y1427 HT steel spur gear on-road with 39, 40, 41 teeth

rc-car-online

€49.90*

Prices incl. VAT plus shipping costs

Available

y1427 Version

Product number: y1427.2

Product information "y1427 HT steel spur gear on-road with 39, 40, 41 teeth"

Fits FG and Smartech touring cars in combination with HT aluminum layshaft spur gear carrier on-road y1428.

The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem.

The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears!

The spur gears are available as 39T, 40T or 41T versions

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft

Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*

Kunden haben auch gesehen

y1427 HT steel spur gear on-road with 39, 40, 41 teeth

Fits FG and Smartech touring cars in combination with HT aluminum layshaft spur gear carrier on-road y1428. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions

€49.90*

Tamiya Lexan spray paint

TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:

Content: 100 Milliliter (€97.90* / 1000 Milliliter)

Variants from €9.01*

€9.79*

LOS255024 Losi Flat Nut M4

Genuine Losi spare/option part. Contents:10 pieces

€5.99*

FG Monster Buggy Off-Road WB535 4WD Electric

No matter where you will set this model into action - you will always be right in front with the FG Monster Pro The E stands for electric power, the 4 means fourwheel drive. Extremely fast, terrific torque and all this without any engine noise. The Monster Pro is equipped with a Brushless and a ESC. The model will be delivered with a clear body shell.You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Empfänger: Mini BECy1570 CYS S0650 Largescale servo, 40 kg/0,11 secTx-batterys 4 pieces y0660/04 Equipment: y1567 ZTW Beast Pro 200A ESC TT56112/700 Top Tuning Monster Brushless Motor 700 kV Suspension compression at the rear of the FG Monster Pr should be reduced to prevent the rear fenders from coming in touch with the tires. As an alternative you may cut the fenders instead.The control can be regulated simply via transmitter or optionally via a program card. For the final assembling you need LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length of 150mm and a width of 50mm. The model is delivered with the EC8 connector system.

€1,249.90*

Configure now

8517/03 FG Wishbone pin 6x110mm - 2pcs.

Spare part for .

€6.60*

A024 Carson Front Hex Hub for Wild GP Attack

Genuine Carson spare/option part. Contents:2 pieces

€22.90*

y1427 HT steel spur gear on-road with 39, 40, 41 teeth

Login

Alternatives

Kunden haben auch gesehen

y1427 HT steel spur gear on-road with 39, 40, 41 teeth