EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

y0916 Original Zenoah G290 rebuild kit, set

€94.90*

Prices incl. VAT plus shipping costs

Available

Product number: y0916
EAN: 4058575036906

Product information "y0916 Original Zenoah G290 rebuild kit, set"

Rebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:
  • Cylinder G290
  • Piston G290
  • Piston ring G290
  • Piston pin G290
  • Piston pin retainer clips
  • Cylinder gasket


Please note:

It is recommended to use a gasket sealer with every gasket on an engine.
This gives better sealing anda longer lasting gasket. We also recommend:

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Accessories / Spare parts

y804 HT-flange sealer 518, 50 ml up to 200°C
y804 HT-flange sealer 518, 50 ml up to 200°C
Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*
y19015 Bindulin Dichtfix (untill 180°!)
y19015 Bindulin Dichtfix (untill 180°!)
Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams

Content: 45 Gramm (€331.11* / 1000 Gramm)

€14.90*
y0994 Marston heat-proof sealer - 1pce.
y0994 Marston heat-proof sealer - 1pce.
Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube

Content: 80 Milliliter (€123.75* / 1000 Milliliter)

€9.90*
y0807 MD-Sil RTV silicone sealer
y0807 MD-Sil RTV silicone sealer
Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml

Content: 80 Milliliter (€211.25* / 1000 Milliliter)

€16.90*

Customers also bought

y0915 Original Zenoah G270 rebuild kit, set
y0915 Original Zenoah G270 rebuild kit, set
Rebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€84.90*
Carburetor Walbro WT 990
Carburetor Walbro WT 990
7855 Carburetor type: Walbro WT990 Standard carburetor for Zenoah G290. Typ: Walbro WT990 Fits all Zenoah G230/240/260/270 and 290 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.

€79.90*
Configure now
y1469 Sheet drill with protective cap, up to 14 mm
y1469 Sheet drill with protective cap, up to 14 mm
The perfect tool for drilling perfectly round holes without cracks into a body shell.The cap protects the extremely sharp and spiky tip, the convenient handle provides secure grip on the tool.Dimensions:For holes up to 14 mm diameterLength of tip: approx. 45 mmTotal length: approx. 132 mmContent:1 Piece

€24.90*
y1406/01 MadMax BIG DIGGER 170x80/x60 for HPI + Losi (24 mm hex drive)
y1406/01 MadMax BIG DIGGER 170x80/x60 for HPI + Losi (24 mm hex drive)
BIG DIGGER 170x80 and 170x60 with black MadMax Extreme rims with 20 beadlock screws, with 24 mm hex socket and reinforced silver headlock rings for Losi 5ive-T and Desert Buggy XL as well as all HPI Baja 5 cars.The MadMax tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Due to the extreme load created by the MadMax BIG DIGGER tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars like the Losi 5ive-T.We recommend to check the beadlock screws after the run. Dimensions:Outside diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex wheel drive The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

€119.90*
Configure now
y0994 Marston heat-proof sealer - 1pce.
y0994 Marston heat-proof sealer - 1pce.
Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube

Content: 80 Milliliter (€123.75* / 1000 Milliliter)

€9.90*
y1524 Complete screws/nuts/washers set for HPI Baja / Carson 1:5 Wild GP Attack
y1524 Complete screws/nuts/washers set for HPI Baja / Carson 1:5 Wild GP Attack
Complete set of screws, nuts and washers for HPI Baja 1/5 vehicles.The set includes a total of 434 screws, nuts and washers in different quantities which are all used on HPI Baja 1/5 vehicles and Carson 1:5 Wild GP Attack.11 sizes of cap head screws9 sizes of CSH screws10 sizes of button head screws4 sizes of set screws2 sizes of washers3 sizes of lock washers3 sizes of self-locking nuts2 sizes of nuts with serrated flange2 sizes of flanged self tapping screwsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:20 piecesM3x126 piecesM3x4510 piecesM4x612 piecesM4x1212 piecesM4x2510 piecesM4x306 piecesM4x507 piecesM5x206 piecesM5x306 piecesM5x356 piecesM6x25CSH screws in 10.9:10 piecesM3x2010 piecesM4x1019 piecesM5x1616 piecesM5x206 piecesM5x302 piecesM5x407 piecesM6x14Button head screws in 10.94 piecesM3x1610 piecesM3x303 piecesM4x166 piecesM5x123 piecesM5x302 piecesM5x356 piecesM5x406 piecesM5x452 piecesM6x306 piecesM6x30Grub screws:6 piecesM3x39 piecesM4x46 piecesM4x124 piecesM6x45Washers in Din125:10 pieces3,2x6,8x0,512 pieces4,3x8,7x0,8Safety washers:20 piecesM420 piecesM520 piecesM6Self-locking nuts:10 piecesM310 piecesM415 piecesM5Flanged nuts with serrated base:21 piecesM410 piecesM5CSH screws Torx:10 piecesM4x15 (4,2x16)10 piecesM4x18 (4,2x19)Schneidschrauben Torx mit flanged:10 piecesM2,6x1012 piecesM3x10

