y1031 HT Aluminum bulkhead brace for 2WD

rc-car-online

€32.90*

Prices incl. VAT plus shipping costs

Available

Product number: y1031

EAN: 4058575021056

Product information "y1031 HT Aluminum bulkhead brace for 2WD"

Genuine HT spare/option part.

Reinforces the front suspension and doubles the mounting plate for the shock tower.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

7352 FG Fuel tube for Zenoah, 1 pce.

Spare part for 7348 also suitable for the Losi 5ive-T.Measures:Inner diameter: 3.2 mm Length: 400 mm

€7.60*

6496 FG Alloy front bulkhead 2WD A and B

Genuine FG spare/option part.CNC-manufactured front axle mounts A and B in alloy with rebound stop. The borings for the wishbone pins are equipped with guide bushes. Suitable for Marder, Marder Race, Beetle On-/Off-Road and Monster models.Contents:1 set

€89.90*

6546/02 FG receiver battery Ni-MH 6V 3600mAh

Genuine FG spare/option part.Measures:Width: 111 mmHeight: 47 mmDepth: 23 mmContents:1 piece

€37.50*

TT1530/260 Top Tuning 6000 mAh LiPo receiver battery 2S, 7,4V 5C

Typical featuresLow inner resistance with high MPVHigher energy density with lower weightLonger lifecycle under proper usage, up to 200 timesFor LiPo batteries, the peak amp rate is usually twice the continuous crateRecommended charge with 1CSpezification:Tension: 2S / 7,4VCapacity mAh: 6000Case: SoftCable cross section: 12AWG/3,3Length +/- 5 mm: 142 mmWidth +/- 1,5 mm: 44 mmHeight: +/- 1,5 mm: 18 mmWeight +/- 10g: 243 mmCont. current: 5C (30A)Connectors: Universal and EC3, XH-balancer. Battery color may vary!Contents:1 piece

€59.90*

Configure now

SPMX40002SRX Spektrum 7.4V 4000mAh 2S 30C Smart LiPo Battery, receiver battery, IC3

LiPo batteries with Spektrum Smart technology practically take care of themselves. When combined with a Spektrum Smart Battery Charger, the unique parameters, history of the battery and more are all available the instant its connected. Charging a Smart Battery is easy as it gets, plus Smart LiPo battery packs are programmable to meet your exact charging needs. But the crowning feature of a Spektrum Smart LiPo battery is that it can be programmed to safely self-discharge to storage condition. Thats a Smart Battery pack!Spektrum Smart technology is about offering a higher connection to your hobby. Its a connection that puts you in complete control, makes you more aware and more confident about the capability of your equipmentall the while making your hobby easier. The combined result will make you wish everything about your hobby was smarter. Spektrum Smart LiPo Batteries are a part of a wide series of Smart technology products now available.Feature OverviewYoull never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger Start button. Smart technology takes care of the rest.Every Smart LiPo battery is factory assembled with the next-generation IC3 or IC5 output connector thats conveniently compatible with older devices equipped with robust EC3 and EC5 connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.Spektrum Smart LiPo Batteries Store Unique Data, such as:Battery BrandBattery TypeBattery CapacityBattery C RatingIndividual Cell VoltageBattery TemperatureCharge/Discharge CyclesSpektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery youve chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the Start button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.Specification:Application: SurfaceBattery Type: Smart LiPoBattery Voltage: 7.4VCapacity: 4000 mAhConnector Type: IC3Height: 1.2 in. (30mm)Length: 3.5 in. (90mm)Number of Cells: 3Weight: 170gWidth: 1.3 in. (34mm)Contents:1 piece

€49.99*

y0650 X-Zell 1,2V/2100 mAh NI-MH, rechargeable AA-battery

High-quality NiMH battery with maxE technology - due to the very low self-discharge, about 80% of the initial capacity is still available after one year.Ideally suited for toys, model making, camera, remote control, flashlight, clock, alarm clock and other technical devices.NiMH rechargeable batteries can basically be used wherever disposable batteries are used.By using NiMH rechargeable batteries, you can reduce costs and help our environment.This battery can last up to 1000 charging cycles. The battery is delivered pre-charged. High cycle stability. high power output fast charging capability increased operating time in electronic devices. long life without memory effect environmentally friendly heavy metal free EAN: 4042883419025 Contents:1 piece

From €3.90*

Details

Similar products

y1036 HT rose joints with conical spacers

Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

y0324 Off-Road tuning spring Dirt-Spring M0

federn_dirt_m0 Version: y0324/05 - M05, blue

Genuine HT spare/option part. Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. All springs have an inner diameter of 21 mm.Available in several versions.For the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, blueContent:2 pieces

€17.90*

y0321 Off-Road tuning springs Dirt-Spring M

federn_dirt_m Version: y0323/05 - M15, blue

Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. The rear springs will also fit Hurrax shocks. All springs have an internal diameter because of the manufacturing progress: 21 up to 21,5 mm. Available in several versions: For the front on FG 2WD buggies:y0322/01 - M1, 2,1 x 50 mm, yellowy0322/02 - M2, 2,2 x 50 mm, orangey0322/03 - M4, 2,4 x 50 mm, purpley0322/04 - M5, 2,5 x 50 mm, blueFor the rear on FG buggies, front and rear on FG monster cars and 4WD buggies:y0323/01 - M11, 2,1 x 90 mm, yellowy0323/02 - M12, 2,2 x 90 mm, orangey0323/03 - M13, 2,3 x 90 mm, redy0323/04 - M14, 2,4 x 90 mm, purpley0323/05 - M15, 2,5 x 90 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackFor the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackContents:2 pieces

€17.90*

y0932 HT Alloy front uprights for FG / Smartech

Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*

y0264 C-clips with handle 4 - 6 mm

clipse_griff Size: y0264/06 - 6 mm

Genuine HT spare/option part.Quick change clips for installation and de-installation without tools, galvanic zinc plated.Spring steel, hardened and tempered to 1450 to 1600 N/mm² tensile strength.Available for 4, 5 and 6 mm shafts.Contents:10 pieces

€4.90*

6103/05 FG Alloy upright front 1:6 2WD

Genuine FG spare/option part. Suitable for all FG 2WD Off-Road models. Not suitable for Monster-Truck models.Bearing seats 22x7 mm.Contents:1 set

€109.50*

y6106/07 Wheel square 11,5mm, steel

Two wheel squares with 3mm dowel pins. Like FG 6106/07, but made from heat treated steel. Significantly reduced wear. The pins prevent the squares from damaging the rims under high load. For all FG rims, holes may have to be drilled. Pins should be fitted using high strength thread locking compound.Measures:18 mm square11.5mm wideBore diameter 8 mm

€19.90*

y6107/07 Wheel squares 18 mm HART-COAT, 12 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)12 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 12 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Content:2 pieces

€16.45*

6496 FG Alloy front bulkhead 2WD A and B

€89.90*

6496/02 FG Alloy front bulkhead 2WD B - 1pce.

CNC-manufactured front axle mount B in alloy. Suitable for 2WD Marder, Marder Race, Beetle On-/Off-Road and Monster models.

€28.50*