EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.

Skip image gallery

€11.10*

Prices incl. VAT plus shipping costs

gewinde_0005 Length
Product number: gewinde_0005.1
EAN: 4058575010302

Product information "Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs."

Electrogalvanized M8 steel turnbuckles right/left available in different lengths.

Order no.Length:
6100/03M8 left/right36 mm
6100/04M8 left/right40 mm
7076/01M8 left/right54 mm
6076/01M8 left/right61 mm
y0988M8 left/right75 mm


The 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Alternatives

Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.
Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.
Electrogalvanized M8/M10 steel turnbuckles right/left available in different lengths.Order no.Length:66267M8 right / M10 left66 mm66226M8 right / M10 left84 mm67267M8 right / M10 left108 mm

Variants from €21.05*
€19.90*
Details
Burnished M8 steel turnbuckles - 66 / 84 mm
Burnished M8 steel turnbuckles - 66 / 84 mm
Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*
Details

Customers also bought

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€47.90*
7323/14 FG Starter pawl for all CY / Zenoah
7323/14 FG Starter pawl for all CY / Zenoah
Genuine FG spare/option part.Contents:1 piece

€10.90*

Similar products

1213/11 FG Steering linkage l./r., M4 x 42 mm
1213/11 FG Steering linkage l./r., M4 x 42 mm
Genuine FG spare/option part. Contents:2 pieces

€19.95*
66287/02 FG Headless pin M5x45mm - 2pcs.
66287/02 FG Headless pin M5x45mm - 2pcs.
Headless steel pin M5x45mm

€3.90*
6774 FG Control threaded rods 155 mm
6774 FG Control threaded rods 155 mm
Genuine FG spare/option part. Contents:2 pieces

€19.70*
Details
ARA340156 ARRMA Steel Turnbuckle M6x130mm for Kraton / Outcast 8S
ARA340156 ARRMA Steel Turnbuckle M6x130mm for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:2 pieces

€14.99*
Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.
Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.
gewinde_0005 Length: y0988 75 mm+ 3EUR
Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*
€12.90*
1213/13 FG Steering turnbuckle shaft M4x84 mm Evo 2020
1213/13 FG Steering turnbuckle shaft M4x84 mm Evo 2020
Genuine FG spare/option part. Content:2 piece

€35.90*
y1471 Turnbuckle wrench 6 mm
y1471 Turnbuckle wrench 6 mm
Genuine HT spare/option part. Handy wrench for 6 mm turnbuckles.Maße: Wrench size: 6 mmLength: 75 mmContent:1 piece

€9.90*
67241 FG Steering rod r./l. Leopard 4WD, M4 x 56mm, 2pcs
67241 FG Steering rod r./l. Leopard 4WD, M4 x 56mm, 2pcs
Item N° 67241 Steering rod r./l. Leopard 4WD, M4 x 56mm, 2pcsSpare part for the Leopard 4WD 2010 version

€23.00*
67242 FG Steering rod r./l., M4 x 85mm for Leopard 2WD, 2pcs.
67242 FG Steering rod r./l., M4 x 85mm for Leopard 2WD, 2pcs.
Item N° 67242Steering rod r./l., M4 x 85mm for Leopard 2WD, 2pcs.Spare part for the Leopard 2010 2WD version

€23.00*
M6 aluminum turnbuckles, 2 pcs.
M6 aluminum turnbuckles, 2 pcs.
gewinde_0002 Length: 7028/01 - 65 mm+ 0.4EUR
M6 aluminum turnbuckles for linkagesTurnbuckle 6028/01Aluminum, 74 mm. For all 1/6 Off-Road cars.Turnbuckle 7028/01Aluminum, 65 mm. For all 1:5er touring cars.

€9.30*
Burnished M8 steel turnbuckles - 66 / 84 mm
Burnished M8 steel turnbuckles - 66 / 84 mm
gewinde_0005_02 Length: 66267B - 66 mm
Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*
Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.
Electrogalvanized M8/M10 steel turnbuckles - all lengths, 2 pcs.
gewinde_0005_01 Length: 108 mm, 67267+ 5.4EUR
Electrogalvanized M8/M10 steel turnbuckles right/left available in different lengths.Order no.Length:66267M8 right / M10 left66 mm66226M8 right / M10 left84 mm67267M8 right / M10 left108 mm

Variants from €21.05*
€25.30*

Customers also viewed

6100/03 FG Turnbuckle left/right M8/36 mm
6100/03 FG Turnbuckle left/right M8/36 mm
Genuine FG spare/option part. Steel version for all FG except Formula 1. Please note: FG has changed the overall length from 32 mm to 36 mm, the part number remained the same!In case you really need a 32 mm turnbuckle you can find them here.Contents:2 pieces

