14 products found for "y0914"

rc-car-online - Home

y0904 nitrided hardened Steel pinion with 20 to 42 teeth width

Nitrided hardened, highly wear-resistant.Not suitable for Smartech and Carson models. Suitable for FG offroad models 2WD on the clutch bell to the 42 main gear. This pinion is profile shifted and has a 1.5 module. This means that the number of teeth of the gear is changed compared to the previously known values while the diameter remains the same. The area of the involute curve that determines the tooth profile is shifted. Positively shifted gears (fewer teeth than normal) are more stable and run more smoothly; the slightly lower strength of negatively shifted gears is irrelevant. 1 piece

€29.90*

y0914 Original Zenoah G240 rebuild kit, set

Rebuild kit for the Zenoah G240 engine to replace parts. The kit includes the following parts:Cylinder G240Piston G240Piston ring G240Piston pin G240Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*

y0994 Marston heat-proof sealer - 1pce.

Marston Universal blue is the leading non-setting gasket and sealing compound in use world-wide. The product is used by many of the world?s major automotive manufacturers and by several Formula 1 teams.Features- Non hardening and non setting- Unlimited assembly time- Vibration resistant- Allows metal to metal contact- Resistant to combustion products, water, engine coolant, petroleum, lubricating oils, kerosene and fluorocarbon refrigerants- Seals surface imperfections- Withstands rapid variations in temperature80 ml tube

Content: 80 Milliliter (€123.75* / 1000 Milliliter)

€9.90*

y0916 Original Zenoah G290 rebuild kit, set

Rebuild kit for the Zenoah G290 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G290Piston G290Piston ring G290Piston pin G290Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€94.90*

y0915 Original Zenoah G270 rebuild kit, set

Rebuild kit for the Zenoah G270 engine to replace piston/cylinder related parts. The kit includes the following parts:Cylinder G270Piston G270Piston ring G270Piston pin G270Piston pin retainer clipsCylinder gasketPlease note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€84.90*

Linkage rod Baja premium brake, 1 pce., y0014

€1.00*

y0941 HT-Alloy a-arm for Carson Gas Devil / Smartech Titan, front upper

Genuine HT spare/option part. Front lower a-arm, replaceable plastic bushings, one version, identical for l/h and r/h applications.Surface deburred with vibratory grinder.Contents:1 piece

€39.90*

y0714 Alloy pinion 19 tooth, hard anodized, for Carson/Smartech 1/6 scale offroad - 1pce.

Item N° y0714 Alloy pinion 19 tooth, hard anodized, for Carson/Smartech 1/6 scale offroad - 1pce.Very low weight hard anodized 19T alloy pinion, for use with the stock 48T spur gear on 1/6 scale 2WD off-road cars from Carson/Smartech/Nutech a.s.o.Diameter 31,6 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€27.90*

y0913 Original Zenoah G260 rebuild kit fits too CY, Losi and HPI engines, set

Rebuild kit for the Zenoah G260/04 engine to replace piston/cylinder related parts, fits the previous G260 engines as well. The kit includes the following parts:Cylinder G260Piston G260Piston ring G260Piston bolt G260Piston pin retainer clipsCylinder gasketThis kit can also be installed on CY26, HPI and Losi engines, but you have to use Zenoah needle bearing 7312 and spacer washers 7312/0 for this application! Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€79.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0314 Electronic high current receiver switch

schalter_elektronisch Battery connector: y0314/02 FG connector+ 5EUR

Genuine HT spare/option part.Electronic receiver switch, rated 5 A continuous / 15 A peak. This switch does not use mechanical contacts for the load, therefore it is less prone to failure caused by vibrations or dirt.The swith uses two separate connectors to distribute the load at the receiver terminals.With drilling template and mounting material.Contents:1 piece

Variants from €39.90*

€44.90*

y0910 Hörmann / Mammoth Jumbo foam inserts

Fits Mammoth and Hörmann Jumbo tires on FG rims with extension ring only. Priced per pair.

€9.90*

y0514 GPM Shock-Cover for FG, Carson, Smartech, Conrad, set.

These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Not suitable for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all dampers with a diameter from 22 to 30 mm. Set of 4

€14.90*

World Championship Touring Cars 2007, Two Blu-Ray disc set, y0934

This two disc DVD set of the World Championship in Brisbane / Australia in 2007, made by Chris Wright from the well known Rev-Up racing magazine.The 2007 Worlds in Brisbane, Australia finished less than a month ago and Chris Wright has worked hard to get these DVD?s out to you. Have a look at the trailer, but altogether you get 17 videos plus on the second DVD in the EXTRAS directory you will find the full race results in html so you can surf the whole event in your browser. Not content with that also in the extras directory are all the still pictures taken. There are a few hundred pictures here and if your car is not there then it was not through want of trying on our part. These pictures can be printed or used as wallpaper on your computer or even your phone. Titles like 30 minutes of glorious slow motion, the full final with commentary, opening concourse, a view of Brisbane some of it from the air, the two prize presentations - on the track and at the Banquet, lots of other videos as you would expect and a bonus video of our day at Steve Urwin's amazing wildlife park, stroking crocodiles, cuddling Koalas and a Tiger that wanted to like the camera lens, Crikey! It is all there.The DVD?s are in PAL so if you have a TV region in NTSC then you will need to play them on your computer. As the original files started life as high definition and if you play them on a DVD player that upscale?s through HDMI or Component leads, then you will see an improvement in the video quality. Not HD but possibly middle of the road.Trailer:This will be for the moment on Blu Ray DVD discs as Toshiba have yet (after ten months) to release their HD DVD Burner drive. I have tried a few authoring programs and as it is early days they all have their problems so the easy way is to provide the original files for people to select and play. These discs ?may? work in ?some? set top players but as Sony has just upgraded the firmware on set top boxes if yours cannot be updated then you may not be able to play them. However, as the vast majority of Blu Ray players are the much cheaper PlayStation3 (which is even cheaper now the 40 gig cut down version has just been released) these discs will play in all versions. So provided you are feeding your PS3 through an HDMI interface to as a minimum HD ready TV or better still a Full 1080P TV (these files are rendered in 1080P ) you will get the WOW factor. There is a read-me file on the DVD explaining all this.What do you need to get the most out of it? You have to have a desktop/laptop that is connected to a High Def Screen or Monitor of 1920 x 1080 resolution. We also assume you have the processing power of the fastest single Pentium or a Dual Core processor (Intel or AMD), ram of 1 gig + and at least a DirectX 9 or even DirectX10 graphic card with at least 256 meg of dedicated memory on it. You also need a Blu-Ray player or read/writer (The LG one is the cheapest). Assuming under Windows XP you have Service Pack 2 installed then you should be on Windows Media 10. Under Vista you must have at least the Home Premium version or higher installed and this will give you the latest Direct X 10 drivers and Windows Media 11. Your first job is to run the NEO Player provided free on this disc. This installs the free High Definition codec in order that Win Media players these files in the correct way or Power DVD if you are using this popular player. (There is a ?read me? file on the Blu-Ray disc explaining this).Of course if you also have a DVI or HDMI 1.2 or 1.3 interface off your computer then connect it to your High Def TV and get that WOW! experience.

€28.50* €57.00* (50% saved)

ARA310914 ARRMA Diff Internal Gear Set for Kraton / Outcast 8S

Genuine ARRMA spare/option part. Contents:1 set

€26.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

14 products found for "y0914"

Filter products

rc-car-online - Home