8100 Samba 8 Racing - tuned pipe system DMC 10-1504 for 2WD

We have tested and optimized the Samba 8 tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit. The mounting pictures shows the Samba 8 in Titan version.Original statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

Genuine FG spare/option part. We have tested and optimized the Samba 8 tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! In combination with the Mecatech Expert hydraulic brake and repositioning the fuel tank for about 2 cm to the right, the Samba 8 system can also be installed in C5 + R5 cars!And in July 2016 at the European Championships in Bolonga / Italy they not only won the European Championship,the complete podium so place 1 to 3 was equipped with Samba pipes.Samba 8 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit. The mounting pictures shows the Samba 8 in Titan version.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellAll 10 participants of the main final (rankings 1 to 10!) at the 1:5 last World Championship in France, used a Samba titanium version.Original statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"Contents:1 piece

Genuine ARRMA spare/option part. Contents:4 pieces

include:TT1499 Top Tuning Safety Bag for LiPo batteriesTT1530/450 Top Tuning 5000 mAh LiPo battery 4S,y1581 HT H6AC/DC compact charger, 50W Product DetailsWith an independent suspension based on the ROAR-winning TLR 8IGHT and officially licensed scale details from Cody Waggoner’s full-size Lasernut U4 race car, the Super Lasernut makes no compromises — and it’s Losi’s most affordable large scale buggy.Key FeaturesFull metal 4WD drivetrain to handle extreme off-road abuseSpektrum Smart 6S power system for 50 mph speed potentialLED light pods, light bar, and rear tail light barTrue race suspension geometry with many tuning capabilitiesFully assembled and ready-to-run — only battery and charger requiredIn The Box(1) Fully Assembled Losi 1/6 8IGHT-X Super Lasernut 4WD Brushless Buggy RTR(1) Spektrum DX3 2.4GHz Smart DSMR Transmitter(4) AA Transmitter Batteries(1) Spektrum S905 Waterproof Metal-Gear Digital Steering Servo(1) Spektrum SR315 3-Channel Dual Protocol Receiver(1) Spektrum Firma 4074 2050Kv Brushless Motor(1) Spektrum Firma 150A Smart V2 Waterproof ESC(1) Instruction Manual Miscellaneous Tools Needed to Complete(2) 3S Hardcase LiPo Battery(1) Compatible Charger(1) LiPo Safe Charging BagLosi 8IGHT-X 4X4 Super Lasernut 1/6 Scale Buggy Overview Ultra4 racing is a unique mix of off-road motorsports. There are challenging rock trails that require precision and torque. The desert floor is filled with ruts and whoops to conquer at 80 mph speeds. Then comes the dry lake bed, where the pedal hits the metal and the top gear gets you over 120 mph. Breakdowns are inevitable, but the clock doesn’t stop for repairs. Ultra4 is the ultimate form of off-road competition!The ready-to-run Losi Super Lasernut reproduces one of Ultra4 racing’s most successful vehicles — Cody Waggoner’s incredible Lasernut U4 — in highly detailed, high-powered 1/6 scale. Anyone who’s an extreme off-roader at heart will feel their pulse race when experiencing its perfect blend of performance and scale realism. You’d never expect that this is also Losi’s most affordable large scale buggy.For drivers with a competitive streak, one of the biggest highlights is an independent suspension based on the ROAR Nationals winning platform, the TLR 8IGHT. It’s quite possibly the best suspension available for desert racing’s style of cornering and jumping.Other standout features include a rugged, all-metal 4WD driveline built to handle extreme off-road terrain, and a 6S-capable Spektrum brushless power system that delivers top speeds in excess of 50 mph. Spektrum radio equipment is also included that offers the unmatched advantages of Smart technology for exceptional performance, convenience, and reliability.Because the Super Lasernut shares the same platform as championship-winning TLR 8IGHT racing buggies and truggies, it also accepts many top-of-the-line TLR option parts. If you enjoy using your mechanical skills to get results, wait until you see what you can do with the Super Lasernut. Next-level racing performance is only a few well-chosen upgrades away.One look at the factory-finished body proves that Losi made no compromises in bringing the Lasernut U4 to 1/6 scale. From the helmet air hoses and fire extinguishers to safety nets and more, everything you’d expect to see on an Ultra4 racer is authentically reproduced. A functional LED lighting system ensures that the fun won’t stop when the sun goes down. Of course, Losi also secured partnerships your favorite full-size off-road manufacturers in order to add numerous officially licensed details.While the Super Lasernut is at home on the trails, in dirt lots, and in any large open areas, it lives for desert action where you can put yourself in U4 race driver’s seat. Take it along with your quads, dirt bikes, and UTVs, for some fun back at camp with your family and friends.Get the ready-to-run Losi Super Lasernut 4WD — and experience 1/6 scale off-road racing easily, affordably, and in the extreme.Losi 8IGHT-X 4X4 Super Lasernut 1/6 Scale Buggy Features:Strong, 4mm thick aluminum chassisAluminum-bodied, adjustable oil shocks on aluminum shock towersAluminum spindles and adjustable steel turnbucklesOversized, high-torque Spektrum