18 products found for "y0673"

rc-car-online - Home

y0673 Carbon fastening strip for FG no. 8418 - 2 pcs.

Use instead of plastic fastening strip FG # 8418/07 (for FG front bumper # 8418).Dimensions:Width: 95,7 mmHeight: 16,8 mmDistance between holes: 75 mmBore diameter: 8 mmThickness: 2 mm

€19.80*

y0273 Opel Vectra team decals Valvoline - set

Valvoline team decals for Opel Vectra body shell.Sheet dimensions:500 x 230 mm (3x)230 x 80 mm

€29.00*

y0670 HT Color Ex color remover 100 ml

Special remover for Lexan (Polycarbonate) and for X- and XF-color, AS- and TS-color and many more painting system until 2-K color. Does not damage the body shell!For small corrections soak a cotton swap with Color ex. Use a lint-free cloth for large area applications.Color Ex comes in a glas bottle with child-proof bottle top.Contents:100 ml / 1 piece

Content: 100 Milliliter (€99.50* / 1000 Milliliter)

€9.95*

y0643 Hose clamp 50 - 75 mm, 2 pcs.

Item N°: y0643 Hose clamp 50 - 75 mm, 2 pcs.Is need for mounting for tuning pipes for example.Clamping range 50 - 75 mm.

€5.90*

y0623 Supergrip C6 wheels on rims chrom

Off-Road tires mounted and glued on rims, on chrome rims. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Dimensions:Diameter: 150 mmWidth: 60 mmWheel square: 18 mmContents:4 pieces / 2 pairs

€59.90*

y0677 Body set BMW M3 ALMS Team Jägermeister, painted for 530/535 wheelbase

The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan. This body shell comes without pre-drilled mounting holes, it can be installed on all FG standard width touring car chassis' with 535 mm wheelbase, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase.Set contains:FG 8180 Body shell set BMW M3 ALMS - 219,95 EURFG 8185/01 Vehicle decals BMW M3 ALMS - 50,50 EURy0683 Large Jägermeister decals - 29,90 EURSurcharge Jägermeister painting + glueing the decals - 195,90 EURRegular price: 496,25 EURThe set is delivered as shown.Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeight: 260 mmWheelbase: 530 mm

€269.90*

y0473 Needle roller bearings with centring washers for 29 / 30.5 cm³ Big Bore Kit, 1 set

Spare part for the 29 / 30.5 cc big bore kit y0466

€9.90*

y0672 Painted Audi A4 DTM team Jägermeister body shell

Genuine HT spare/option part. Fits chassis with 535 mm wheelbase, standard touring car width. Set of flaps included. The body shell is vac-formed from 2 mm Lexan.This body shell comes without pre-drilled mounting holes, it can be installed on all FG standard width touring car chassis' with 530/535 mm wheelbase.Set contains:FG 4149 Body shell A4: 180,-- EURFG 4153/01 Car decals: 24,90 EURFG 4153/02 Window masking: 6,55 EURy0683 Big decals Jägermeister: 22,90 EURSurcharge Jägermeister painting + glueing the decals: 163,20 EURRegular price: 397,55 EURRequired body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 935 mmWidth: 392 mmHeight: 240 mmWheelbase: 530 mmContents:1 piece

€279.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0671 Body set BMW 320si WTCC team Jägermeister, painted

Genuine HT spare/option part. Bodies as shown on the picture, already painted and with applied decals. The wing attachment parts and the rear wing are enclosed. The body detail kits as mirrors, windscreen wipers etc. are not included.The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm/ul>Contents:1 piece

€269.90*

y0674 Cable ties black 2,5 x 100 mm, 100 pcs.

Genuine HT spare/option part. Cable tie for one time tightening / sealing / fastening. For example on drive shaft boots, fuel hoses, brake lines and many more.Size: 2.5 x 100 mmHolding strength: 8.1 kgTemperature range: -40°C to +85°CContents:1 piece

€5.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0675 Receiver battery pack 5000 mAh Ni-Mh - 1pce.

y0675 Connector: y0675/01 FG connector

Item N° y0675 Receiver battery pack 5000 mAh Ni-Mh - 1pce.Double-block special battery pack, 6 volt / 5000 mAh, with FG or universal connector.Dimensions: approx. 72 x 53 x 29 mmConnector:UniversalFGEspecially designed for the high current demand in FG 4WD cars NiMh battery pack, fits the stock battery tray.Can be used for FG Evo cars and Competition cars as well.The Sanyo eneloop cell eliminates the annoying problem that a charged battery has often lost a high percentage of its storage capacity after just one week. Also, the differences between individual cells in a pack are sometimes significant, reducing the life and performance of the complete pack. Compared to "normal" NiMh cells the Sanyo eneloop cell has a slightly lower capacity and a slightly higher price (in relationship to its capacity), but you get significant advantages in return. With the recently available improved version of the 2005 introduced and widely acclaimed eneloop cell self-discharge for rc-car related time frames is now more or less nonexistent. One could easily charge the cells at New Year?s Eve and use them at Christmas without noticing a significant loss of capacity. Sanyo eneloop cells show a considerably reduced tendency to failure of individual cells in a battery pack. Even after years eneloop cells usually differ by only a few percent. The voltage of the cells is also slightly higher than with normal NiMh cells, so that more volts are available under load. Especially when used in largescale cars with their usually extremely strong servos, this is a particularly important feature! Chargers which are suitable for NiMh cells will also work for eneloop cells. The basic features of the eneloop XX version are similar to the standard version, but here the priorities were set slightly different. At the expense of reduced (but easy to cope with for rc-car usage) values for load cycles and self-discharge, capacity could be increased by 25%.- Nominal capacity: 2500 mAh- Maximum number of charge cycles: 500- self-discharge: 25% at 1 yearYou can differentiate the two generations of eneloop cells by checking the model name which is written on each eneloop. The "old" cells have written HR-3UTG (AA) on them, the improved eneloop instead HR-3UTGA (AA)!

