EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

y1428 HT aluminum layshaft spur gear carrier “on-road”

€44.90*

Prices incl. VAT plus shipping costs

Available

Product number: y1428.1
EAN: 4058575062998

Product information "y1428 HT aluminum layshaft spur gear carrier “on-road”"

Fits FG and Smartech touring cars in combination with HT steel spur gear on-road y1427.

The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem.
The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car.

The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.

The carrier is available in two versions:
  • y1426/01 Suitable for FG and Smartech touring cars (not for EVO 2020)
  • y1426/02 for FG touring cars EVO 2020

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Alternatives

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*
Configure now

Similar products

6730/05 FG Allen Grub screw M5x5 mm, 15 Stück
6730/05 FG Allen Grub screw M5x5 mm, 15 Stück
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.40*
y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*
Configure now
6730/52 FG Grub screw with safety device M5x5mm Torx, 10 pieces
6730/52 FG Grub screw with safety device M5x5mm Torx, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€3.20*
6745 FG Shim ring 10x16x1mm - 10pcs.
6745 FG Shim ring 10x16x1mm - 10pcs.
Shim rings to compensate the axial play of the shaft, to use as washers a.s.o.Part is delivered in silver or black color from vendor!

€5.30*
7439 FG Alloy gear carrier 52mm - 1pce.
7439 FG Alloy gear carrier 52mm - 1pce.
Item N° 7439 Alloy gear carrier 52mm - 1pce.For 44T - 39T spur gears.For 10 mm diameter shafts.

€41.90*
7439/05 FG Alloy gear carrier 52mm special, 1 pce.
7439/05 FG Alloy gear carrier 52mm special, 1 pce.
Item N° 7439/05 Alloy gear carrier 52mm special, 1 pce.Precision alloy gear carrier, exact support of the plastic gearwheels 39, 40, 41, 42 and 44 teeth. Very low height design. For 10 mm diameter shafts.Please note: competition layshaft 6041/05 is necessary for installation!

€39.50*
6423 FG Gear protector for 42/44/46/48 T spur gears
6423 FG Gear protector for 42/44/46/48 T spur gears
Genuine FG spare/option part. Gearwheel protection in transparent polycarbonate for all 1:6 Off-Road, Monster-Beetle, Big-Foot and Truck models with the gearwheels 43, 44, 46, 48 teeth. Protects the driving gearwheels almost from dirt, sand and stones. We recommend the mounting when driving on car parks and Off-Road ground. Not suitable for Formel 1, Leopard 2 + 4 Competition, Competition and Competition Evolution models.Contents:1 piece

€39.90*
6495 FG Fine pitch gears EVO 2020
6495 FG Fine pitch gears EVO 2020
Genuine FG spare/option part. ClutchGear shaft outerGear shaft innerDifferentialReduction ratio345823735,41345823745,49345824735,19345824745,26355823735,26355823745,33355824735,04355824745,11365823735,11365823745,18365824734,90365824744,97375823734,98375823745,04375824734,77375824744,84Contents:1 set

€279.95*
7438 FG Alloy gear carrier 47mm - 1 pce.
7438 FG Alloy gear carrier 47mm - 1 pce.
Suitable for .For 10 mm diameter shafts.

€39.90*
6439 FG Alloy spur gear carrier 60 mm
6439 FG Alloy spur gear carrier 60 mm
Genuine FG spare/option part. For 48T - 46T spur gears.Contents:1 piece

€39.50*
6776 FG Alloy Ring Gear Adaptor male
6776 FG Alloy Ring Gear Adaptor male
Genuine FG spare/option part. Contents:1 piece

€65.90*
67345/02 FG Gear wheel protect for 67345
67345/02 FG Gear wheel protect for 67345
Genuine FG spare/option part.Replacement part for FG order number: 67345

€28.00*

Customers also viewed

y1427 HT steel spur gear “on-road” with 39, 40, 41 teeth
y1427 HT steel spur gear “on-road” with 39, 40, 41 teeth
y1427 Version: y1427/40 HT steel spur gear
Fits FG and Smartech touring cars in combination with HT aluminum layshaft spur gear carrier on-road y1428. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions

€49.90*
y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft
y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft
This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.

€89.90*
y1428 HT aluminum layshaft spur gear carrier “on-road”
y1428 HT aluminum layshaft spur gear carrier “on-road”
y1428 Version: y1428/01 Suitable for FG and Smartech touring cars
Fits FG and Smartech touring cars in combination with HT steel spur gear on-road y1427. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The carrier is available in two versions:y1426/01 Suitable for FG and Smartech touring cars (not for EVO 2020)y1426/02 for FG touring cars EVO 2020

€44.90*
y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft
Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*
Configure now
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency