38 products found for "y1567"

rc-car-online - Home

y1564 XT90 Charging cable

Genuine HT spare/option part.Charging cable for batteries with XT90 connector, length approx. 30 cm, silicone insulated cable with gold-plated connectors.Contents:1 piece

€8.90*

y1067 Walbro WT668C carburetor

Genuine Walbro spare/option part.The Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever.The WT668B is also available with ball-raced throttle shaft under part number # y0036/04 Ballraced tuning Walbro WT668B carburetor The higher quality alternative is the Walbro WT603B, also with choke. Contents:1 piece

€69.90*

This product is no longer available.

y1563 Wheel nuts for Dirt Attack

Genuine rc-car-online spare/option part. Contents:4 pieces

€5.90*

y1569 Low voltage buzzer with voltage test

Genuine HTspare/option part. The LiPo Voltage Checker provides a low voltage alarm for 28S cell counts.When the voltage is below the set value, an alarm will sound along with illuminating the red LED.The voltage checker will automatically detect the cell count when connected to the balance lead on 28S LiPo. SpecificationsInput: 1S (JST) and 28S (JST-XH) LiPo, Li-ION/LiMN/Li-FeUnit Voltage Display Range: 0.54.5 VTotal Voltage Display Range: 0.536 VTest Mode Voltage Range: 3.730 VAlarm Value Range: 2.73.8 V, including offDimensions: 3.9 cm x 2.4 cm x 0.9 cmContents:1 piece

€9.90*

y1547 Complete screws set for Traxxas X-Maxx and XRT 4x4

Genuine rc-car-online spare/option part. Komplete set of screws set for the Traxxas X-Maxx and XRT 4x4.The set includes a total of 334 screws, in different quantities which are all used on the Traxxas X-Maxx 4x4.9 sizes of cap head screws2 sizes of CSH screws12 sizes of button head screws2 sizes of set screws3 sizes of button head screwsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:6 piecesM2,5x1410 piecesM3x102 piecesM3x1232 piecesM3x1420 piecesM3x166 piecesM3x1814 piecesM3x203 piecesM3x252 piecesM4x22Countersunk head screws in 10.9:3 piecesM4x1014 piecesM4x14Sheet metal screws in 10.96 piecesM3x650 piecesM3x88 piecesM3x82 piecesM3x102 piecesM3x1212 piecesM3x1644 piecesM4x1224 piecesM4x1424 piecesM4x166 piecesM4x2010 piecesM4x2516 piecesM4x302 piecesM4x35 Sheet metal screws with flange:14 piecesM3x103 piecesM3x123 piecesM3x16Grub screws:2 piecesM3x42 piecesM4x4

€44.90*

y1562 Porsche 911 body shell, Wheelbase 530 mm, clear

Fits on all standard width touring car chassis' with 530 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Rear wing available in the options menue. Replacement parts: 5192 FG Front Porsche 911 GTR3 R clear 5193 FG Rear Wing Porsche 911 GTR3 R clear Required body mounts:Mount front: FG 8418 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 940 mmWidth: 415 mmHeight: 230 mmWheelbase: 530 mm Painting tips:

€199.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1507 V2 HT206AC/DC Duo 2 6S professional 400W charger

Genuine HT spare/option part.Version V2 with new design and quieter fans.Designed by professionals, this system is extremely versatile. The HT206AC / DC Duo 2 is very easy to use with the vertically angled 4.3" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a total of three powerful fans, which prevent overheating even at high outside temperatures. The heat dissipation is also increased by the aluminum housing.It is possible to charge two different batteries simultaneously with different charging settings. The HT206AC / DC Duo 2 provides a total of 400 watts, 200 watts per channel. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Specifications: AC input voltage: 110 - 240VDC input voltage: 10 - 30VDC output power: 5 - 27V, 0.1 - 20ACharging Power: 2 x 200W (400W) Charge Current Range: 0.1 - 20 A x 2Discharge current range: 0.1 - 5 A x 2 Max Discharge power: 25W x2 (50W) balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VMax. USB output: 5V / 2ABattery Memory: 8 profilesSub-function: digital power, balancer, IR testFirmware upgrade: External mini USB deviceSize: 195 x 143 x 70 mmWeight: 1072g Content: b> 1 x HTRC HT206AC / DC DUO charger 2 x T60 on banana connector adapter 2 x Balancing Board1 x Mains cable li> 1 x Instruction manual