€44.90*

Similar products

y0915 Original Zenoah G270 rebuild kit, set
y0915 Original Zenoah G270 rebuild kit, set
Rebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€84.90*
7387 FG Rebuilt kit Zenoah G230, set
7387 FG Rebuilt kit Zenoah G230, set
Cylinder-piston repair kit for Zenoah engine G230. Set includes the following parts:Cylinder, piston, piston ring, cylinder foot gasket, centering disks, piston pin clip.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€69.90*
y0913 Original Zenoah G260 rebuild kit fits too CY, Losi and HPI engines, set
y0913 Original Zenoah G260 rebuild kit fits too CY, Losi and HPI engines, set
Rebuild kit for the Zenoah G260/04 engine to replace piston/cylinder related parts, fits the previous G260 engines as well. The kit includes the following parts:Cylinder G260Piston G260Piston ring G260Piston bolt G260Piston pin retainer clipsCylinder gasketThis kit can also be installed on CY26, HPI and Losi engines, but you have to use Zenoah needle bearing 7312 and spacer washers 7312/0 for this application! Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*
y0914 Original Zenoah G240 rebuild kit, set
y0914 Original Zenoah G240 rebuild kit, set
Rebuild kit for the Zenoah G240 engine to replace parts. The kit includes the following parts:Cylinder G240Piston G240Piston ring G240Piston pin G240Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*
Original Zenoah repair-kits for 230/240/260/270/290/320 engines
Original Zenoah repair-kits for 230/240/260/270/290/320 engines
7387 Rebuilt kit Zenoah G230Cylinder-piston repair kit for Zenoah engine G230. Set includes the following parts:Cylinder G230Piston G230Piston ring G230Cylinder foot gasketCentering disksPiston pin clipy0914 Original Zenoah G240 rebuild kitRebuild kit for the Zenoah G240 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G240Piston G240Piston ring G240Piston pin G240Piston pin retainer clipsCylinder gaskety0913 Original Zenoah G260 rebuild kit fits too CY, Losi and HPI enginesRebuild kit for the Zenoah G260 engine to replace piston/cylinder related parts, fits the G260 engines as well. The kit includes the following parts:Cylinder G260Piston G260Piston ring G260Piston pin retainer clipsCylinder gasketThis kit can also be installed on CY26, HPI and Losi engines, but you have to use Zenoah needle bearing 7312 and spacer washers 7312/01 for this application! y0915 Original Zenoah G270 rebuild kitRebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gaskety0916 Original Zenoah G290 rebuild kitRebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G290Piston G290Piston ring G290Piston pin G290Piston pin retainer clipsCylinder gaskety1016/095 Original Zenoah 32 cm³ 4 Bolt Rebuilt kitOriginal Zenoah 32 cm³ Rebuilt kit Top quality with Zenoah warranty!Set includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipThrust washer for needle bearingCover for transfer portAttention: For the assembling of the covers enclosed please use the HT-flange sealer y804 and pay attention to the assembling instructions enclosed.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 19015 Bindulin Siliconey0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*
Configure now
7786 FG Original Zenoah 4 Bolt Cylinder/Piston set from 23 cm³ or 26 cm³ to 29 cm³ for the G240 and G270 to 290, set
7786 FG Original Zenoah 4 Bolt Cylinder/Piston set from 23 cm³ or 26 cm³ to 29 cm³ for the G240 and G270 to 290, set
The first 29 cc conversion kit made by Zenoah. Top quality with Zenoah warranty!Set includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipSpark plugMore power through more displacement! Please note that fhe following limimitations for displacement apply at official races: 1/5 ON-ROAD 2WD max.23 cm³1/5 ON-ROAD 4WD max.26 cm³1/5 Formula 1 max.26 cm³1/6 OFF-ROAD 2WD + 4WD26 cm³Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:More power through more displacement! Please note that fhe following limimitations for displacement apply at official races: 1/5 ON-ROAD 2WD max.23 cm³1/5 ON-ROAD 4WD max.26 cm³1/5 Formula 1 max.26 cm³1/6 OFF-ROAD 2WD + 4WD26 cm³Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€99.90*
y1016/095 Original Zenoah 32 cm³ 4 Bolt Rebuilt kit
y1016/095 Original Zenoah 32 cm³ 4 Bolt Rebuilt kit
Original Zenoah 32 cm³ Rebuilt kit Top quality with Zenoah warranty!Set includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipThrust washer for needle bearingCover for transfer portAttention: For the assembling of the covers enclosed please use the HT-flange sealer y804 and pay attention to the assembling instructions enclosed.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€109.90*
7385 FG Original Zenoah 2 Bolt Cylinder/Piston from 23 to 26 cm³ for the G230
7385 FG Original Zenoah 2 Bolt Cylinder/Piston from 23 to 26 cm³ for the G230
Genuine FG spare/option part. Conversion set from G230 with 23 cm³ to G260 with 26 cm³. Set includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipSpark plugMore power through more displacement! Please note that fhe following limimitations for displacement apply at official races: 1/5 ON-ROAD 2WD max.23 cm³1/5 ON-ROAD 4WD max.26 cm³1/5 Formula 1 max.26 cm³1/6 OFF-ROAD 2WD + 4WD26 cm³Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:More power through more displacement! Please note that fhe following limimitations for displacement apply at official races: 1/5 ON-ROAD 2WD max.23 cm³1/5 ON-ROAD 4WD max.26 cm³1/5 Formula 1 max.26 cm³1/6 OFF-ROAD 2WD + 4WD26 cm³Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€97.95*
7389 FG Original Zenoah 4 Bolt rubuild kit from 23 cm³ to 26 cm³ for the G240
7389 FG Original Zenoah 4 Bolt rubuild kit from 23 cm³ to 26 cm³ for the G240
Cylinder-piston repair kit for Zenoah engine G240 (to increase displacement to 26 cm³). Set includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipSpark plugMore power through more displacement! Please note that fhe following limimitations for displacement apply at official races: 1/5 ON-ROAD 2WD max.23 cm³1/5 ON-ROAD 4WD max.26 cm³1/5 Formula 1 max.26 cm³1/6 OFF-ROAD 2WD + 4WD26 cm³Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:More power through more displacement! Please note that fhe following limimitations for displacement apply at official races: 1/5 ON-ROAD 2WD max.23 cm³1/5 ON-ROAD 4WD max.26 cm³1/5 Formula 1 max.26 cm³1/6 OFF-ROAD 2WD + 4WD26 cm³Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€74.90*

