11 products found for "y1375"

rc-car-online - Home

y1375 SPEED TEC Off-Road Tuning insulator 26 mm angled for Zenoah G320

Genuine Speed-Tec spare/option part. SPEED TEC tuning insulator 26 mm for RC320, angled. Especially for 1/5 & 1/6 offroad cars The angled version is required for many offroad cars when installing a taller insulator and for HPI Baja series cars as well. The material components of this high quality engineering plastic, with an extremely high melting point of 280° C, guarantee optimal heat dissipation. Unlike the original insulator, this allows for a much better thermal insulation of the carburetor and therefore prevents fuel vapor lock in the carburetor at high ambient temperatures! The leaning of the engine at higher temperatures is counteracted! The increased height and optimized port allows for lower fuel consumption! 60% glass fiber content of the SPEED TEC tuning insulator makes for strong mounting threads, providing a sturdy base for the usual airboxes or large off-road air filters which are common in competition applications. Please notice: the cylinder shroud y1016/021 must be reworked for angled tuning insulator! Kit includes: 1 x insulator 18 mm or 26 mm 2 x allen head steel screws M5x16 2 x M5 serrated washers Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 19015 Bindulin Siliconey0994 Marston sealery0807 MD-Sil RTV silicone sealer

€39.90*

y1175 Audi TT vehicle decals

Genuine HT spare/option part. The car set includes lights, grille and so on. Dimensions: 480 x 230 mmContents:2 pieces

€24.90*

y1379 Pinion fastening set with nut for Losi 5ive-T/2.0 and Mini

This set allows for fastening the pinion to the clutch bell utilizing a full metal self locking nut when using our gas-nitrided clutch bell y0726. The screw will be fully inserted into the clutch bell from the backside using high strength thread locking compound. This setup provides a couple of significant advantages:This self locking nut does not use the usual plastic insert; therefore it is completely temperature resistant!Theres no need to wait for the thread locking compound to cure after a pinion change; the connection is safe and ready to use immediately. For safety reasons nut and spring lock washers should only be used once.No need to worry about worn-out Allen screw heads.In case the screw ever breaks at the point where it enters the pinion, it can still be removed with ordinary tools. Theres still the like new screw head inside the clutch bell ready for screw removal. Set includes:2 pieces of high strength 12.9 grade screws10 pieces of full metal self locking nuts10 pieces of spring lock washers

€5.90*

y1475 Special front hinge pin brace set for Losi Mini

Genuine HT spare/option part.These hinge pin braces are machined from 7075 aluminum and feature an increased distance between the holes for the hinge pins. They are to be used in place of stock braces LOSB 078F.This allows the use of the front center drive shaft from the 5ive-T LOSB3218 at the wheels. This one is slightly longer than the Mini shaft for the wheels LOS252000, but will be available as spare part in the future. The turnbuckles on steering rods and camber links need some minor readjusting after assembly to restore the correct geometry.At the rear LOSB3218 driveshafts will fit the Mini without modifications. Set with one each front and rear hinge pin brace.Contents:1 set

€9.90* €24.90* (60.24% saved)

y1371 SPEED TEC CRANK race ported top end set G320

Race ported top end set for Zenoah G320 engine. The SPEED TEC CRANK genuine Zenoah G320 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina.SPEED TEC CRANK version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledMachined and polished exhaust and intakeThe case is specially matched with enlarged and polished cross section towards the portsy1016/002+3T Tuning transfer port covers:Reduced cross-section and flow-optimized transfer port cover plates for improved and faster gas flow for the Zenoah G320. The improved gas flow rate improves speed and gives faster throttle response in the medium rpm range. To improve mixture formation, the plates were glass bead blasted after machining. Piston: Weight reducedSkirt shortenedOil ringsPiston above and below piston ring tapered and piston dome polishedSet includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipThrust washer for needle bearingCover for transfer portTo achieve the optimum performance gain of a SPEED TEC CRANK top end set, we recommend the use of a tuned pipe ().

€329.90*

y1370 SPEED TEC EXPERT Zenoah G320 race ported top end set

Race ported top end set for Zenoah G320 engine.The SPEED TEC EXPERT genuine Zenoah G320 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledModified exhaust and intakeTransfer port covers:Glued and ready for use Piston: Weight reducedSkirt shortenedOil ringsPiston above and below piston ring tapered and piston dome groundSet includes the following parts: CylinderPistonPiston ringCylinder foot gasketPiston pinPiston pin clipThrust washer for needle bearingCover for transfer portTo achieve the optimum performance gain of a SPEED TEC EXPERT top end set, we recommend the use of a tuned pipe ().

€289.90*

y1376 Full set of gaskets for Zenoah G240, G270, G290, and 4-Bolt CY engines

Full set of gaskets for Zenoah G40, G270, G290, and 4-Bolt CY engines.Set includes:0.4 mm cylinder gasket (Zenoah stock thickness!)1 mm exhaust gasket0.5 mm crankcase gasket0.5 mm isolator gasket0.5 mm carburetor gasket

€12.90*

y1075 Front brake system for FG Marder, FG Off-Road Buggy and for Carson / Smartech 2WD offroad cars incl. uprights, bearings and axles

Complete pre-assembled set front disc brakes for FG Marder, FG Off-Road Buggy and for Carson / Smartech Attack / Comanche / UNO / Monster Truck / CRT / CPT / Super Attack / Evo Attack / Spider / Big Attack , fits Conrad Big Pyro as well.For mounting in a Gas Blaster you must change you front shock mount and the front body shell holder, look at the pictures. Includes:- brake system with linkage- uprights- bearings- longer axle shafts- wider square drivesNo additional parts needed.

€179.90*

y1345 Drive pins, choice of sizes, e.g. for Losi, Mini and HPI cars

y1345 Size: y1345/01 - 4 x 18 mm

Genuine HT spare/option part. Hardened pins made of 100Cr6 steel for driveshafts, differentials, wheel drives and similar applications. Pack of ten. Sizes available:y1345/01: 4 x 18 mm, e.g. for Losi 5ive-T/Mini and HPI Baja differentials or HPI Baja layshafty1345/02: 4 x 20 mm, e.g. for Losi 5ive-T/Mini CVD jointsy1345/03: 4 x 24 mm, e.g. for Losi DBXL and HPI Baja wheel hexy1345/04: 5 x 24 mm, e.g. for Losi 5ive-T/Mini wheel hexContents:10 pieces

€4.90*

y1373/06 Replacement o-ring for SPEED TEC Racing Airbox

Genuine Spped-Tec spare/option part. Spare Part for SPEED TEC Racing Airbox.Contents:2 pieces

€4.90*

y1379/01 Refill pack full metal self locking nuts and spring lock washers

Refill pack for y1379. Set includes:20 pieces of full metal self locking nuts20 pieces of spring lock washers

€5.90*

11 products found for "y1375"

Filter products

rc-car-online - Home