Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

8018 FG Throttle rod set for Zenoah 1:5

Product information "8018 FG Throttle rod set for Zenoah 1:5"

For touring car. With 2 mm thick and 350 mm in the lenght.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage
Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€3.90*

Average rating of 0 out of 5 stars

6534/02 FG Throttle pivot post
Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€7.90*

Average rating of 0 out of 5 stars

5019/01 FG Pressure spring 0,4x5x30 mm
Genuine FG spare/option part. Suitable for all throttle rods.Contents:2 pieces

€4.70*

Average rating of 0 out of 5 stars

6020 FG Collet 2,1 mm
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*

Customers also bought

Average rating of 0 out of 5 stars

6534/02 FG Throttle pivot post
Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€7.90*

Average rating of 0 out of 5 stars

6540 FG Receiver box
Genuine FG spare/option part. Splash-proofed receiver box for all merchantable small receivers, suitable for all car models 1:12 - 1:5.Dimensions:Length: upper section 92 mm, bottom 69 mmHeight: 48 mmWidth: 38 mmContents:1 piece

€13.90*

Average rating of 0 out of 5 stars

8017 FG Brake rod set for 1:5
For touring cars and Leopard. With 2 mm thick and 440 mm in the lenght

€9.90*

Average rating of 0 out of 5 stars

y1107 Steel balljoints 5mm/M8, with conical spacers
Genuine HT spare/option part. Two balljoints 5mm/M8 with four conical spacers, to replace FG #6029/1 + balls (Set content like FG 4429/1).Fits almost for all 1/5 and 1/6 scale cars.The maintenance-free rod ends with the sliding contact surface combination steel/ bronze composite feature a spherical plain bearing with a brass outer ring which is lined with a layer of bronze web in to which PTFE with molybdenum disulphide has been rolled. Contents:2 pieces

€14.90*

Average rating of 0 out of 5 stars

7301/80 FG Crank case dowel pin for all engines
Spare part for all engines like Zenoah, Chung Yang, Fuelie, HPI, Losi, PT, Speed-Tec and many more.Content of pack:Four pieces

€5.30*

Average rating of 0 out of 5 stars

2012/504 Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution
Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution.Suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!Content:1 x y0700 Double sided alloy servo horn1 x y0700/01 Single-sided alloy servo horn2 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/510 (one spacer drilled to 3 mm inner diameter)1 x M3 x 30 mm Screw2 x M3 x 12 mm Nut

€27.90*

Similar products

Average rating of 0 out of 5 stars

6534/02 FG Throttle pivot post
Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€7.90*

Average rating of 0 out of 5 stars

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution
2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution.Content:1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages 1 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/5101 x Screw M3 x 18 mm2 x Nut M3

€17.90*

Average rating of 0 out of 5 stars

2012/504 Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution
Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution.Suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!Content:1 x y0700 Double sided alloy servo horn1 x y0700/01 Single-sided alloy servo horn2 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/510 (one spacer drilled to 3 mm inner diameter)1 x M3 x 30 mm Screw2 x M3 x 12 mm Nut

€27.90*

Average rating of 0 out of 5 stars

y0529/01RL Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball
Steel ball joint 4 mm thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One each with r/h and l/h thread

€10.80*

Average rating of 0 out of 5 stars

2012/501 Throttle linkage dedicated to Mecatech FW01 and FG Evolution
Throttle linkage dedicated to Mecatech FW01 and FG Evolution.Set includes:1 x 1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages1 x Screw M3 x 20 mm2 x Nut M3

€16.90*

Average rating of 0 out of 5 stars

2012/503 Steering servo linkage set dedicated to Mecatech FW01
Steering servo linkage set dedicated to Mecatech FW01Content:1213/11 Steering linkage l./r., M4 x 42 mm1 x 66244, Ball joint 7mm M4, 2 pcs.1 x 1213/10 Steel ball 7 x 6,5 mm, 2 St.2 x Screw M3 x 16 mm2 x Nut M3

€24.90*

Average rating of 0 out of 5 stars

1018/01 FG Tuning Throttle linkage
Genuine FG spare/option part. Tuning rods with flexible ball head for the screw on the engine.Fits on all FG models with lying engine.Contents:1 piece

€8.90*

Average rating of 0 out of 5 stars

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage
Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€3.90*

Average rating of 0 out of 5 stars

10020/01 FG Connection rods-set for F1
Suitable for Formula 1.

€3.70*

Average rating of 0 out of 5 stars

8017 FG Brake rod set for 1:5
For touring cars and Leopard. With 2 mm thick and 440 mm in the lenght

€9.90*

Average rating of 0 out of 5 stars

2012/500 Linkage set dedicated to Mecatech FW01, complete
Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Average rating of 0 out of 5 stars

y1309 All steel linkage for steering servo/servo saver application
Genuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€27.90*

Customers also viewed

Average rating of 0 out of 5 stars

5018 FG Throttle linkage set Zenoah-Porsche
Genuine FG spare/option part. Suitable for touring cars with short wheel base and Zenoah/CY engines. With 2 mm thick and 290 mm in lengthContents:1 piece

€7.90*

Average rating of 0 out of 5 stars

5019/01 FG Pressure spring 0,4x5x30 mm
Genuine FG spare/option part. Suitable for all throttle rods.Contents:2 pieces

€4.70*

Average rating of 0 out of 5 stars

7117 FG Tuned pipe bracket - 1pce.
Is need for mounting all FG tuning pipes.Wire diameter 2 mm

€7.50*

Average rating of 0 out of 5 stars

B59003/29 Fuelie 29cc 4bolt engine
Comes with clutch housing and clutch included.Contents:1 piece

€249.00*

Average rating of 0 out of 5 stars

10014 FG Body mounts front - 2pcs.
Suitable for the Formula 1.

€3.90*

Average rating of 0 out of 5 stars

7020/08 FG Front bumper for C-Class 04
Genuine FG spare/option part. Suitable for C-Class 04.Dimensions:Length: 110 mmWidth: 380 mmContents:1 piece

€29.90*

Average rating of 0 out of 5 stars

10019/01 FG Throttle rods-set for F1 with Zenoah

€7.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency