EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

5716 FG Clutch blocks for Chung Yang

€19.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_5716
EAN: 3410569708908

Product information "5716 FG Clutch blocks for Chung Yang"

Genuine FG spare/option part.



Chung Yang bolts 5718 are required for installation.

Contents:
  • 2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Accessories / Spare parts

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*
7318 FG Dowel screw set for clutch blocks Zenoah
7318 FG Dowel screw set for clutch blocks Zenoah
Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Content:2 pieces

€9.90*
%
y0730 GPM Big Scale-Cross adjustable 3 shoe clutch
y0730 GPM Big Scale-Cross adjustable 3 shoe clutch
Genuine GPM spare/option part. The Big Scale-Cross clutch is equipped with 1.3 mm springs, is especially suitable for Off-Road use.Adjustable 3-shoe clutch for:ZenoahChung YangHPI - FueliSmartech PTAnd many other enginesThe GPM-Big Scale clutch:Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. A 2.5 mm allen key wrench is required for this application.Therefore it is possible to precisely adjust the clutch engagement depending on track characteristics.Attention: You must use adhesive y0743 Clutch-Safe when replacing clutch pads!y0730y0731Content:1 piece

€99.90* €129.90* (23.09% saved)
y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch
y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch
With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*
7316/01 FG Tuning-clutch block for Zenoah
7316/01 FG Tuning-clutch block for Zenoah
Genuine FG spare/option part. Spare part for Zenoah ZG22, G230RC, G230RC 04 and G260RC.Zenoah bolts 7318 are required for installation.Contents:2 pieces

€37.90*

Alternatives

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*
5316 FG Clutch blocks for Chung Yang
5316 FG Clutch blocks for Chung Yang
Spare part for Chung Yang.Fits too Zenoah ZG22, G230/240/260/270/290/320.Zenoah bolts 5318 are required for installation.Content:Two clutch blocks

€23.00*
%
y0730 GPM Big Scale-Cross adjustable 3 shoe clutch
y0730 GPM Big Scale-Cross adjustable 3 shoe clutch
Genuine GPM spare/option part. The Big Scale-Cross clutch is equipped with 1.3 mm springs, is especially suitable for Off-Road use.Adjustable 3-shoe clutch for:ZenoahChung YangHPI - FueliSmartech PTAnd many other enginesThe GPM-Big Scale clutch:Suitable for racing and for the ambitious hobbyist driver. Unlike the stock clutch, the installed GPM-Big Scale clutch can be adjusted by turning one single screw. A 2.5 mm allen key wrench is required for this application.Therefore it is possible to precisely adjust the clutch engagement depending on track characteristics.Attention: You must use adhesive y0743 Clutch-Safe when replacing clutch pads!y0730y0731Content:1 piece

€99.90* €129.90* (23.09% saved)
y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch
y0733 Big Scale-EXTREME, adjustable 3 - shoe clutch
With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

€149.90*

Customers also bought

y2012-93/03LL Mecatech low-friction Bearing 10x19x5, set of 3
y2012-93/03LL Mecatech low-friction Bearing 10x19x5, set of 3
Genuine HT spare/option part for the FW01.Low-friction Clutch bearing ABEC-7, sealed on both sides.Content:3 pieces

€21.50*
y2012-93/03 Mecatech Bearing 10x19x5, set of 3
y2012-93/03 Mecatech Bearing 10x19x5, set of 3
Genuine HT spare/option part for the FW01.Clutch bearing, sealed on both sides.Content:3 pieces

€17.90*
y2012-58/04LL Mecatech low-friction Flanged Bearing for Antiroll-Bar front and rear 8/12/3,5, set of 4
y2012-58/04LL Mecatech low-friction Flanged Bearing for Antiroll-Bar front and rear 8/12/3,5, set of 4
Genuine HT spare/option part for the FW01.Low-friction Flanged bearing for antiroll-bar front and rear ABEC-7, sealed on both sides.Content:4 pieces

€21.90*
2020-16 Mecatech Clutch puller for Mecatech Clutch
2020-16 Mecatech Clutch puller for Mecatech Clutch
Genuine Mecatech spare/option part. Contents:1 piece

€15.90*
GPM 7080/02 Balls for ball driveshaft for FG and Mecatech, 5 mm, 6 pcs.
GPM 7080/02 Balls for ball driveshaft for FG and Mecatech, 5 mm, 6 pcs.
Replacement balls for ball driveshaft.