Customers also viewed

y1016/051 Carburetor WT1107 G320RC
y1016/051 Carburetor WT1107 G320RC
Genuine Zenoah spare/option part. Replacement part fits Zenoah G320RC.

€79.90*
5754/08 FG Spacer plate for Chung Yang
5754/08 FG Spacer plate for Chung Yang
Genuine FG spare/option part.Installs between carb and air filter/airbox to assure choke flap clearance.Contents:1 piece

€4.50*
7473/02 FG Engine flange for engine quick mount - 1 piece
7473/02 FG Engine flange for engine quick mount - 1 piece
Spare part for FG .Outer diameter engine flange 64 mm.

€43.90*
y0994 Marston heat-proof sealer - 1pce.
y0994 Marston heat-proof sealer - 1pce.
Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube

Content: 80 Milliliter (€123.75* / 1000 Milliliter)

€9.90*
y19015 Bindulin Dichtfix (untill 180°!)
y19015 Bindulin Dichtfix (untill 180°!)
Bindulin liquid rubber - very high elasticitySuitable for additional sealing of tuned pipes and exhaust / manifold connections .Temperature resistant from -60 ° to + 180 ° CResistant against diluted acids.Also for sealing threaded joints, electric lines and cable lead-throughs in receiver boxes.The surfaces must be clean, grease free and dry (brake cleaner).Contents:1 piece / 45 grams

Content: 45 Gramm (€331.11* / 1000 Gramm)

€14.90*
Original Zenoah repair-kits for 230/240/260/270/290/320 engines
Original Zenoah repair-kits for 230/240/260/270/290/320 engines
7387 Rebuilt kit Zenoah G230Cylinder-piston repair kit for Zenoah engine G230. Set includes the following parts:Cylinder G230Piston G230Piston ring G230Cylinder foot gasketCentering disksPiston pin clipy0914 Original Zenoah G240 rebuild kitRebuild kit for the Zenoah G240 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G240Piston G240Piston ring G240Piston pin G240Piston pin retainer clipsCylinder gaskety0913 Original Zenoah G260 rebuild kit fits too CY, Losi and HPI enginesRebuild kit for the Zenoah G260 engine to replace piston/cylinder related parts, fits the G260 engines as well. The kit includes the following parts:Cylinder G260Piston G260Piston ring G260Piston pin retainer clipsCylinder gasketThis kit can also be installed on CY26, HPI and Losi engines, but you have to use Zenoah needle bearing 7312 and spacer washers 7312/01 for this application! y0915 Original Zenoah G270 rebuild kitRebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gaskety0916 Original Zenoah G290 rebuild kitRebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G290Piston G290Piston ring G290Piston pin G290Piston pin retainer clipsCylinder gaskety1016/095 Original Zenoah 32 cm³ 4 Bolt Rebuilt kitOriginal Zenoah 32 cm³ Rebuilt kit Top quality with Zenoah warranty!Set includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipThrust washer for needle bearingCover for transfer portAttention: For the assembling of the covers enclosed please use the HT-flange sealer y804 and pay attention to the assembling instructions enclosed.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 19015 Bindulin Siliconey0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*
Configure now
y0801/01 SPEED TEC CRANK race ported top end set G240
y0801/01 SPEED TEC CRANK race ported top end set G240
Race ported top end set for Zenoah G240 engine.The SPEED TEC CRANK genuine Zenoah G230 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Crank version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledMachined and polished exhaust and intakeThe case is specially matched with enlarged and polished cross section towards the ports Piston: Weight reducedSkirt shortenedPiston above and below piston ring tapered and piston dome polished The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC CRANK top end set, we recommend the use of a tuned pipe ().

€259.90*
Details
This website uses cookies to ensure the best experience possible. More information...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development