1058 products found for "losilos252020"

rc-car-online - Home

LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL

Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*

LOS252025 Differential Outdrive 6IX

Genuine Losi spare/option part.Content:2 pieces

€31.99*

LOS252023 Differential housing 6IX

Genuine Losi spare/option part.Content:1 pieces

€15.99*

LOS252022 Gear Box 6IX

Genuine Losi spare/option part.Contents:1 piece

€20.99*

LOS252018 Front Universal Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 piece

€59.99*

LOS252047 Losi CV rear Dogbone MTXL

Genuine Losi spare/option part.Contents:2 pieces

€49.99*

LOS252011 Stub Axle Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€39.99*

This product is no longer available.

LOS252012 Front/Rear Wheel Hex & Pin Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€29.99*

LOS252010 Differential Case Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:1 set

€29.99*

LOS252094 Losi Clutch Mount, 5ive-T 2.0

Genuine Losi spare/option part. Contents:1 piece

€49.99*

LOS252006 Front/Rear Differential Outdrive Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€29.99*

LOS252007 Center Differential Outdrive Set Losi DBXL+MTXL 1/5 4WD

Genuine Losi spare/option part. Contents:2 pieces

€39.99*

LOS252092 Losi Rear Center Dogbone: 5ive-T 2.0

Genuine Losi spare/option part. Contents:1 piece

€29.99*

LOS252091 Losi Front Center Dogbone, 5ive-T 2.0

Genuine Losi spare/option part. Contents:1 piece Hint: For the connection from the center diff to the front axle, the 5ive-T 2.0 can also be upgraded to the CVD system of the predecessor 5ive-T with genuine parts.To do this you only have to install the longer version CVD-shaft LOSB3216 instead of the former short one along with the drive shaft coupler and boot LOSB3220 at the front gearbox.

€29.99*

This product is no longer available.

LOS252019 Front Center Driveshaft Losi DBXL 1/5 4WD

Genuine Losi spare/option part. Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 piece

€59.99*