6433/23 FG Secondary gears 23 teeth

€35.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6433_23

EAN: 3410569716668

Product information "6433/23 FG Secondary gears 23 teeth"

Genuine FG spare/option part.

Clutch	Gear shaft outer	Gear shaft inner	Differential	Reduction ratio
34	58	23	73	5,41
34	58	23	74	5,49
34	58	24	73	5,19
34	58	24	74	5,26
35	58	23	73	5,26
35	58	23	74	5,33
35	58	24	73	5,04
35	58	24	74	5,11
36	58	23	73	5,11
36	58	23	74	5,18
36	58	24	73	4,90
36	58	24	74	4,97
37	58	23	73	4,98
37	58	23	74	5,04
37	58	24	73	4,77
37	58	24	74	4,84

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

6431 FG Steel pinion 16 teeth

Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

6427 FG Plastic gear wheel 46 teeth - 1pce.

46 teeth gear wheel for the layshaft.Diameter 72 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

6429/01 FG Upright front for 1:6 2WD models

Genuine FG spare/option part.Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.Bearing seats: 22 x 7 mm.Contents:2 pieces

€39.90*

6425/01 FG Stabilizer front/rear for 1/6 scale models

Genuine FG spare/option part.Fits for all 1:6 scale models except Monster-Truck, Monster Beetle Pro and Stadium-Truck. Not suitable for all 4WD cars.Dimensions:Front: 3 mmRear: 4 mmContents:1 set

€34.50*

6451/04 FG O-rings for air filter adapter 19x1,5 und 57x2,5mm - 2pcs.

These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.

€3.90*

6438/05 FG Tire insert for slicks 80 mm 1/6

Genuine FG spare/option part.Fits for 1/6 scale slick tires. Dimensions:Length: 380 mmWidth: 73 mmHeight: 13 mmContents:2 pieces

€14.90*

6441 FG Filter oil for foam filter 50ml

Genuine FG spare/option part. For use with all foam filters, not for fabric filters.Content1 piece

Content: 50 Milliliter (€190.00* / 1000 Milliliter)

€9.50*

6431/01 FG Steel pinion 16 teeth, wide - 1pce.

Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*

6445 FG Spring tension adjustment clips

Genuine FG spare/option part. Required for preload adjustment on FG off-road shocks.For shocks with 20 mm body diameter. Content:6 rings 5 mm wide2 rings 10 mm wide

€8.90*

6451/03 FG Air filter adapter for Zenoah and CY, 1 pce.

Item N° 6451/03 Air filter adapter for Zenoah and CY, 1pce.These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.Fits: Zenoah G230/G240/G260/G270/G290 and CY 23/26 cm³ engines.

€16.90*

6494/01 Gear 62 teeth EVO monoblock

€67.50*

6452/04 FG O-ring 19x1,5mm for air filter adapter - 2pcs.

Spare part for 6452/05

€2.60*

Customers also viewed

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft

Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*

Configure now