€74.90*

y0683 Large Jaegermeister team decal sheet 420 x 270 mm

y0683 Version: Original film

Genuine HT spare/option part. Dimensions Jägermeister Logo:1 x 170 mm diameter1 x 90 mm diameter4 x 50 mm diameterDimensions Jägermeister lettering:1 x 250 mm width, 4 x 210 mm width,1 x 130 mm width, 2 x 60 mm width, Dimensions Dezent lettering 4x 110 mm width Total dimensions: Width: 490 mm Height: 420 mmIn the shopping cart selection of this large Jägermeister team decal sheet,this is also available in a with an extra charge under item number y0683/01high-quality opaque screen print version, available on a special film.This decor set is especially for decorating on dark Body colors suitable.Contents:1 piece

€29.90*

y0693 Extreme-Duty spur gear for FG, Smartech / Carson Offroad 2WD

y0693 Teeth: 13 teeth for offroad

Genuine HT spare/option part.Extreme duty gears for largescale offroaders and monster trucks. Set of coarse pitch pinion for the layshaft and corresponding differential spur gear, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Module: m=1,75To keep the original gearing the set is available with 12 teeth pinion for Monster Truck & Co. or 13 teeth pinion for all other off-roaders with standard sized tires.The differential spur gear has 41 teeth. Please tell us your choice!Fits FG 2WD cars and Carson Attack/Firehammer/Smartech Traveller, Carson Comanche, Touareg a.s.o. The gears have diameters like standard units.Contents:2 pieces [INCLUDE]profilverschoben[ENDINCLUDE]

€79.90*

y0663 Sanyo eneloop XX receiver battery 2500 mAh NiMh, 1 pce.

y0663 Connector: y0663/02 Futaba, JR, MPX universal

Item N° y0663Sanyo eneloop XX receiver battery 2500 mAh NiMh, 1 pce.Informations about eneloop cells:eneloop XXThe Sanyo eneloop cell eliminates the annoying problem that a charged battery has often lost a high percentage of its storage capacity after just one week. Also, the differences between individual cells in a pack are sometimes significant, reducing the life and performance of the complete pack. Compared to "normal" NiMh cells the Sanyo eneloop cell has a slightly lower capacity and a slightly higher price (in relationship to its capacity), but you get significant advantages in return. With the recently available improved version of the 2005 introduced and widely acclaimed eneloop cell self-discharge for rc-car related time frames is now more or less nonexistent. One could easily charge the cells at New Year?s Eve and use them at Christmas without noticing a significant loss of capacity. Sanyo eneloop cells show a considerably reduced tendency to failure of individual cells in a battery pack. Even after years eneloop cells usually differ by only a few percent. The voltage of the cells is also slightly higher than with normal NiMh cells, so that more volts are available under load. Especially when used in largescale cars with their usually extremely strong servos, this is a particularly important feature! Chargers which are suitable for NiMh cells will also work for eneloop cells. UniversalFGBECHigh currentThe basic features of the eneloop XX version are similar to the standard version, but here the priorities were set slightly different. At the expense of reduced (but easy to cope with for rc-car usage) values for load cycles and self-discharge, capacity could be increased by 25%.- Nominal capacity: 2500 mAh- Maximum number of charge cycles: 500- For cars with up to 3 servos- self-discharge: 25% at 1 yearYou can differentiate the two generations of eneloop cells by checking the model name which is written on each eneloop. The "old" cells have written HR-3UTG (AA) on them, the improved eneloop instead HR-3UTGA (AA)!

€39.90*

y0674/04 Cable ties with steel tongue 2,5 x 200 mm

Cable tie for one time tightening / sealing / fastening. For example on drive shaft boots, fuel hoses, brake lines and many more.With steel tongue for infinite adjustment and increased holding power. Especially for high demand applications.Size: 2.5 x 200 mmTemperature range: -40°C to +85°CContent: 20 pieces

€5.90*

y0674/03 Cable ties white 4,8 x 530 mm, 20 pcs.

Genuine HT spare/option part.Cable tie for one time tightening / sealing / fastening. For example on drive shaft boots, fuel hoses, brake lines and many more.Specification:Size: 4,8 x 530 mmHolding strength: 25,8 kgTemperature range: -40°C to +85°CContents:20 piece

€5.90*

y0674/01 Cable ties black 2,5 x 140 mm, 100 pcs.

Genuine HT spare/option part. Cable tie for one time tightening / sealing / fastening. For example on drive shaft boots, fuel hoses, brake lines and many more.Specification:Size: 2,5 x 140 mmHolding strength: 18 kgTemperature range: -40°C to +85°CContents:100 piece

€5.90*

y0674/02 Cable ties black 4,8 x 360 mm, 50 pcs.

Genuine HT spare/option part. Cable tie for one time tightening / sealing / fastening. For example on drive shaft boots, fuel hoses, brake lines and many more.Specification:Size: 4,8x 360 mmHolding strength: 22 kgTemperature range: -40°C to +85°CContents:50 piece

€5.90*

18 products found for "y0673"

Filter products

rc-car-online - Home