6490 FG Alloy spur gear adaptor

€39.99*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6490

EAN: 3410564509296

Product information "6490 FG Alloy spur gear adaptor"

Item N°6490
Alloy spur gear adaptor

Length 26.5 mm
Bore 10 mm
Bolt circle for spur gear 3 x 35 mm, M5 thread

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

6176 FG Dampening rubber for body support

Genuine FG spare/option part.Contents:4 pieces

€9.90*

6185 FG Side body mounts

Genuine FG spare/option part. For all monster models.Contents:2 pieces

€5.50*

7474 FG Alloy gear plate 97 for 2WD and 4WD

Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€93.40*

6745 FG Shim ring 10x16x1mm - 10pcs.

Shim rings to compensate the axial play of the shaft, to use as washers a.s.o.Part is delivered in silver or black color from vendor!

€5.30*

6493/01 FG Steel spur gear 48T - 1 pce.

Item N° 6493/01 Steel spur gear 48T - 1 pce.Outer diameter: 75 mmInner diameter: 26 mmBolt circle: 3 x 35 mmWidth: 10 mmModule: m=1.5

€56.70*

66217 FG Steel pinion 14T narrow, 1pce.

Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

Similar products

6745 FG Shim ring 10x16x1mm - 10pcs.

Shim rings to compensate the axial play of the shaft, to use as washers a.s.o.Part is delivered in silver or black color from vendor!

€5.30*

6730/05 FG Allen Grub screw M5x5 mm, 15 Stück

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.30*

6423 FG Gear protector for 42/44/46/48 T spur gears

Genuine FG spare/option part. Gearwheel protection in transparent polycarbonate for all 1:6 Off-Road, Monster-Beetle, Big-Foot and Truck models with the gearwheels 43, 44, 46, 48 teeth. Protects the driving gearwheels almost from dirt, sand and stones. We recommend the mounting when driving on car parks and Off-Road ground. Not suitable for Formel 1, Leopard 2 + 4 Competition, Competition and Competition Evolution models.Contents:1 piece

€43.90*

7439 FG Alloy gear carrier 52mm - 1pce.

Item N° 7439 Alloy gear carrier 52mm - 1pce.For 44T - 39T spur gears.For 10 mm diameter shafts.

€39.95*

6730/52 FG Grub screw with safety device M5x5mm Torx, 10 pieces

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€3.10*

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft

Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*

Configure now

7439/05 FG Alloy gear carrier 52mm special, 1 pce.

Item N° 7439/05 Alloy gear carrier 52mm special, 1 pce.Precision alloy gear carrier, exact support of the plastic gearwheels 39, 40, 41, 42 and 44 teeth. Very low height design. For 10 mm diameter shafts.Please note: competition layshaft 6041/05 is necessary for installation!

€41.99*

Details

6439 FG Alloy spur gear carrier 60 mm

Genuine FG spare/option part. For 48T - 46T spur gears.Contents:1 piece

€43.99*

y0048 HT Alloy Ring Gear Adaptor 47/52/60 mm outside diameter

zahn_0011 Version: y0048/02 - 52 mm Ø medium (39 T - 44 T)+ 5.5EUR

Alloy ring gear adaptor for FG, Smartech, Carson and many other cars. Contrary to the stock plastic adaptor the aluminum version is secured by set screws.There are three sizes available:y0048/01 - 47 mm outer diameter, fits 38 tooth ring gearsy0048/02 - 52 mm outer diameter, fits 39/40/41/42/43/44 tooth ring gears - Weight: 29 grammsy0048/03 - 60 mm outer diameter, fits 46T and 48T ring gears - Weight: 31 gramms

Variants from €39.90*

€45.40*

7438 FG Alloy gear carrier 47mm - 1 pce.

Suitable for .For 10 mm diameter shafts.

€41.30*

6730/71 FG Allen Grub screw M5x6 mm

Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:15 pieces

€3.10*

y1427 HT steel spur gear on-road with 39, 40, 41 teeth

y1427 Version: y1427/40 HT steel spur gear

Fits FG and Smartech touring cars in combination with HT aluminum layshaft spur gear carrier on-road y1428. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions

€49.90*