5851 Mielke Power Gearshift II Converse clutch for FG, Harm SX3, RS5, Losi, HPI Carbon with 2mm springs, long clutch carrier
€129.50
Available
Product information "5851 Mielke Power Gearshift II Converse clutch for FG, Harm SX3, RS5, Losi, HPI Carbon with 2mm springs, long clutch carrier"
Fits for FG, Losi, HPI.
For onroad vehicles, less Grip or rain use.
Backwards installedshoes make this clutch a "Converse" clutch!
After many successes with the "normal" Power Gearshift clutch this is the next step.
Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.
Contents:
- 1 piece
Login
Accessories / Spare parts
Genuine Mielke spare/option part.Clutch carrier for Mielke Power Gearshift II clutches part numbers 5641 and 5651.Content:1 piece
Genuine Mielke spare/option part.Front cover for Mielke Power Gearshift II clutches part numbers 5641 and 5651.Content:1 piece
Genuine Mielke spare/option part.Clutch shoes for Mielke Power Gearshift II clutches part numbers 5640, 5641 and 5642.Content:3 Pieces
Genuine Mielke spare/option part. Contents:3 pieces
Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift 2 clutches.Contents:3 pieces
Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.
Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece
Customers also bought
Genuine Mecatech spare/option part for the FW01.Contents:1 piece
Genuine Speed-Tec spare/option part. For Zenoah G230/G260AN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is e.g. possible to make up for irregularities in the sealed surfaces (e.g. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5 The SPEED TEC AN - expansion sealing gaskets are available in the following versions:# ST-AN26V carburetor gasket 0,25/0,50 mm# ST-AN25I insulator gasket 0,25/0,50 mm# ST-AN24L air filter gasket 0,25/0,50 mm# ST-AN22 cylinder gasket, two bolt 0,25/0,50 mm# ST-AN42 cylinder gasket, four bolt 0,25/0,50 mm# ST-AN23G crank case gasket 0,25/0,50 mmContents:1 piece
Genuine FG spare/option part. Only suitable with standard size ball bearings.Dimensions:Length: 10 mmOuter diameter: 11 mmInner diameter: 8 mmContents:2 pieces
Customers also viewed
Genuine Mielke spare/option part. Fits for FG, Losi, HPI.For onroad vehicles, less Grip or rain use.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece
Genuine Mielke spare/option part. Fits FG Evo / RS 5 Tourenwagen / Harm SX 3 / Losi 5ive / Losi DBXL / HPI Baja.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece
Genuine Mielke spare/option part. Fits FG Evo / RS 5 Tourenwagen / Harm SX 3 / Losi 5ive / Losi DBXL / HPI Baja.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece
Genuine Mielke spare/option part. Fits Harm SX 4 / FG 2020 / some F1 cars / Harm Formel FX 3.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece Not for FG Formula 1 sportsline models!
Genuine FG spare/option part.Handy auxiliary tool to press-in ball bearings, guide bushes a.s.o. A jaming of ball bearings or guide bushes is almost impossible. Also suitable for dismounting of cooling fans and clutches at Zenoah engines. For Solo only suitable for cooling fans.
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.Content:7315 Clutch block carrier7315/01 Screw for carrier7318 Dowel screw for clutch blocksy1419 Sinter clutchy1419/01 Clutch springs for Sinter clutch
Item N° y0656 Shocks for Bigscale cars 1/6 and 1/5, 173 mm long, 2 pcs.GD type extra high capacity shock for largescale cars. Shock comes complete with spring and is factory filled.Dimensions:Mounting hole distance (extended): 173 mmTotal length (extended): 190 mmTravel: 56 mmShock shaft diameter: 6 mmBody diameter: 30 mm