Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y1034 HT Aluminum front suspension for FG Off-Road Buggy 2WD, set

Product information "y1034 HT Aluminum front suspension for FG Off-Road Buggy 2WD, set"

The sets include complete front bulkheads A + B with brace, upper (adjustable) and lower a-arms and shock tower.
Please note: the hinge pins are not included, you will use the pins from the stock suspension!

The sets include:
Item N°Name:
y1027HT Aluminum a-arm 2WD, front upper
y1026HT Aluminum a-arm 2WD, front lower, one-piece
y1028HT Aluminum front bulkhead A for 2WD
y1030HT Aluminum front bulkhead B for 2WD
y1036HT rose joints with conical spacers
y1029HT aluminum droop stops
y1035HT Aluminum shock tower Off-Road Buggy 2WD
y1031HT Aluminum bulkhead brace for 2WD
Unit prices: 387,10 EUR


Fits FG Off-Road Buggy 2WD.

This front suspension can be used on a FG Monster Beetl 2WD as well, however some new holes must be drilled into the shock tower for this application.

018ddb1bd69f719cbc4e968aecdeeb45.jpg

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y0518 Hobbythek service bag
Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.

€7.90*

Average rating of 0 out of 5 stars

y0932 HT Alloy front uprights for FG / Smartech
Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*

Average rating of 0 out of 5 stars

y1027 HT Aluminum a-arm 2WD, front upper
Genuine HT spare/option part.Alloy a-arm with provision for camber adjustment. Replaceable and adjustable ball joint included.Fits FG 2WD Marder, Beetle, Pajero, Off-Road Buggy and Monster 2WD Beetle; Carson / Smartech Attack, Super-Attack und Gas-Blaster!Contents:1 piece

€44.90*

Average rating of 0 out of 5 stars

y1026 HT Aluminum a-arm 2WD, front lower, one-piece
Genuine HT spare/option part.Very strong one-piece a-arm for use with rose joints. Features Igus bushings for the hinge pins (stock hinge pins can be re-used).Rose joints not included!Fits FG Marder, Beetle, Pajero, Off-Road Buggy 2WD and Monster Beetle: Carson / Smartech Attack, Super-Attack und Gas-Blaster! Please note:There are no different a-arms for l/h or r/h applications, therefore the rose joint enters the arm from the top or the bottom depending on the application. Contents:1 piece

€54.90*

Average rating of 0 out of 5 stars

y1029 HT aluminum droop stops
Genuine HT spare/option part.Required for bulkhead A (y1028).Contents:2 pieces

€32.90*

Average rating of 0 out of 5 stars

y1035 HT Aluminum shock tower Off-Road Buggy 2WD
Genuine HT spare/option part.Fits Off-Road Buggy 2WD only.Contents:1 piece

€49.90*

Average rating of 0 out of 5 stars

y1031 HT Aluminum bulkhead brace for 2WD
Genuine HT spare/option part.Reinforces the front suspension and doubles the mounting plate for the shock tower.Contents:1 piece

€32.90*

Average rating of 0 out of 5 stars

y1028 HT Aluminum front bulkhead A for 2WD
Genuine HT spare/option part.With provision to mount a stabilizer bar. Comes with two pairs of special bushings to adjust camber changes during the suspension movement.For a complete bulkhead you need droop stops y1029 (not included)!Fits 1/6 cars like Marder, Monster Models, Pajero, Beetle and many more. Contents:1 piece

€29.90*

Average rating of 0 out of 5 stars

y1030 HT Aluminum front bulkhead B for 2WD
Genuine HT spare/option part. Comes with two pairs of special bushings to adjust camber changes during the suspension movement.Fits 1/6 cars like Marder, Monster Models, Pajero, Beetle and many more.Contents:1 piece

€28.90*

Average rating of 0 out of 5 stars

y1036 HT rose joints with conical spacers
Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

Average rating of 0 out of 5 stars

y1078 HT Aluminum shock tower set Off-Road Buggy
Genuine HT spare/option part.Set includes Aluminum shock tower Off-Road Buggy 2WD y1035, fits FG Off-Road Buggy 2WD only and bulkhead brace y1031.Contents:1 set

€79.90*

Average rating of 0 out of 5 stars

y1079 HT Aluminum front bulkhead A + B + droop stops for 2WD
Genuine HT spare/option part. Bulkhead A with provision to mount a stabilizer bar. Bulkheads come with two pairs each of special bushings to adjust camber changes during the suspension movement.Fits 1/6 cars like Marder, Pajero, Beetle and all cars that have FG #6097 installed on the front suspension-Content:y1028 HT Aluminum front bulkhead A for 2WDy1029 HT aluminum droop stopsy1030 HT Aluminum front bulkhead B for 2WD

€79.90*

Similar products

Average rating of 0 out of 5 stars

y1036 HT rose joints with conical spacers
Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

Average rating of 0 out of 5 stars

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

Average rating of 0 out of 5 stars

y0321 Off-Road tuning springs Dirt-Spring M
federn_dirt_m Version: y0323/06 - M16, black
Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. The rear springs will also fit Hurrax shocks. All springs have an internal diameter because of the manufacturing progress: 21 up to 21,5 mm. Available in several versions: For the front on FG 2WD buggies:y0322/01 - M1, 2,1 x 50 mm, yellowy0322/02 - M2, 2,2 x 50 mm, orangey0322/03 - M4, 2,4 x 50 mm, purpley0322/04 - M5, 2,5 x 50 mm, blueFor the rear on FG buggies, front and rear on FG monster cars and 4WD buggies:y0323/01 - M11, 2,1 x 90 mm, yellowy0323/02 - M12, 2,2 x 90 mm, orangey0323/03 - M13, 2,3 x 90 mm, redy0323/04 - M14, 2,4 x 90 mm, purpley0323/05 - M15, 2,5 x 90 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackFor the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackContents:2 pieces

