- Models / cars
- General 1:5 / 1:6
-
Technic 1:5 / 1:6
- Front a. Rear axle
- Differential and bearings
- Brake, shocks
-
Engines & more
-
Engines - Gas and Accessoires
- Engines
- Cylinder kits
- Starter
- Engine spare parts
- Gaskets
- Exhausts
- Air filter / air boxes
- Carbs / isolators / accessories
- Spark plugs / spark plug caps
- Crankshafts and ball bearing for Engines
- Misc. engine accessories
- Tools
- Chrome parts
- Sealant
- Engine mounts / quick mount
- To fuel and supplies
- Reed valve block
- Motors - Electric and Accessoires
-
Engines - Gas and Accessoires
- Clutches & Drivetrain
- Tires, rims, adapter
- Bodyshells paint & more
- RC/Servos/Batteries/co.
- Conversion kits
- Used
- Work equipment
- Models 1/7 and smaller
- General 1:8 / 1:10
- Outlet
Filter products
7303 Samba 7 Titan Racing tuned pipe system ESW DMC 50-1101
The Samba 7 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 7 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 6 pipe. The Samba 7 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! New New connection from exhaust to manifold Lower center of gravity through new alignment Also suitable for 510 wheelbaseSamba 7 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 7 tuned pipe system is race legal for racing, with the DMC approval number 50-1101 engraved. The Samba 7 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as well<Will fit medium (510 mm) wheelbase cars from FG as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development"
y1127 Carson / Smartech tuned pipe with manifold for 1/5 scale cars set
Complete tuned pipe system, will be delivered as shown with manifold, hose with clamps and variable mount. Fits FG and Carson touring cars / GTs with long wheel base.The tuned pipe is for a 535 wheelbase. The diameter is 51 mm and the complete length is about 300 mm.
8300 Samba 8 Titan Racing - tuned pipe system DMC 10-1504
The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"
7400/04 FG 3-chamber tuning resonance silencer 5-028/DMC
Original FG product The 3-chamber tuning resonance pipe is supplied without manifold and mounting supplied. 1 piece
y172 CAD X-Pipe 1 resonance pipe, used
High-performance steel tuning resonance pipe with a great look and superb workmanship, used. Good condition, see fotos. The manifold is not original. Suitable for 2WD on-road models, scale 1:5, with horizontal motor and 510 and 530 wheelbase. See photos for scope of delivery and condition. 1 piece
8100 Samba 8 Racing - tuned pipe system DMC 10-1504 for 2WD
We have tested and optimized the Samba 8 tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Not fit on 4WD!Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit. The mounting pictures shows the Samba 8 in Titan version.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"
8103 ESW Samba 8 Racing - tuned pipe system DMC 10-1504 for short wheelbase
We have tested and optimized the Samba 8 tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit. The mounting pictures shows the Samba 8 in Titan version.Original statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"
7390 FG Serial pipe Megane Eco-Line
Genuine FG spare/option part. Spare silencer for Megane Eco-Line.Contents:1 piece
8303 ESW wSamba 8 Titan Racing - tuned pipe system DMC 10-1504 for short wheelbase 510mm
The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! In the short version 8303 ESW, the installation of the tuned pipe is possible in vehicles with 510mm wheelbase. Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"
7391 FG Serial pipe for 1:5 and Trucks Eco-Line - 1pce.
Genuine FG spare/option part.Standard muffler suitable for Audi A4, BMW 320, Mercedes CLK-GTR, Porsche GT1, Chrysler Viper and Peugeot 406.