2012-09 Mecatech Front Bumper Foam
€15.00
Available
Product information "2012-09 Mecatech Front Bumper Foam"
Content:
- 1 piece
Login
Accessories / Spare parts
Spare part for .Length: 107 mmWidth: 410 mmHeight: 50 mm
Item N° 8418 Foam front bumper 1:5 - setThe foam of this bumper set can be easily removed upwards through dismounting the body clips. Suitable for all 1:5 models. The foam can be adapted to all front bodies through cutting.Length: 110 mmWidth: 410 mmHeight: 55 mm
Spare part for .Length 59 mmWidth 264 mm
Genuine FG spare/option part. Adjustable body mount with heigt-adjustable body support.Dimensions:Length: 55 mmDiameter: 8 mmThe Base: 10 mmFor all cars and body shells.Contents:1 piece
Alternatives
Spare part for .Length: 107 mmWidth: 410 mmHeight: 50 mm
Item N° 8418 Foam front bumper 1:5 - setThe foam of this bumper set can be easily removed upwards through dismounting the body clips. Suitable for all 1:5 models. The foam can be adapted to all front bodies through cutting.Length: 110 mmWidth: 410 mmHeight: 55 mm
Customers also bought
Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!
Genuine Mecatech spare/option part for the FW01.Content:6 pieces
Genuine Mecatech spare/option part for the FW01.Content:4 pieces
Genuine Mecatech spare/option part for the FW01.Content:4 pieces
PMT tire chart from the current series divided into 3 categories 1) Parking lot / hobbyThe durability of the tire is the main focus here.2) Race track / hobbyHere you will find the tire that offers a compromise of durability and performance.3) Race track / competitionHere the racer will find the tires for best lap times on a race track and to win races.Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Genuine PMT spare/option part.Currently the most indispensable rain tire!The PMT Supreme R400 has the maximum as posible grip at slighlty damp to drying race track.Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable. Dimension: Outside diameter: approx. 116 mm Width: approx. 65 mm Rims: 18 mm square driveContents:1 pair / 2 pieces
Genuine Mielke spare/option part.Clutch shoes for Mielke Power Gearshift II clutches part numbers 5640, 5641 and 5642.Content:3 Pieces
Customers also viewed
Genuine Mecatech spare/option part for the FW01.Content:1 Set
Item N° 8418 Foam front bumper 1:5 - setThe foam of this bumper set can be easily removed upwards through dismounting the body clips. Suitable for all 1:5 models. The foam can be adapted to all front bodies through cutting.Length: 110 mmWidth: 410 mmHeight: 55 mm
Spare part for .Length: 107 mmWidth: 410 mmHeight: 50 mm
Genuine Mecatech spare/option part for the FW01.Attention:does only fit the chassis plate with corresponding cut-outs and mounting provision!Content:2 pieces
Genuine Mecatech spare/option part. Dimensions:Length: 66 cmHeight: 35 cmWidth: 35 cmContents:1 piece
Genuine Mecatech spare/option part for the FW01.Content:10 pieces
Genuine Mecatech spare/option part for the FW01.Attention:does only fit the chassis plate with corresponding cut-outs and mounting provision!Content:2 pieces