€349.90*

y1576 Aluminum split style servo arm for 15T spline output shafts

Genuine rc-car-online spare/option part.For most servos with a 15T output shaft.K-Power DM4000Multiplex RhinoHitech 805Savöx SV-0236MGSpectrum S9010 and S9020LOSB 0886 S901T (original Losi 5ive-T throttle/brake servo)LOSB 0884 S900S (original Losi 5ive-T steering servo)and many more! Dimension: Total length: 48 mm Hole distance: 30 mmIf you count the splines on your servo, you can see whether this servo arm will fit.Aluminum servo arms are a must with strong digital servos, as they are used e.g. in large scale cars.Contents:1 piece

€14.90*

y1565 Losi mechanical brake for 5ive-B/5ive-T 2.0 brushless incl. Losi HS901T Servo

Genuine Losispare/option part. Mechanical brake for retrofitting in an electric powered Losi 5ive-B or 5ive-T 2.0. An additional servo and a 3-channel remote control are required.If you run the maximum operating voltage approved for an ESC, there is a risk - especially in large scale cars - that under certain circumstances the reverse currents generated by the motor when braking will destroy the esc.For this reason, we recommend using a mechanical brake (as with gas powered vehicles).Please note that Reverse is no longer possible with this configuration!In the ESC settings, you must select the Forward/Brake operating mode. The brake by the controller must be deactivated or set to the lowest possible value. For this job a program card suitable for the ESC is usually required!Set includes: TLR252011 TLR Brake Disc, Pad and Screw Set 5ive-B LOSB3230 Losi Brake Cams & Bushings 5T, TLR 5ive-B and Mini LOSB5901 Losi Throttle/Brake Linkage Set 5T, TLR 5ive-B and Mini Servo mount for throttle / brake servoLosi Servo HS901T Contents:1 set

€199.90*

y1557 SPEED TEC CRANK race ported top end set G320 7-ports

Race ported top end set for Zenoah G320 engine. The SPEED TEC CRANK genuine Zenoah G320 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina.SPEED TEC CRANK version modifications: Cylinder: Adjustment of compressionThe ports have been enlargedThree additional ports (7-port) have been machinedFuel management milledMachined and polished exhaust and intakeThe case is specially matched with enlarged and polished cross section towards the portsy1016/002+3T Tuning transfer port covers:Reduced cross-section and flow-optimized transfer port cover plates for improved and faster gas flow for the Zenoah G320. The improved gas flow rate improves speed and gives faster throttle response in the medium rpm range. To improve mixture formation, the plates were glass bead blasted after machining. Piston:Weight reducedSkirt shortenedPiston above and below piston ring taperedSet includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipThrust washer for needle bearingCover for transfer portTo achieve the optimum performance gain of a SPEED TEC CRANK top end set, we recommend the use of a tuned pipe ().

€359.90*

y1587 Conversion kit to electric drive for Carson Wild Attack and HPI Baja 5B

The conversion kit contains all mechanical parts (no electric motor, esc and batteries) you need to convert a Carson Wild Attack or HPI Baja 5B to electric drive.Brushless motors from all common manufacturers with 56 - 58 mm diameter, about 100 - 115 mm motor can length, 700 - 850 KV and 8 mm output shaft will fit. We recommend the TT56112/700 Top Tuning Monster Brushless Motor 700 kV.For the esc,ZTW Beast 200A or other ESCs with similar dimensions and performance data are suitable.The battery box provides a total space of 180 x 84 x 50 mm for the batteries. Operation with 6S - 8S is recommended.The set contains: Battery and receiver box Complete aluminum motor mount Ball bearing for intermediate shaft Motor pinion Chassis struts and mounting plate for esc made of aluminum Extension cable for speed controller installation hardware Exploded view and assembly instructions

€269.90*

y1568 FG Formula 1 F2000 body shell with individual red F1 painting incl. rear wing and glued front spoiler Single copy

Genuine FG spare/option part. The set includes: 10250/02 FG Body set F2000 1.5 mm 10254 FG Rear spoiler for F1 10455 Frontspoiler 10265/03 y0312 Decals Contents:1 set

€548.00*

y1367 TURBO-TWIST 325 mm special carburetor screw driver

y1367 Version: y1367/01 - 1,0 x 5,5 x 325 mm

TURBO-TWIST, 325 mm long screw driver in top quality. Allows you to set the carburetor on almost any 1:5 / 1:6 model also with a mounted body shell.On most models, you have to adjust the motor with this screwdriver does not even stoop.Caution:May differ from picture!