€4.50*
y2012-01LL Complete low-friction Ball bearing set for FW01
y2012-01LL Complete low-friction Ball bearing set for FW01
Complete low-friction ball bearing set ABEC-7 for the Mecatech FW01, sealed on both sides.Set includes:Order no.:Dimensions:Position:Unit:Price:2012-32LL8/19/6Wheel8 pieces43,80 EUR2012-93LL10/19/5Clutch3 pieces21,50 EUR2012-110LL12/21/5Layshaft2 pieces14,90 EUR2012-175LL15/24/5Differential2 pieces15,90 EUR2012-58LL8/12/3,5 (Flanged)Stabiliser4 pieces21,90 EURTotal:19 pieces118,-- EURSet price: 79,90 EUR

€79.90*

Similar products

6013 FG Body clips
6013 FG Body clips
Genuine FG spare/option part. Dimensions:Length: 33 mmWire diameter 1.5 mmContents:10 pieces

€4.95*
Configure now
6020 FG Collet 2,1 mm
6020 FG Collet 2,1 mm
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*
6012 FG Body mounts
6012 FG Body mounts
Genuine FG spare/option part. Only needed with old version of 6011, late version comes with integrated body mounts.Contents:4 pieces

€3.50*
5745 FG Coupling flange for Chung Yang 1:5 edited for all FG models
5745 FG Coupling flange for Chung Yang 1:5 edited for all FG models
Genuine FG spare/option part. With cutout for all FG models.Part is delivered in silver or black color from vendor!Contents:1 piece

€42.80*
6020/03 FG Collet 3 mm
6020/03 FG Collet 3 mm
Genuine spare/option part.Dimensions:Outer diameter: 8 mmWidth: 5 mmContents:5 pieces

€4.30*
5341 FG Engine housing A for Chung Yang
5341 FG Engine housing A for Chung Yang
Genuine FG spare/option part. Contents:1 piece

€36.60*
6011 FG Side guards left/right
6011 FG Side guards left/right
Genuine FG spare/option part. Side guards suitable for Marder, Off-Road Buggy 2WD and 4WD body.Contents:2 pieces

€22.95*
5717 FG Clutch spring for Chung Yang
5717 FG Clutch spring for Chung Yang
Genuine FG spare/option part.Contents:1 piece

€6.50*
6022/01 FG Flexible antenna with mount
6022/01 FG Flexible antenna with mount
Genuine FG spare/option part. FG antenna tube with mount.Tube measures:Inner diameter: 2,2 mmOutside diameter: 4 mmLength: 190 mmContents:1 piece

€7.50*
5436 FG Additional headlights
5436 FG Additional headlights
Genuine FG spare/option part.All-purpose additional headlights.Measures:Outer diameter: 25 mmDepth: 27 mmContents:2 pieces

€18.90*
6010/01 FG Alloy chassis for Marder/Off-Road Buggy/Beetle/Monster/Stadium 2WD not WB535
6010/01 FG Alloy chassis for Marder/Off-Road Buggy/Beetle/Monster/Stadium 2WD not WB535
fg_6010_01 Version: Alloy blank
Genuine FG spare/option part. Suitable for all 1:6 2WD FG Off-Road models with Zenoah/Chung-Yang engine or for the E-Models. Fits Off-Road Buggy, Marder, Beetle and all Monster and Stadium 2WD cars.Not suitable for FG Leopard and WB535 models.Contents:1 piece

€147.50*
5412 FG Rain- and dirt protection
5412 FG Rain- and dirt protection
Genuine FG spare/option part. Rc plate are not includet.Fits for:5014 RC-plate for 1:5/Truck/Leopardy0112 Universal radio plate OnroadDimensions:Widht: 210 mmHeight: 130 mmLength: 130 mmContents:1 piece

€42.50*

Customers also viewed

6429/01 FG Upright front for 1:6 2WD models
6429/01 FG Upright front for 1:6 2WD models
Genuine FG spare/option part.Reinforced version with steel inlay to prevent the M5 bolts from being pulled out.Bearing seats: 22 x 7 mm.Contents:2 pieces

€39.90*
y1419/03 Sintered steel clutch complete set for FG, HPI and other
y1419/03 Sintered steel clutch complete set for FG, HPI and other
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.Content:7315 Clutch block carrier7315/01 Screw for carrier7318 Dowel screw for clutch blocksy1419 Sinter clutchy1419/01 Clutch springs for Sinter clutch

€44.90*
7303/08 FG Seal ring for CY / Zenoah / Fuelie
7303/08 FG Seal ring for CY / Zenoah / Fuelie
Genuine FG spare/option part.Spare partvv for CY / Zenoah G230/260.One each 1x 12 x 28 x 7 mm and 12 x 22 x 7 mmContents:2 pieces

€17.50*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development