Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6099/01 FG Front shock mount for Monster-Truck

Product information "6099/01 FG Front shock mount for Monster-Truck"

Genuine FG spare/option part.

Suitable for all FG Monster-Truck und MB-Pro models.

Dimensions:
  • Height: 92 mmWidth: 160 mm


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

y18004 HT-alloy shock tower for 2WD Monster-Truck
Shock tower, replaces FG # 6099/1.

€69.90*

Customers also bought

Average rating of 0 out of 5 stars

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition
To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Average rating of 0 out of 5 stars

6029/08 FG Ball-and-socket joint for M8
Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

GPM Starter cover, no. BJPSCO
Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.If using a FG monster / stadium model an additional hole for the support of the lateral carrier plate has to be cut out.

€25.60*

Average rating of 0 out of 5 stars

y0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)
Hobbythek car bag for 1/6 cars. Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cmWidth: 50 cmHeight: 40 cm

€54.90*

Average rating of 0 out of 5 stars

6175 FG Body support Monster models
Genuine FG spare/option part.Dimensions:Length: 170 mmWidth: 28 mmThickness: 5 mmContents:1 piece

€5.90*

Average rating of 0 out of 5 stars

7154 FG Body mount adjustable, 1 pce.
Adjustable body mount with heigt-adjustable body support.Measures:Length 110 mmDiameter 8 mm10 mm at the baseFor all cars and body shells.

€9.95*

Similar products

Average rating of 0 out of 5 stars

6113 FG Wheel nuts M6 self-locking
Genuine FG spare/option part.Self locking wheel nuts with serrated base.Part is delivered in silver or black color from vendor!Contents:10 pieces

€7.30*

Average rating of 0 out of 5 stars

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

Average rating of 0 out of 5 stars

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Average rating of 0 out of 5 stars

6106/07 FG Wheel square 11,5mm - 2pcs.
Wheel squares with 3 mm dowel pins. The pins prevent the squares from damaging the rims under high load. For all FG rims, holes may have to be drilled.11,5mm wide.Bore diameter 8 mm18 mm square

€23.90*

Average rating of 0 out of 5 stars

6115 FG Wheel nuts M8 with clamping
Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Contents:10 pieces

€6.90*

Average rating of 0 out of 5 stars

6106/05 FG Snap rings 19,5mm for wheel square
Genuine FG spare/option part. Securing ring for positioning the brake disk on 11.5, 14 and 17mm square drives.Inner diameter unstretched 19.5 mm.Part is delivered in silver or black color from vendor!Contents:4 pieces

€4.60*

Average rating of 0 out of 5 stars

6094/01 FG Damper spring rear 2,2 x 100 mm
Genuine FG spare/option part. Suitable for 6083 and 6481.Dimensions:Length: 100 mmWire diameter: 2,2 mmOuter diameter: 25 mmContents:1 piece

€7.90*

Average rating of 0 out of 5 stars

6107 FG Wheel square 9,5mm/M6
Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 9,5 mm Width: 17 mmBore: 8 mmContent:1 pieces:

€15.90*

Average rating of 0 out of 5 stars

6107/02 FG wheel square 17 mm/M6
Genuine FG spare/option part. Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:Square: 18 mm Width: 17 mmBore: 8 mmContents:2 pieces

€16.90*

Average rating of 0 out of 5 stars

6100/04 FG Turnbuckle left/right M8/40mm
Genuine FG spare/option part.steel version, 40 mm. Fits all FG except Formula 1.Contents:2 pieces

€10.95*

Average rating of 0 out of 5 stars

6096 FG Shock retaining screw M5
Genuine FG spare/option part.Suitable for all FG models for lower damper fastening except monster/stadium models with dual shock axles.Part is delivered in silver or black color from vendor!Dimensions:Length 23 mmThreaded length 7 mmShaft diameter 3.7 mmContents:4 pieces

€11.90*

Average rating of 0 out of 5 stars

6088 FG Lower shock plug A+B
Genuine FG spare/option part. Spare part for 6083 and 6084. Contents:2 pieces

€7.90*

Customers also viewed

Average rating of 0 out of 5 stars

y18004 HT-alloy shock tower for 2WD Monster-Truck
Shock tower, replaces FG # 6099/1.

€69.90*

Average rating of 0 out of 5 stars

6142 FG Alloy plate front axle for Monster-Truck
Genuine FG spare/option part. Fits all monster and stadium cars.Content:1 piece

€16.50*

Average rating of 0 out of 5 stars

y1032 HT Aluminum shock tower Marder 2WD
Genuine HT spare/option part.Fits Marder, Beetle, Pajero and Monster Beetle,Material thickness:6 mmContents:1 piece

€47.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development