241 products found for "zahn_0004"

rc-car-online - Home

HT-Differential ring gear, 50T, y0201 - 1pce.

Reinforced version with heavy gauge tooth base. Recommended for monster models and all buggies.Does not fit Elcon differential!Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€49.90*

y0202 HT-Differential ring gear, extreme duty, 41Teeth

Genuine HT spare/option part.Coarse pitch spur gear for the differential, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Fits FG cars and Smartech / Carson 2WD cars.Only for use with the extreme duty pinions! Not for use in combination with Elcon rear drivetrain unit or Elcon differential!Module: m=1,75.Contents:1 piece [INCLUDE]profilverschoben[ENDINCLUDE]

€49.90*

HT-Nitrited steel pinions for all FG and 1/5 scale Carson / Smartech C5

Non-standard sizes use two numbers for definition. The second number gives the size of the corresponding ring gear.Attention: not suitable for 1/6 scale Smartech / Carson 2WD Off-Road models. (Link to the Carson Smartech pinions: here)Pinions up to 16T can be used on the layshaft as well.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Teeth:Item no.:13 Teeth HT y026814 Teeth FG 604614 to 48 Teeth HT y011615 to 48 Teeth FG 604715 to 48 Teeth HT y19354 wide16 to 48 Teeth FG 643116 to 48 Teeth FG 6431/1 wide17 to 48 Teeth HT y19355-116 to 46 Teeth HT y011917 to 46 Teeth HT y1935518 to 46 Teeth FG 643219 to 46 Teeth HT y1935718 to 44 Teeth HT y012319 to 44 Teeth FG 6432/220 to 44 Teeth FG 643321 to 44 Teeth HT y1935820 to 42 Teeth HT y090421 to 42 Teeth FG 7431/2122 to 42 Teeth FG 743121 to 40 Teeth FG 7432/2122 to 40 Teeth FG 7432/2223 to 40 Teeth FG 7432/2324 to 40 Teeth FG 743225 to 40 Teeth FG 7432/2526 to 40 Teeth HT y1936426 to 38 Teeth FG 7433Contents:1 piece

€29.90*

Configure now

HT-Steel pinions for Carson / Smartech 2WD offroad cars

Genuine rc-car-online spare/option part. The pinions are made from nitrited steel. The do all correspond with the standard main gear and are secured using two grubscrews.These pinions are profile regraded and have all the same diameter!Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€29.90*

Configure now

2012-108 Mecatech Zahnrad Z64

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

E540004 UFRC Chassis protector

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€49.90*

Bearing plate for brake cam Baja premium brake, 2 pcs., y0004

€7.10*

HB0004, Hurrax Brake cam, SS, 1 pce.

Diameter 6 mmLength 88 mmThreaded holes M3

€7.98* €15.95* (49.97% saved)

LOS350004 Losi L/R Rear Fender Set, Clear, Super Baja Rey

Genuine Losi spare/option part. Contents:2 pieces

€59.99*

TLR256007 TLR External Tooth Lock Washer M3

Genuine TLR spare/option part.Contents:10 piecest

€4.99*

y0266 HT-Differential ring gear, fine pitch, 69Teeth

Genuine HT spare/option part.Fine pitch gears for layshaft and differential, for competition use in touring car and GT models only. The gears run smoother and quieter than the stock parts, reducing the car's rolling resistance.Fits FG and Smartech / Carson cars. Only for use with the fine pitch pinion! Module: m=1.Contents:1 piece [INCLUDE]profilverschoben[ENDINCLUDE]

€49.90*

y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft

This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.

€89.90*

y0190/48 HT-Alloy carrier with steel spur gear 48T for the layshaft

€89.90*

y0692 HT-Gearset for layshaft and differential fine pitch for 1/5 onroad

Genuine HT spare/option part.Fine pitch gears for layshaft and differential, for competition use in touring car and GT models only. The gears run smoother and quieter than the stock parts, reducing the car's rolling resistance.Module: m=1Fits FG and Smartech / Carson cars. Only for use as a set, not in combination with standard pitch gears!Contents:2 pieces

€79.90*

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft

Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*

Configure now

y1072 HT Alloy differential spur gear protector

Genuine HT spare/option part.Gear protector for the bottom of the 2WD chassis plate. Replaces stock plastic part FG 6082 or Carson 32481.Contents:1 piece

€29.90*

6082 FG Gearwheel cover

Genuine FG spare/option part.Suitable for all FG Off-Road chassis 2 WD except Leopard.Protects the differential spur gear.Contents:1 piece

€9.50*

6490 FG Alloy spur gear adaptor

Item N°6490 Alloy spur gear adaptorLength 26.5 mmBore 10 mmBolt circle for spur gear 3 x 35 mm, M5 thread

€41.90*

6050 FG Plastic gear carrier 60 mm

Genuine FG spare/option part. Plastic version, 60 mm diameter. For 48T - 46T spur gears.Also available in aluminum .Content:1 piece

€12.50*

7439/06 FG Alloy gear carrier

Genuine FG spare/option part. ClutchGear shaft outerGear shaft innerDifferentialReduction ratio345823735,41345823745,49345824735,19345824745,26355823735,26355823745,33355824735,04355824745,11365823735,11365823745,18365824734,90365824744,97375823734,98375823745,04375824734,77375824744,84Contents:1 piece

€45.90*

6048/03 FG Secondary crown gear 74 Teeth

€56.90*

10639 FG Gear drive for F1 Competition, set

During the past years engines and tires became stronger and so the belt drive's power transfer capabilities where no longer up to the task. Therefore we developed the gear drive which has what it takes to reliably keep up with even the strongest engines for years to come.A further advantage is the smoothness of the gear drive compared to the belt, which reduces overall drag significantly.The set includes all necessary parts to convert the FG Formula 1 Competition to gear drive.

€524.95*

7427 FG Plastic gearwheel 40 teeth

Genuine FG spare/option part.Suitable for all 1:5 models.Dimensions:Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Contents:1 piece

€17.90*

B65010 Gear shaft

Contents:1 piece

€44.90*

241 products found for "zahn_0004"

Filter products

rc-car-online - Home