8456/05 FG Competition brake lining, 2 pcs.

€29.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8456_05

EAN: 3410564521816

Product information "8456/05 FG Competition brake lining, 2 pcs."

Suitable for alloy brake caliper, high stopping power.

With glued pads.

Measures:

Length approx. 50 mm
Width approx. 10 mm
Thickness approx. 3.8 mm
Mounting hole distance 40 mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y1337 Epoxy P-R-M Race brake discs for FG / Smartech / Carson

Top quality epoxy P-R-M Race brake discs with 10 dirt slots for removing dirt and abrasion, which will be transferred to the outside by the discs rotation. The epoxy P-R-M Race brake disc provides an optimal deceleration of the car without the unwanted fading (poor braking performance due to increased heat buildup)! The best braking action when using the epoxy P-R-M Race brake disc is achieved by the combination of the epoxy brake discs and steel brake pads (8456 or y19218). The epoxy P-R-M Race brake discs fit mechanical front and rear brakes on FG / Smartech / Carson cars with brake pads 8456 recommended for these applications.1 pair (2 pieces) Dimensions: Outer diameter: 60 mm Thickness: 2 mmsocket for 18 mm square wheel drive

€22.90*

8456 FG Steel brake pads - 2pcs.

Suitable for all mechanical disk brakes.

€9.90*

8456/01 FG Alloy brake pads 97 - 2 pce.

Suitable for all mechanical disk brakes.

€10.90*

8457/03 FG Competition brake lining glued for FG and HPI disc brakes

Genuine FG spare/option part. New competition brake lining with good braking characteristics and low wear. Glued on a steel plate.Spare part for: 6250/05, 6250/06, 8450/05, 8452/05, 10452, 10453 and y0056 HT - Baja 5B/SS premium front disk brake.Measures:Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mmContents:4 pieces

€44.50*

8458/02 FG Tuning Brake disk lasered

Spare part for , , , , and .Diameter 60 mm18 mm squareContent:2 pieces

€45.90*

TLR252011 TLR Brake Disc, Pad and Screw Set 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-BContents:1 set

€89.99*

s054320, Smartech tuning brake Gas/Hell Devil/CRT 4x4/Thunderbolt / Titan, set

Set includes 2 rotors, 4 brake pads and 4 return springs. The steel rotors will last significantly longer on the differential drive cups, wear between rotors and brake pads is reduced as well.

€49.90*

Tuning brake pads y0050 for mechanical FG brake, 4 piece set

uning brake pad set, 4 pieces for steel brake discs. Suitable for all mechanical wheel brakes from FG and HPI y0056 to significantly increase the braking force. Set contains 4 brake pads.

€49.90*

8457/02 FG Brake lining glued front/rear standard - 4pcs.

Affordable standard brake lining with good braking deceleration. Glued on a steel plate. Spare part for , , , , and .Length approx. 50 mmWidth approx. 10 mmThickness approx. 5.5 mmMounting hole distance 40 mm

€39.95*

AREA-BJ029/16 Special screw

Genuine AREA spare/option part.Fits AREA-BJ029 Front disc brake for HPI Baja 5 models.Not compatible with the steel version.Contents:4 pieces

€6.90*

AREA-BJ029/07 Alloy Brake lever

Genuine AREA spare/option part.Fits AREA-BJ029 Front disc brake for HPI Baja 5 models.Not compatible with the carbon version.Contents:1 piece

€9.90*

AREA-BJ029/11 Brake cable mount

Genuine AREA spare/option part.Fits AREA-BJ029 Front disc brake for HPI Baja 5 models.Contents:1 piece

€11.90*

Customers also viewed

7300/09 FG Zenoah engine G230RC

Genuine FG spare/option part. The FG Zenoah G230RC is a further development of the Zenoah G230RC. At present it is the most powerful 23 cm³ serial engine. A repeated reworking of parts such as piston, cylinder and crankcase as well as a modification of the carburetor resulted in a further increase of power.Contents:1 piece

€299.50*

6048 FG Steel gearwheel big 48 teeth

€53.90*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€47.90*

Tuning brake pads y0050 for mechanical FG brake, 4 piece set

uning brake pad set, 4 pieces for steel brake discs. Suitable for all mechanical wheel brakes from FG and HPI y0056 to significantly increase the braking force. Set contains 4 brake pads.

€49.90*

8457/03 FG Competition brake lining glued for FG and HPI disc brakes

€44.50*

DBXL017 ATOP Aluminum front chassis brace for DBXL-E 2.0

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum front chassis brace for Losi DBXL-E 2.0.Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 piece

€29.90*

y0315 Elcon Aluminum a-arms, rear lower, for FG Evo and Sportsline, truck width, pair

Rear lower a-arms for all FG Evo cars (except 2020 series) that will bring the car to Race Truck width. The arms can also be installed as an upgrade in Sportsline trucks up to and including the 13 series. The arms are compatible with all other FG parts like uprights, Evo shock mounts and Evo stabilizer bar.Due to the increased width you will also need longer driveshafts turnbuckles for the upper a-arms and shock shafts for installation in an existing Evo. When upgrading a Sportsline truck to the Evo parts you will need a complete Evo stabilizer bar and shock mounts, rose joints and conical spacers instead. Regular price: 129.90 EURSpecial offer: 89.90 EURContents:2 pieces

€89.90*