5018 FG Throttle linkage set Zenoah-Porsche

€7.90*

Available

Product number: fg_5018

EAN: 3410564503850

Product information "5018 FG Throttle linkage set Zenoah-Porsche"

Genuine FG spare/option part.

Suitable for touring cars with short wheel base and Zenoah/CY engines. With 2 mm thick and 290 mm in length

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

8018 FG Throttle rod set for Zenoah 1:5

For touring car. With 2 mm thick and 350 mm in the lenght.

€9.50*

Accessories / Spare parts

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage

Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€3.90*

6534/02 FG Throttle pivot post

Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€7.90*

5019/01 FG Pressure spring 0,4x5x30 mm

Genuine FG spare/option part. Suitable for all throttle rods.Contents:2 pieces

€4.70*

6020 FG Collet 2,1 mm

Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*

Customers also bought

7021 FG Plastic parts roll cage each

Genuine FG spare/option part. Suitable for the following roll cages:70227024/01For tubes with a 10 mm outer diameter and 1 mm wall thickness.

€17.90*

7301/80 FG Crank case dowel pin for all engines

Spare part for all engines like Zenoah, Chung Yang, Fuelie, HPI, Losi, PT, Speed-Tec and many more.Content of pack:Four pieces

€5.30*

Carburetor Walbro WT 990

7855 Carburetor type: Walbro WT990 Standard carburetor for Zenoah G290. Typ: Walbro WT990 Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.

€79.90*

Configure now

y0776 NGK Suppression spark plug cap CY / Zenoah G230/240/260/270/290

The use of NGK spark plug caps with noise suppression resistor offers an optimal suppression of RFI in all frequency ranges without negative effects on engine performance.NGK spark plug caps are equipped with a resistor element made of high quality ceramic material. This ensures a constant resistance value with only a slight deviation in overload conditions. Features: Material: phenolic resinType: 90 degreeColor: Black Resistance: 5 kilo ohms RFI suppression: Yes Waterproof: Yes Cable length: Without cable Connection: SAE terminal nut or integrated terminal Features: Compact type; only 31.5 mm high

€12.90*

y1501/01 Balancer adapter board 2S 6S

Genuine HT spare/option part.The adapter board is used for charging of 2S 6S batteries with TP/Hyperion/XH/EH connector on most current chargers with XH connector.Contents:1 piece

€7.90*

6540 FG Receiver box

Genuine FG spare/option part. Splash-proofed receiver box for all merchantable small receivers, suitable for all car models 1:12 - 1:5.Dimensions:Length: upper section 92 mm, bottom 69 mmHeight: 48 mmWidth: 38 mmContents:1 piece

€13.90*

Similar products

5152 FG Extend rear body mount for Porsche

Genuine FG spare/option part. For fastening on the rear shock mount.Contents:1 piece

€15.90*

Details

5060/01 FG Vehicle decals set Porsche GT2

Genuine FG spare/option part. Contains the stickers of the headlights, the rear lights and the radiator grill.Dimensions:310 x 120 mmContents:1 piece

€19.00*

5014/06 FG Battery holder short

Genuine FG spare/option part. Suitable for all FG touring cars with short or medium wheel base.Dimensions:Total length: 225 mmMounting bolt distance: 190 - 210 mmContents:1 piece

€14.90*

5014/05 FG Bolt for battery holder

Genuine FG spare/option part.Plastic bolt for battery holder.Contents:2 pieces

€5.90*

5014/04 FG Servo adapter frame, Futaba/JR, Thunder Tiger DS1015

Genuine FG spare/option part. Suitable for rc-plate 5014.Dimensions:Inside length: 44 mmInside width: 20,5 mmContents:2 pieces

€11.90*

5019/01 FG Pressure spring 0,4x5x30 mm

Genuine FG spare/option part. Suitable for all throttle rods.Contents:2 pieces

€4.70*

5020/01 FG Front bumper Porsche GT2/GT3

Genuine spare/option part.Suitable for FG Porsche GT2/GT3 body.Dimensions:Length: 340 mmWidth: 115 mmContents:1 piece

€34.95*

5014/07 FG Battery holder long

Genuine FG spare/option part. Suitable for all FG touring car und Race-Truck models with long wheel base.Dimensions:Total length: 255 mmMounting bolt distance: 220 - 240 mmContent:1 piece

€15.90*

5116/01 FG 3-unit tunned pipe for Porsche short swb 465 mm

Genuine FG spare/option part.Stock tuning pipe for all 1/5 scale cars and Trucks models with engine in horizontal position. Now in noise-limited three-chamber version.Contents:1 piece

€124.50*

5015 FG Body mount

Genuine FG spare/option part. Suitable for VW New Beetle and Leopard front and side body.Contents:2 pieces

€11.90*

5070 FG Team decal set Chrysler Viper

€29.00*

5053 FG Team decals VW New Beetle

fg_5053 Elasto film: Original film

Genuine FG spare/option part. Contains the advertising labels for original design.The decal set contains no headlights, rear lights etc.Please order separately.Dimensions:350 x 340 mmContents:1 piece This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.

€20.80*

Customers also viewed

AT-DBXL002 ATOP aluminum camber rods/steering rods for Losi DBXL/DBXL-E

Genuine ATOP spare/option part. Camber rods for Losi DBXL with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Fits front and rear.Attention: On a DBXL-E 2.0 these rods can only be used as camber rods, not as steering rods! Dimensions: Hole to hole: 117mm Total length: 135mm Contents:2 pieces

€34.90*

y0695 HT Tool bag

Tools and decorative items are for presentation purpose only and not included. Genuine HT spare/option part. Tool bag, extremely rugged tool bag made from reinforced fabric, sewn edge. With 41 flexible attachment loops for various tools with all-round zipper and reinforced handle.Dimensions:Width: 510 mm Height: 275 mmContents:1 piece

€19.90*

Painted Porsche 962C body 1:5 for 530/535 mm wheelbase with rear spoiler, drilled

Suitable for 2WD models with a 535 wheelbase, such as FG, Carson and almost all other 1:5 touring cars. The body was deep-drawn from 2 mm thick Lexan. See photos for condition and drillings. Due to the low height of the body, the flatter airbox from FG with order number 9043 is required. Completely painted body for the 1:5 wheelbase 530/535 mm. With rear spoiler, wing mirrors and decal set. Body supports required: Front part: FG 7020/14 Front bumper Rear carrier: FG 7155 Rear body support Front side: FG 3014 Body support Rear side: FG 3014 Body mount Contents 1 piece

€249.00*

69246 FG Throttle rods 1:5 4WD, 535, Set

Item-No.: 69246Throttle rods 1:5 4WD, 535, Set

€13.90*

32745 Throttle linkage complete

Genuine Smartech spare/option part.lenght: 32cmwire strength: 2mmContent:1 set

€9.90*

6285 FG Throttle linkage complete for Leopard - set

For Leopard and Leopard race cars.Wire diameter 2 mmLength 345 mm

€10.70*

8018 FG Throttle rod set for Zenoah 1:5

For touring car. With 2 mm thick and 350 mm in the lenght.

€9.50*