€12.50*
Tamiya spray paint PS-10 purple
Tamiya spray paint PS-10 purple
TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€97.90* / 1000 Milliliter)

€9.79*
Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.
Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.
gewinde_0005 Length: 6100/03 36 mm
Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

€9.90*
Burnished M8 steel turnbuckles - 66 / 84 mm
Burnished M8 steel turnbuckles - 66 / 84 mm
gewinde_0005_02 Length: 66267B - 66 mm
Genuine FG spare/option part.Burnished M8/M10 steel turnbuckles.Contents:2 pieces

€17.90*
LOS05020V2/BEAST Losi DBXL-E 2.0 4WD 12S Brushless RTR
LOS05020V2/BEAST Losi DBXL-E 2.0 4WD 12S Brushless RTR
Unfortunately the Fox body is no longer available! Beast Edition: Standard equipment: Beast Edition: Motor: 780kV 650/620kV Regler: 160 A 250/300A S-Power:   8S     12S The Losi DBXL-E 2.0 is fitted with a Spektrum 780KV motor and a 160A Spektrum ESC as standard.With our 12S Beast Edition you can choose between 2 variants:1.  Hobbywing Ezrun Max5 HV ESC 250A up to 12S LiPo BEC8 and Ezrun 650KV 4pol brushless motor, without surcharge.2.  Hobbywing Ezrun Max4 HV ESC Sensorless 300A up to 12S LiPo, BEC 10A and Top Tuning Beast Brushless Motor 620KV 4pol, 190,00 € extra charge.                 The original DBXL-E set the world on fire as the go-to vehicle for large scale bashers and enthusiasts alike. Its agile handling, out of the box speeds and durability make it a fan favorite. Now the Losi® DBXL-E 2.0 continues to build on the legendary status! Known worldwide for their dominance in the gas 1/5 market, especially with the 5IVE-T 2.0, Losi has built the DBXL-E 2.0 to be cleaner and easier to use, but with performance and speed that outruns the competition. At home in any environment from dirt to pavement, wet or dry, especially with its 4WD drivetrain with larger 5mm drive pins, the desert buggy makes sure all the power is put to the ground. Drivers stay in control with a DX3 transmitter, a Spektrum SR6100AT 6 Channel AVC® Telemetry Surface Receiver, and scale-to-size Maxxis Creepy Crawler LT tires. This desert buggy features all the technological advances drivers. Finally, the DBXL-E 2.0 has a Losi race-inspired motorsports themed livery for that true off-road look. You get all this and more from the brand that represents the pinnacle of performance.The Full-Throttle Freedom of AVC® TechnologyThe receiver's built-in AVC® (Active Vehicle Control®) traction control system works behind the scenes, making hundreds of throttle and steering adjustments per second, so more of the motor's power is translated into ballistic speed and acceleration instead of just flying dirt. The patent-pending AVC system adds a level of performance that simply cannot be found with any vehicle from any manufacturer other than Horizon Hobby. Like traction control in your full-scale vehicle, you can activate or deactivate the system on the fly and adjust the level of stability based on driving conditions. Any RC vehicle can go fast and with AVC you can go faster while maintaining optimum stability in all driving conditionFeatures Without surcharge : Ezrun MAX5 HV G2 ESC 12S and Ezrun 650KV brushless engine. Surcharge 190€ : Ezrun MAX4 HV G2 ESC and Top Tuning BEAST 620KV Brushless engine. Spektrum DX3 radio system with AVC® and new SR6100AT Receiver Spektrum S906 1/5th scale metal gear servo Water protected components Aluminum Shock Towers Aluminum Center Diff Cup New Radio Tray designed for use with single or dual steering servos. New Heavy Duty Drivetrain with 5mm drive pins New Electric Chassis specific chassis braces for increased durability and strength Spedial motor adapter plate Modified ESC mounting bracket Beast decal sheet New ESC Mount Pinned Center Outdrive Cups New Gearboxes for improved drivetrain strength and stability New Steering Rack with helical servo saver design Updated Front and Rear Bulkheads Maxxis Creepy Crawler LT Tires Losi and Fox Shox race-inspired Motorsports themed livery Laser Etched FOX Logo Shock Caps Roof-mounted LED bar Dimensions Height: 317 mm Length: 844 mm Width: 495 mm Weight: 9,8 kg

€1,749.00*
Configure now
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development