Grand Prix at Lostallo, CHMay 26th: 2nd EFRA Grand Prix at Leipzig, GermanyJune 23rd: 3rd EFRA Grand Prix at Groningen, NLAugust 11th ESL-Cup LuxembourghRecommended use according to the manufacturer PMT: H - Hard, as front tires on very grippy asphalt and at high temperatures M - Medium, as front tires on normal asphalt and at normal temperatures S - Soft, as rear tires on normal asphalt and at normal temperatures SS - Ultra Soft, as rear tires on less grippy asphalt and at lower temperatures Dimension: Outside diameter: approx. 116 mm Width: approx. 65 mm Rims: 18 mm square driveContents:2 piece

€38.90*

Average rating of 0 out of 5 stars

5014/07 FG Battery holder long
Genuine FG spare/option part. Suitable for all FG touring car und Race-Truck models with long wheel base.Dimensions:Total length: 255 mmMounting bolt distance: 220 - 240 mmContent:1 piece

€15.90*

Average rating of 0 out of 5 stars

4411/06 FG bearing set with grease filling EVo/Competition
Genuine FG spare/option part. FG ball bearing with heat resistant grease filling up to 180°. Therefore essentially improved durability of the wheel bearings and the clutch bell.For all FG cars with alloy differential case except 4WD and Formula 1.Contents:Eight pieces: 8 x 22 x 7 mmTwo pieces: 10 x 22 x 6 mmTwo pieces: 10 x 19 x 7 mmTwo pieces 15 x 28 x 7 mm

€39.50*
%

Average rating of 0 out of 5 stars

y2003 Tuning front suspension set for nearly all FG 4WD Sportsline cars
y2003 Model: y2003/03 - FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR
Tuning front suspension set for all FG 4WD Sportsline cars: Monstertruck; Baja; Marder; Beetle; touring cars:Not fit Formular 1, Leopard and Truggy!y2003/01 fits:FG 4WD Monster-Truck models, Beetle.Part number:Name:y68412Aluminum front lower a-armsy2000Alu Querlenker Front unteny68413Aluminum front uprightsy0563Aluminum shock tower Monster-Truck/Beetley1036Rose joint for alloy wishboney2003/02 fits: FG 4WD Baja Buggy.Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishboney0579Alloy roll cage brackety2003/03 fits:FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR. When installing in a Porsche GT3 RSR or Mini Cooper 4WD with 510 mm wheelbase, the steering travel limiter must be installed into the first threaded hole of the knuckle arm and not at the standard location on the knuckle as in off-road cars!Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishbone

€469.90* €599.90* (21.67% saved)

Average rating of 0 out of 5 stars

GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*

Similar products

Average rating of 0 out of 5 stars

6431 FG Steel pinion 16 teeth
Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

Average rating of 0 out of 5 stars

6427 FG Plastic gear wheel 46 teeth - 1pce.
46 teeth gear wheel for the layshaft.Diameter 72 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

Average rating of 0 out of 5 stars

6432 FG Steel pinion 18 teeth - 1pce.
Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.00*

Average rating of 0 out of 5 stars

6431/01 FG Steel pinion 16 teeth, wide - 1pce.
Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*

Average rating of 0 out of 5 stars

6425/01 FG Stabilizer front/rear for 1/6 scale models
Genuine FG spare/option part.Fits for all 1:6 scale models except Monster-Truck, Monster Beetle Pro and Stadium-Truck. Not suitable for all 4WD cars.Dimensions:Front: 3 mmRear: 4 mmContents:1 set

€37.00*

Average rating of 0 out of 5 stars

6429/01 FG Upright front for 1:6 2WD models
Genuine FG spare/option part.Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.Bearing seats: 22 x 7 mm.Contents:2 pieces

€39.90*

Average rating of 0 out of 5 stars

6451/03 FG Air filter adapter for Zenoah and CY, 1 pce.
Item N° 6451/03 Air filter adapter for Zenoah and CY, 1pce.These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.Fits: Zenoah G230/G240/G260/G270/G290 and CY 23/26 cm³ engines.

€17.50*

Average rating of 0 out of 5 stars

6438/05 FG Tire insert for slicks 80 mm 1/6
Genuine FG spare/option part.Fits for 1/6 scale slick tires. Dimensions:Length: 380 mmWidth: 73 mmHeight: 13 mmContents:2 pieces

€14.90*

Average rating of 0 out of 5 stars

6433 FG Steel pinion 20 teeth - 1pce.
Item N° 6433 Steel pinion 20 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.90*

Average rating of 0 out of 5 stars

6432/17 FG Steel gearwheel 17 teeth, profile displaced, 1 pce.
Item N° 6432/17 Steel gearwheel 17 teeth, profile displaced, 1 pce. True running steel pinion for minimized wear. Suitable for all FG cars except Formula 1. Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€33.90*

Average rating of 0 out of 5 stars

6456 FG Airfilter adapter with choke for Zenoah
Genuine FG spare/option part. As spare parts for engines that have no built-in choke.Fits Zenoah G230/G240/G270RC/G290/ZG22.Content:1 piece

€23.95*

Average rating of 0 out of 5 stars

6441 FG Filter oil for foam filter 50ml
Genuine FG spare/option part. For use with all foam filters, not for fabric filters.Content1 piece

Content: 50 Milliliter (€198.00* / 1000 Milliliter)

€9.90*

Customers also viewed

Average rating of 0 out of 5 stars

6433 FG Steel pinion 20 teeth - 1pce.
Item N° 6433 Steel pinion 20 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.90*

Average rating of 0 out of 5 stars

7457 FG Alloy hub B - 1pce.
Item N° 7457 Alloy hub B - 1pce.Suitable for gear wheels with 40, 42 or 44 teeth in connection with the 2-speed gears or .

€35.90*

Average rating of 0 out of 5 stars

6491 FG Steel spur gear 44T with adapter - set
Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5

€79.99*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Plugin Development