€9.90*

y1527 Conversion Kit Carson Dirt Attack XXL to Dirt Monster

y1527 Color: White

Genuine rc-car-online spare/option part. This kit makes it possible to equip the Carson Dirt Attack XXL with a Hummer body shell. The kit contains all necessary parts such as body shell, body mounts and decals.This conversion kit fits the electric version of the Carson Dirt Attack only!Contents:1x Monster Truck body white or yellow1x 20155 FG Vehicle decals Monster1x 7154 Body mount2x 7155 Body mount adjustable1x 60237/01 FG Plastic brace1x 6815/03 FG Alloy mounting bolts bilateral with 4mm screw thread8x Screws M4x16

€199.90*

y1467 Full body shell installation kit with 10.9 screws for Losi 5ive-T/2.0 and Mini

y1467 Version: y1467/01 Set with Allen head screws 10.9

Genuine Smartech spare/option part.Includes the complete set 26 body mounting washers, 22 support plates and corresponding screws for an original Losi 5ive-T or Losi 5ive-Mini body.Your choice of screws with either Allen head or hexalobular drive (a.k.a. Torx) heads!Content:26 pieces of mounting washers22 pieces of support plates14 pieces of countersunk screws (DIN7991) Allen head M4 x 20, 10.9 grade Alternatively TX10 Torx head, 10.9 grade12 pieces countersunk screws (DIN7991) Allen head M4 x 16, 10.9 gradeAlternatively TX10 Torx head, 10.9 grade

€13.90*

y1560 Gear box oil for Lightscale STD / STX Smooth differential, 50 ml

y1560 Version: y1560/01 - Soft

Genuine Lightscale spare/option part. Contents:1 piece / 50ml

Content: 50 Milliliter (€258.00* / 1000 Milliliter)

€12.90*

y1564/10 XT150 Connectors

Genuine HT spare/option part.Set with two each male and female contacts and the corresponding housings.Contents:1 set

€6.90*

y1564/02 XT90-connector male / female

y1564_02 Version: y1564/02S - Male connector

Genuine HT spare/option part.Wählbare Versionen: y1564/02S - Male connector y1564/02B - Female connector y1564/02SB - One each male and female connectorContents:1 piece

€2.90*

y1564/13 Serial adapter EC8 to XT150

Genuine HT spare/option part.Adapter for connecting two batteries with EC8 connector in series to an esc with a single pair of XT150 connectors.Battery side with EC8 male, esc side with XT150 male for positive and female for negative.Allows the use of two batteries with EC8 connectors without soldering with the esc of the UFRC GX1.Contents:1 piece

€18.90*

y1564/01 XT60 connector male / female

y1564_01 Version: y1564/01S - Male connector

Genuine HT spare/option part.Wählbare Versionen: y1564/01S - Male connector y1564/01B - Female connector y1564/01SB - One each male and female connectorContents:1 piece

€1.90*

y1564/19 No-wire EC5 Parallel Y-harness

Genuine HT spare/option part.Optional equipment part for Axial Jeep Wrangler 4WD 1/6.Space-saving no-wire adapter, just 57 mm long.Attention: both batteries must have almost identical voltages at the moment when connecting them for parallel operation! Both batteries freshly fully charged from the charger is the easiest way to do this.Ideally, two identical batteries should also be used.Contents:1 piece

€12.90*

y1564/12 JR/Futaba/Universal Patch cable

Genuine HT spare/option part.JR/Futaba/Universal female to female extension, Length approx. 10 cm.Useful for wiring of the receiver inside the UFRC GX1 RX-box or similar applications. Contents:1 piece

€3.90*

y1564/11 Charging cable XT150

Genuine HT spare/option part.Battery side with XT150 female for positive and male for negative.Contents:1 piece

€8.90*

y1564/14 No-wire adapter EC5 male to EC3 connector female

Genuine HT spare/option part.Space-saving no-wire adapter, just 50 mm long.Contents:1 piece

€6.90*

38 products found for "y1567"

Filter products

rc-car-online - Home