€17.90*

Average rating of 0 out of 5 stars

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Average rating of 0 out of 5 stars

y6106/07 Wheel square 11,5mm, steel
Two wheel squares with 3mm dowel pins. Like FG 6106/07, but made from heat treated steel. Significantly reduced wear. The pins prevent the squares from damaging the rims under high load. For all FG rims, holes may have to be drilled. Pins should be fitted using high strength thread locking compound.Measures:18 mm square11.5mm wideBore diameter 8 mm

€19.90*

Average rating of 0 out of 5 stars

6496 FG Alloy front bulkhead 2WD A and B
Genuine FG spare/option part.CNC-manufactured front axle mounts A and B in alloy with rebound stop. The borings for the wishbone pins are equipped with guide bushes. Suitable for Marder, Marder Race, Beetle On-/Off-Road and Monster models.Contents:1 set

€89.90*

Average rating of 0 out of 5 stars

y0932 HT Alloy front uprights for FG / Smartech
Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*

Average rating of 0 out of 5 stars

y1037 HT Aluminum brake cable bracket
Genuine HT spare/option part.For secure installation of the brake cables.Contents:1x Brake cable bracket2x Socket head cap screws 3 x 25 mm2x Self-locking hexagon nut M3

€17.90*

Average rating of 0 out of 5 stars

y0264 C-clips with handle 4 - 6 mm
clipse_griff Size: y0264/06 - 6 mm
Genuine HT spare/option part.Quick change clips for installation and de-installation without tools, galvanic zinc plated.Spring steel, hardened and tempered to 1450 to 1600 N/mm² tensile strength.Available for 4, 5 and 6 mm shafts.Contents:10 pieces

€4.90*

Average rating of 0 out of 5 stars

y6107/07 Wheel squares 18 mm HART-COAT, 12 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)12 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 12 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Content:2 pieces

€16.45*

Average rating of 0 out of 5 stars

y1068 HT Aluminum shock tower set 2WD
Genuine HT spare/option part.Set includes shock tower Marder y1032, fits Marder, Beetle, Pajero, Monster Beetle Aluminum bulkhead brace for y1031.Contents:1 set

€69.90*

Average rating of 0 out of 5 stars

y0324 Off-Road tuning spring Dirt-Spring M0
federn_dirt_m0 Version: y0324/05 - M05, blue
Genuine HT spare/option part. Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. All springs have an inner diameter of 21 mm.Available in several versions.For the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, blueContent:2 pieces

€17.90*

Customers also viewed

Average rating of 0 out of 5 stars

68515 FG Tuning Conversion Kit for front and rear axle, Marder
Genuine FG spare/option part. Individual prices of the parts in the tuning set: 847,06 EurosAluminum conversion kit to aluminum front axle and aluminum rear knuckle and wishbone for FG Marder.Contents:1 set

€424.95*

Average rating of 0 out of 5 stars

13401/13402 Lower front a-arms front for FG Marder, FG Buggy with rose joints a.s.o.
Lower front a-arms for all cars of the Marder family. Made from high quality aluminum, the arms are light weight, stiff and durable. They feature plastic bushings for the hinge pin and come with the required set of rose joint and conical spacer inluded.Contents:1x L/h a-arm with hardware1x R/h a-arm with hardware2x Rose joints4x Conical spacers

€129.90*

Average rating of 0 out of 5 stars

6048 FG Steel gearwheel big 48 teeth
Genuine FG spare/option part. Differential spur gear for all FG street cars except Formula 1. Can also be used as a main spur gear on the layshaft on monster models when mounted on alloy gear carrier y0190.Dimensions:Outer diameter: 75 mmWidth: 7.5 mmBore: 45 mmModule: m=1,5Contents:1 piece

€52.90*

Average rating of 0 out of 5 stars

4429/01 FG Steel balljoint Ø5/M8
Genuine FG spare/option part.Steel ball-and-socket joint with 5mm bore in the ball and M8 right-hand thread for installation on the wishbones.Delivery contains all needed pin disks.Dimensions:A = 5 mmB = M8C = 8 mmD = 16 mmE = 37.5 mmContent:2 pieces

€57.10*

Average rating of 0 out of 5 stars

y1137/03 GPM-Big Bore Premium shock absorbers for FG Marder/Offroad Buggy 4WD, set
Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled.  Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models:  FG 4WD: Marder, Off-Road Buggy  Set contents: Four long shock absorbers, one pair of shock absorbers has the upper mount with 5 mm bore. We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers.  The original springs can also be used on FG models!  Silicone oil recommendation:  The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures.  If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended.  One 50 ml bottle of y0038 is sufficient for five long or six short dampers.

€149.90*

Average rating of 0 out of 5 stars

8140 FG Alloy plate for front axle - 1pce.
Item N° 8140 Alloy plate for front axle - 1pce.Alloy plate for front axle on touring cars.

€11.50*

Average rating of 0 out of 5 stars

R040 UFRC Trailing arm cover B
Genuine UFRC spare/option part. Fits Ghost Rabbit GR1.Contents:1 pieces

€7.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development