15 products found for "fg_7459"

rc-car-online - Home

7459 FG Shifting claw

Genuine FG spare/option part. Suitable for all 2-speed gears.Content:1 piece

€30.70*

7439 FG Alloy gear carrier 52mm - 1pce.

Item N° 7439 Alloy gear carrier 52mm - 1pce.For 44T - 39T spur gears.For 10 mm diameter shafts.

€41.90*

7409 FG Samba 8 Racing - tuned pipe system DMC 10-1504

Genuine FG spare/option part. We have tested and optimized the Samba 8 tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! In combination with the Mecatech Expert hydraulic brake and repositioning the fuel tank for about 2 cm to the right, the Samba 8 system can also be installed in C5 + R5 cars!And in July 2016 at the European Championships in Bolonga / Italy they not only won the European Championship,the complete podium so place 1 to 3 was equipped with Samba pipes.Samba 8 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit. The mounting pictures shows the Samba 8 in Titan version.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellAll 10 participants of the main final (rankings 1 to 10!) at the 1:5 last World Championship in France, used a Samba titanium version.Original statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"Contents:1 piece

€349.50*

7451 FG 2-speed gear box 1:6 2WD - 1pce.

Item N° 7451 2-speed gear box 1:6 2WD - 1pce.2-speed gear box, retrofotting is possible for all 1:6 FG 2WD cars, does not fit Formula 1 and 4WD cars, adjustable shift point, high reliability, gear wheels can be changed in no time. During a competition we recommend to use the small gear wheels with 16-26 teeth in alloy oder steel.Contained pinions: 18 to 46 teeth and 20 to 44 teeth.

€234.95*

7456 FG Alloy hub A 52mm - 1pce.

Item N° 7456 Alloy hub A 52mm - 1pce.Suitable for gear wheels with 42 or 44 teeth in connection with the 2-speed gears or .

€35.90*

7453 FG 2-speed gear box 1:6 4WD for all FG Off Road/ Monster cars

Genuine FG spare/option part.2-speed gear box, retrofitting is possible for all FG 1:6 Sportsline 4WD models. Adjustable shit point, built very robustly, therefore high reliability gearwheels can be replaced in not time. The small gearwheels are made of hardened steel.Included gears:1st gear: 18T / 46T2nd gear: 20T / 44TNot suitable for Competition and Formular 1 models.Contents:1 set

€244.95*

7429 FG Plastic gearwheel 41 teeth - 1pce.

Suitable for all 1:5 models. With 63 mm diameter.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€17.90*

7495 FG Volume compensation for engine - set

Through mounting the volume control you achieve a power increase in the lower speed range. Further advantages are a spontaneous gas reduction and a lower fuel consumption. Suitable for all 1:5 models, 1:6 Race-Trucks, Formula 1 and the Off-Road models Leopard and Beetle.

€99.90*

7458 FG Carrier - 1pce.

Item N° 7458 Carrier - 1pce.Suitable for all 2-speed gears.

€40.95*

7457 FG Alloy hub B - 1pce.

Item N° 7457 Alloy hub B - 1pce.Suitable for gear wheels with 40, 42 or 44 teeth in connection with the 2-speed gears or .

€35.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7450 FG 2-speed gear box 1:5 2WD

2-speed gear box, retrofotting is possible for Smartech/Carson C5, all 1:5 2WD FG models except Formula 1 + FG EVO 2020, adjustable shift point, high reliability, gear wheels can be changed in no time. During a competition we recommend to use the small gearwheels with 16-26 teeth in alloy oder steel.If you use the gear wheels (38 teeth) you need the alloy hub A 47mm ().Contained pinions: 22 to 42 teeth and 24 to 40 teeth.Contents:1 piece

€234.95*

7452 FG 2-speed gear box 1:5 4WD for Sportsline 4WD, set

Genuine FG spare/option part.Fits FG cars with 510 mm and 535 mm wheelbase. Not suitable for Competition and Formular 1 models.Included gears:1st gear: 22T / 42T2nd gear: 24T / 40T2-speed gear box, retrofitting is possible for all FG 1:5 Sportsline 4WD models. Adjustable shit point, built very robustly, therefore high reliability gearwheels can be replaced in not time. The small gearwheels are made of hardened steel. If you use the gearwheel 7424/01 (38 teeth) you need the allow hub A 47 mm 7456/01.

€244.95*

7469 FG 2-Speed plastic bush - 2pcs.

Item N° 7469 2-Speed plastic bush - 2pcs.Suitable for all FG 2-speed gear boxes.Inner diameter 15.9 mmOuter diameter 17.2 mmFlange diameter 20.9 mmFlange thickness 1 mmWidth 7.5 mm

€5.70*

7455 FG Gear shaft - 1pce.

Item N° 7455 Gear shaft - 1pce.Suitable for all FG 2-speed gearboxes.Diameter 10 mmLength 114 mm

€45.90*

87459 HPI Spacer for clutch bell holder Baja 5B

Genuine HPI spare/option part. Color: purple.Contents:1 set

€15.38*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

15 products found for "fg_7459"

Filter products

rc-car-online - Home