31 products found for "fg_10050"

rc-car-online - Home

10050 FG Clutch gilmer belt pulley 18 teeth - 1pce.

Fits formula 1 cars only.

€27.90*

10054 FG Differential gilmer belt pulley 42T - 1pce.

Fits formula 1 cars only.

€36.90*

10059 FG Toothed belt 148x16mm

Genuine FG spare/option part.Suitable for formula 1 cars only.Contents:1 piece

€27.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

10052 FG Clutch gilmer belt pulley 20 teeth - 1pce.

Fits formula 1 cars only.

€27.90*

10055 FG Layshaft gilmer belt pulley 18 teeth - 1pce.

Fits formula 1 cars only.

€27.90*

10056 FG Main gilmer belt pulley 48 teeth - 1pce.

Fits formula 1 cars only.

€44.90*

10051 FG Clutch gilmer belt pulley 19 teeth - 1pce.

Fits formula 1 cars only.

€27.90*

10060 FG Gilmer belt 150x20mm

Genuine FG spare/option part.Fits formula 1 cars only.Contents:1 piece

€27.90*

10650 FG Alloy layshaft bearing mount - 1 pce

Spare part for F1 gear drive

€25.90*

10080 FG Engine mount small for F1 - 1pce.

Suitable for Formula 1.

€12.90*

10450 FG Front disk brake for F1 - set

Retrofitable bowden cable disk brakes for Formula 1 Sportsline and Competition models. Essentially improved brake power compared to the standard brake, sensitive adjustment.

€98.95*

10020 FG Brake rods-set for F1 300 mm

Suitable for Formula 1.Length: 300 mm

€7.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

10030 FG Front axle carrier

Genuine FG spare/option part.Suitable for Formula 1.Contents:1 piece

€19.90*

10040 FG Rear axle carrier left - 1pce.

Fits formula 1 cars only.

€23.90*

10010 FG Alloy chassis F1 - 1pce.

Suitable for the Formula 1.

€215.10*

ARA610050 ARRMA Ball Bearing sealed 6x10x3mm 2RS

Genuine ARRMA spare/option part. Contents:4 pieces

€13.99*

E540050 UFRC Transmission housing r/h

Genuine UFRC spare/option part. Fits Growler GX1.Contents:1 piece

€19.90*

510058, Nuts & bolts set, assy 3

Includes all screws, nuts and washers for installation of the bearing blocks and brakets for the second layshaft.

€12.80*

500502032/100 Carson CY-Eline Brushless controller 150A

Genuine Carson spare/option part. Fits CY-Eline models.Continuous Current: 150ABattery NIXX / LiPo: 6-18NC / 2-6S LiPoBEC: 3A/5,75VContents:1 piece

€199.99*

500500053 Carson Reflex Wheel Pro III 2.4 GHz BEC

Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver

€64.99*

y1308 Aluminum servo mounts Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP Losi 5ive-T, 5ive-B and Mini

y1308 Version: y1308/03 Set with mount A and Mount B+ 27.9EUR

Genuine HT spare/option part.These servo mounts allow for a simple and strong mounting of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high power servo for steering application.The massive servo mounts bolt to the chassis using existing mounting holes. The mount for the stock servo has to be cut off the radio plate. The aluminum servo mounts feature a pair of additional mounting holes to install a stock servo should ever the need arise. The rear mount bolts to the radio plate as well, providing additional support for the plate.Scope of delivery y1308/01:1 x Mount A2 x Socket head cap screws 3 x 16 mm2 x Countersunk screw 4 x 14 mm2 x Shim ring 4,2 mmScope of delivery y1308/02:1 x Mount B1 x Socket head cap screw 3 x 25 mm1 x Socker head cap screw 3 x 16 mm2 x Countersunk screw 4x14 mm2 x Shim ring 3,2 mmContents:1 set

Variants from €44.90*

€72.80*

TLR351005 TLR Aluminium rear chassis brace 5ive-B

Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 piece

€39.99*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Tuning brake pads y0050 for mechanical FG brake, 4 piece set

uning brake pad set, 4 pieces for steel brake discs. Suitable for all mechanical wheel brakes from FG and HPI y0056 to significantly increase the braking force. Set contains 4 brake pads.

€49.90*

6598 FG Analog servo T1005

Genuine FG spare/option part. Powerfull servo for 2WD and 4WD 1/5 and 1/6 cars. Ballraced, with metal gears.Technical data:Voltage : 6.0-7.4VSpeed : 0.14s-0.12s/60°Torque: 9-10kgcmDimensions : 40.8 x 20.1 x 38 mmWeight : 56 gContents:1 piece

€51.90*

31 products found for "fg_10050"

Filter products

rc-car-online - Home