29 products found for "y04474"

rc-car-online - Home

y04474 HT Rear upper alloy wishbone 2WD

Genuine HT spare/option part.Rear upper alloy wishbone with droop stop. Replacement for plastic wishbone FG 6074/02.Will also fit the following Carson/Smartech cars:Onroad chassis C5, Attack, Super Attack, Gas Blaster and TouaregCarson Comanche, Attack Evo, CRT + CPT when installedwith 75 mm turnbuckle y0988Comes with 2 M8 low height nuts included. Contents:2 pieces

€69.90*

y04475 HT Rear alloy shock mount 2WD

Genuine HT spare/option part.Rear alloy damper plate with several adjustment possibilities of the shock absorbers. Replacement for FG plastic rear shock tower FG 7072/01Please note: When installing in combination with plastic diff mounts you should insert a-arms with hinge pins before bolting together rear plate and diff mounts.Content:1 pieces

€89.90*

Charging cable for receiver battery with AMP plug, y0447, 1 pcs.

Charging cable for all hump packs an batteries with AMP plug. Also fits for the internal charging jack from the HPI Baja 5b and the HPI Baja 5t cars.

€7.40*

y04476/021 HT Alloy rear diff mount l/h one-piece-solid

Genuine HT spare/option part. Suitable for all FG 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1.Contents:1 piece

€54.90*

y1444 Mounting bracket for tuned pipe mufflers

Genuine HT spare/option part. Extra large bracket with wide surface allows for the use of two strong cable ties at the same time. You can even use a hose clamp at ones own discretion. The bracket comes with M5 lens flange head screw, nut and washer as well as with special temperature resistant cable ties. Content:BracketEach M5 screw, nylock nut and washer4 x temperature resistant cable tie 4,8 x 290 mm

€9.90*

y0443 EC3 charging cord

Heavy gauge (14 AWG / 2 mm²) charging cord with EC3 plug and gold plated contacts. Especially for Losi/Horizon rx-batteries which feature an EC3 connector additionally to the regular rx-connector. The EC3 system can candle much higher charging rates which reduces charging time of high capacity battery packs significantly.Dimensions:Length approx. 20 cm

€8.90*

y04472/05 HT Rear lower alloy wishbone narrow

Genuine HT spare/option part.New designed rear lower alloy wishbone with replaceable guide bushes.Suitable for all FG 1:5 models with a width up to 400mm.Does also fit Carson Attack and Super Attack (not Evo!), C5, Smartech Spider and Ranger cars; also for Reely R5 and Big Pyro when used in combination with turnbuckle 6100/04.Please note: must use hinge pins 6075 instead of 6073!Scope of delivery:1x Alloy wishbone1x Socket head cap screw: 4 x 20 mm1x Socket head cap screw: 3 x 14 mm1x Socket head cap screw: 4 x 25 mm1x Washers steel 4,3 mm1x self-locking hexagon nut M42x hex nut M8 l/h thread4x Bearings with flangeContents:1 piece

€44.90*

y04476/02 HT Alloy rear diff mount l/h+r/h one-piece-solid

Genuine HT spare/option part. Suitable for all FG 2WD and Smartech/Carson 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1. Content:2 piece

€99.90*

y04476/022 HT Alloy rear diff mount r/h one-piece-solid

Genuine HT spare/option part. Suitable for all FG 2WD models except Evo 04/Competition 07/EVO 07 and Formula 1.Contents:1 piece

€54.90*

y0442 HT rim reinforcement all FG-Monster and Stadium rims

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Monster- and Stadium rims 6232, 6232/01, 6232/03, 6232/04, 6232/05 and 6232/06.14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces

€29.90*

y0464 Seal bearing set for the FG 4WD sportsline models, set

Complete seal bearing rate with 24 bearings for the FG Competition 4WD models. Quantity / Size / use4 pieces 6 x 15 x 5 mm - Front Pulley2 pieces 10 x 22 x 6 mm - Clutch Bell5 pieces 10 x 19 x 7 mm - layshaft / belt tensioner4 pieces 12 x 28 x 8 mm - Differential6 pieces 8 x 22 x 7 mm - wheel bearings2 pieces 17 x 26 x 7 mm - the inside front wheel bearingsTotal value of stock: 110,30 EUR

€74.90*

y0440 HT Rim reinforcement for FG rim 6105, 6105/01 and 3105

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Off-Road rims 6105, 6105/01 (white) and 3105 (silver).14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 pieces

€24.90*

y0244 Graupner/Spektrum Z590 Servo - 1pce.

Genuine Graupner/Spektrum Z590 servo, fully warranted.Torque 60 Ncm, speed 0,12 sec. dimensions 38 x 18,5 x 37 mm. Metal gears, ballraced.

€19.90*

4474 FG Rear upper alloy wishbone

Genuine FG spare/option part. Rear upper alloy wishbone with droop stop.Replacement for plastic wishbone FG 6074/02.Content:2 pieces

€83.50*

y1474 Aluminum foil tape, self-adhesive, 50 mm x 45 meters

Genuine HT spare/option part.50 mm wide, self-adhesive aluminum foil tape, especially for heat insulation; i.e. between tuned pipe and plastic or electronic components.Content:1 piece / 45 meters

€9.90*

y0544 Sanding fleece Gold Microfine Pads, 100 x 80 mm

y0544 Grit: y0544/03 - 1500er grit, grey

Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:

€4.90*

10444/01 FG Distance bush for 10444 and 10445 - 2pcs.

Spare part for 10444

€2.10*

y0487 Air filter adapter for Solo engines, 1 St.

With this adapter you get all the major solo air boxes mounted on her solo motor.

€9.90*

y04492 HT Rear lower alloy wishbone for FG 1/6 cars

Genuine HT spare/option part.Please note: must use hinge pins 6075 instead of 6073!Contents:1 piece

€49.90*

y0467 Complete gasket set for Zenoah G230, G260, and 2-bolt engine

The gasket set consists of 6 high-quality gaskets.

€14.90*

y0497 Alloy engine mount large for all FG 4WD Models

Large alloy engine mount for all FG 4WD cars.Contrary to the FG pack this one includes the complete hardware for installation in Sportsline cars as well!

€69.90*

y0441 HT Rim reinforcement for FG 60200 and 60205 rim

Genuine HT spare/option part.Rim reinforcement, transfers the load over a larger diameter into the rim and protects the rim's square. Will also allow for the use of rims with an already damaged square.For FG Off-Road rims 60200, 60201 (wide) and 60205, 60206 (narrow).14 mm wide square drives must be used.Please note:When installed with new (unused) rims, it may be necessary to modify the rim's square slightly.Contents:2 piece

€26.90*

Opel Vectra team decals Stern, y0274 - set

Stern team decals for Opel Vectra body shell.Sheet dimensions:475 x 225 mm475 x 190 mm

€26.80*

y0744 Differential Silicone oil / grease, viscosity 15.000 untill 2.000.000, 50 ml

y0744 Viscosity: y0744/04 - 100.000+ 2.9EUR

For changing the locking effect of large scale car differentials.Top quality in 50 ml plastic wide-neck bottles.Silicone oil / grease with a viscosity to choose:15.00030.00050.000100.000300.0001.000.0002.000.000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€316.00* / 1000 Milliliter)

Variants from €12.90*

€15.80* €17.80* (11.24% saved)

29 products found for "y04474"

Filter products

rc-car-online - Home