7495 FG Volume compensation for engine - set

€99.90*

Available

Product number: fg_7495

EAN: 4058575004721

Product information "7495 FG Volume compensation for engine - set"

Through mounting the volume control you achieve a power increase in the lower speed range. Further advantages are a spontaneous gas reduction and a lower fuel consumption.

Suitable for all 1:5 models, 1:6 Race-Trucks, Formula 1 and the Off-Road models Leopard and Beetle.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

7706 FG Cylinder gasket for Zenoah G240, G270, G290 and 4-Bolt Chung Yang

Genuine FG spare/option part.Applications:Click here!The gasket have a thickness from 0,40 mm. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:1 piece

€5.40*

7474 FG Alloy gear plate 97 for 2WD and 4WD

Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€99.90*

7750 FG small module 1,25 transmission set, steel

Small steel modul (1,25) transmission set for Sportsline and Challenge Line, improves performance and reliability.

€119.90*

8012 FG Body mount middle

Genuine FG spare/option part. Contents:2 pieces

€9.90*

This product is no longer available.

7573/01 FG Receiver 2,4 GHz for FG-RS3

Genuine FG spare/option part. Contents:1 piece

€42.90*

7573 FG Radio controll 2,4 GHz FG-RS3 incl. receiver

Genuine FG spare/option part. Wheel / trigger type transmitter with ergonomic designRubber coated non-slip wheelLarge LCD display for easy settings10 model memoriesFHSS ModulationFailsafeDual rate on channels 1, 2 and 3Trims on the 3 channelsLow voltage (9,5V)7573/01 FG receiver 2,4 GHz fpr FG-RS3Contents:1 piece

€75.90*

8014 FG Body mount, side, rear, for Alfa Romeo, Calibra and GTR

Genuine FG spare/option part. Contents:2 pieces

€13.90*

8017 FG Brake rod set for 1:5

For touring cars and Leopard. With 2 mm thick and 440 mm in the lenght

€9.90*

Details

7497/01 FG Rear brake 2WD/4WD

Genuine FG spare/option part. The set will shipped without gear carrier plate. Contents:1 set

€55.90*

7909/01 FG Program card

Genuine FG spare/option part. Small and light program card for mobile use to change or adjust parameters of brushless control FG order number: 7909 fast and clearly. Supply 2S-6S Li-Po (7.4 22V)BEC 6V/3ADimensions: 55 x 48 x 38 mmWeight: 185gContents:1 piece

€32.90*

7800 FG Zenoah G290RC with Walbro carburetor WT 990

Same dimensions as the Zenoah G230, G240, G260, G270.New generation Zenoah engine with 28,5cm³ cylinder capacity and approx. 3.9 hp. The cylinder is fixed with 4 screws. The technical details are identical to the Zenoah engines G240RC and G270RC.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€284.90*

7911 FG Cooling fan for 7900, set

Genuine FG spare/option part.Cooling fan for electric engine no.: 7900 FG Electric engine E-Power BL-730KV.

€39.95*