14 products found for "y0916"

rc-car-online - Home

y0916 Original Zenoah G290 rebuild kit, set

Rebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G290Piston G290Piston ring G290Piston pin G290Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€94.90*

y0915 Original Zenoah G270 rebuild kit, set

Rebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€84.90*

y0116 nitrided hardened Steel pinion with 14 to 48 teeth

Nitrided hardened, highly wear-resistant.Attention: not suitable for 1/6 scale Smartech / Carson 2WD Off-Road models. (Link to the Carson Smartech pinions: here)For use on the clutch bell of FG cars in combination with a 48t spur gear on the layshaft. Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Contents:1 piece

€29.90*

y0616 rc-car-online Race Cap, 1 pce.

y0616 rc-car-online Race Cap, 1 pce.With rc-car logo on front and back. 100% cotton; with adjustable brass buckle to fit every head size. First class quality and workmanship.

€7.90*

y0914 Original Zenoah G240 rebuild kit, set

Rebuild kit for the Zenoah G240 engine to replace parts. The kit includes the following parts:Cylinder G240Piston G240Piston ring G240Piston pin G240Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*

y0913 Original Zenoah G260 rebuild kit fits too CY, Losi and HPI engines, set

Rebuild kit for the Zenoah G260/04 engine to replace piston/cylinder related parts, fits the previous G260 engines as well. The kit includes the following parts:Cylinder G260Piston G260Piston ring G260Piston bolt G260Piston pin retainer clipsCylinder gasketThis kit can also be installed on CY26, HPI and Losi engines, but you have to use Zenoah needle bearing 7312 and spacer washers 7312/0 for this application! Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0961 FG manuals set all 2WD monster + stadium cars except Monster Beetle, set

Genuine FG manuals as included with the cars.

€3.90*

y0816 Motul Shine&Go

Genuine Motul spare/option part. Motul Shine&Go, a silicone based care for all metal and plastic parts. Protects the surfaces with a long term non-stick protective film, helping to prevent dirt, grime, tire rubber and dust from adhering. Once applied after cleaning the model, dirt can be removed much easier next time.Contents:1 piece

Content: 400 Milliliter (€32.25* / 1000 Milliliter)

€12.90*

y0416 Hobbythek failsafe module

Genuine HT spare/option part.Failsafe unit with adjustable servo position, very low current drain (0.05mA). Excellent value for money!Attention: not compatible with digital servos!Contents:1 piece

€29.90*

y0196 Cask-shaped springs for 16 mm Shocks

ha_0050 Version: y0196/F15 - Orange/black

Genuine HT spare/option part. Available in several versions. The springs are suitable for shocks with 16 mm diameter.For the front axle:order no.:Wire size/Length:Color:y0196/F12,4 x 48 mmyellowy0196/F22,5 x 48 mmorangey0196/F32,6 x 48 mmredy0196/F42,7 x 48 mmpurpley0196/F52,8 x 48 mmblueFor the rear axle:Order no.:Wire size/Length:Color:y0196/F122,4 x 55 mmyellowy0196/F132,8 x 55 mmorangey0196/F142,5 x 55 mmbluey0196/F152,6 x 55 mmorange / black stripey0196/F162,3 x 55 mmredOil recommendation for genuine Evo shocks:viskosity 3000 for cold weather viskosity 4000 for hot weatherContents:2 pieces

€17.90*

y0910 Hörmann / Mammoth Jumbo foam inserts

Fits Mammoth and Hörmann Jumbo tires on FG rims with extension ring only. Priced per pair.

€9.90*

y0906 HT Monster / Stadium alloy front suspension kit 2WD - 1pce.

Alloy front axle kit for FG Monster and Stadium 2WD models. Complete kit with all necessary parts. A-arms and bulkheads feature replaceable bushings, shock stay, shock quick mounts, balljoints, and droop stop.Fits FG Monster and Stadium 2WD models.All components are available separately.Quantity Order N° Kind 2 pieces 18000 A-arm front upper 2 pieces 18001/l+r A-arm front lower 2 pieces 18006 Front bulkhead 1 piece 18004 Shock tower2 pieces 18003Shock mounts4 piece 18005 Absorber quick mounts1 piece 18007 Suspension travel limiter2 pieces y1036 Rose jointsThe price of those parts bought separately would be 451,80 EURIf you want to install front cable brakes, we recommend the brake cable bracket below.

€379.00* €451.80* (16.11% saved)

y0976 Alloy shock shaft end, long or short to choice

y0976 Version: y7087/02 - Long+ 1EUR

y7087/01 Alloy shock shaft end shortReplaces FG 7087/01.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.Dimensions:Length overall: 22,5 mm, about 17 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 piecesy7087/02 Alloy shock shaft end longGenuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

Variants from €14.90*

€15.90*

ARA310916 ARRMA Diff inserts for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:4 pieces

€19.99*

14 products found for "y0916"

Filter products

rc-car-online - Home