S905 steering servoSpektrum DX3 2.4GHz Smart DSMR transmitter and dual protocol SR315 receiverAccepts many TLR option parts for next-level performanceLoaded with accurate scale detailsTrue race suspension geometry with adjustable camber, camber rate, shock angle, and ride heightFront, center, and rear sealed differentials for maximum tractionFront and rear swaybars for stable corneringFlip-top cage for easy battery accessOfficially licensed Raceline Ryno wheelsOfficially licensed BFGoodrich KR3 tiresFully functional spare tireMETAL WHERE IT COUNTSLosi designers approached the Super Lasernut with the same attention to reliability and durability that full-scale manufacturers give their off-road vehicles. Rugged, damage-resistant metal parts are used wherever extra strength is needed to handle the stress of high-speed driving over harsh, ever-changing surface conditions.FULL-METAL DRIVETRAINFrom the axles to the ring and pinion and main center spur gear, every part of the driveline is made of heat-treated steel to withstand off-road abuse. Its strength and endurance have been put to the test in demanding, hour-long racing main events and proved up to the challenge!ALUMINUM SHOCK TOWERSLightweight and strong, the aluminum shock towers support the shock movement needed to absorb bumps and maintain tire traction. Use the tuning holes to find the best shock position for the surface and your driving style.ALUMINUM ADJUSTABLE SHOCKSThe threaded shocks let you adjust ride height to raise or lower the center of gravity for optimum handling. The shocks can be tuned for harder or softer damping using different pistons, springs, and oil (all available separately).ALUMINUM CHASSISIts 4mm thick aluminum chassis gives the Super Lasernut a stable foundation, along with the strength necessary to keep going through long stretches of punishing off-road racing.ALUMINUM SPINDLESThe durability of its aluminum spindles lets you steer the Super Lasernut through rough terrain with confidence.STEEL TURNBUCKLESAdjustable steel turnbuckles absorb the angled impact while cornering and let you tune camber and toe for the best handling characteristics.INDUSTRY-LEADING ELECTRONICSThe radio equipment and brushless power system included with the Super Lasernut take advantage of state-of-the-art Spektrum Smart technology for exceptional performance, convenience, and reliability.OVERSIZED STEERING SERVOThe massive torque (555.50 oz-in @ 7.2V) of a factory installed, large scale Spektrum S905 servo keeps your Super Lasernut steered in the right direction over difficult terrain. An aluminum servo horn is included for durability.SPEKTRUM SMART ELECTRONICSSpektrum Smart electronics make you aware of potential issues before they become problems. You can receive important telemetry data in real time, right at your fingertips, by downloading the free Spektrum Dashboard app to your mobile device and adding the BT2000 Bluetooth Module (available separately) to the included DX3 transmitter. SPEKTRUM FIRMA 150A SMART V2 ESCIn addition to offering Smart telemetry capabilities, the Spektrum Firma 150A Smart V2 waterproof ESC turns the 22.2 volts of power coming from your 6S LiPo battery into terrain-ripping speed as soon as you punch the throttle. SPEKTRUM FIRMA 4074 2050Kv BRUSHLESS MOTORAdd a 6S LiPo battery, and the installed, fully sealed, maintenance-free Spektrum 2050Kv brushless motor delivers more than enough raw power to get every driver’s adrenaline pumping.SPEKTRUM DX3 2.4GHz SMART DSMR TRANSMITTERThe throttle limiting function on the included Spektrum DX3 2.4GHz transmitter lets novice racers limit the buggy’s top speed to 50% or 75% of its full potential until they’re ready to unleash it all. Using a Smart battery, you can follow how much capacity is available on the transmitter’s Smart battery level indicator.SPEKTRUM SR315 3-CHANNEL DUAL PROTOCOL RECEIVERWhen you want more precision from your electronics, there’s no need to install a new receiver. The included Spektrum SR315 receiver not only gives you the benefits of Smart technology, but with a transmitter upgrade will allow you to tune on-board electronics wirelessly with forward programming.TRUE RACE SUSPENSION GEOMETRYIf you’d like to learn about suspension dynamics, the Losi Super Lasernut gives you the perfect opportunity. You’ll be able to tune the suspension for the exact handling characteristics you want, with adjustable camber, camber rate, shock angle, ride height, and more.THREE SEALED OIL-FILLED DIFFERENTIALSThe front, center, and rear differentials allow each tire to use the motor’s torque to deliver maximum racing traction. You can tune the differentials with TLR silicone diff fluids (available separately) to adapt the Super Lasernut to different conditions. SWAY BARS SWAY BARS Front and rear sway bars are standard on the Super Lasernut. They keep the chassis stable and level with the surface as you race through the corners.ADJUSTABLE CAMBER & TOEThe robust steel camber links and tie rods are quick and easy to adjust, letting you tune the way your Super Lasernut enters and exits the corners.ACCEPTS TLR UPGRADE PARTSBecause the Super Lasernut shares the same platform as championship-winning TLR (Team Losi Racing) 8IGHT racing buggies and truggies, you can use many TLR option parts to upgrade it for next-level racing performance.BEST IN CLASS SCALE FEATURESGo ahead. Look closely. From the air hoses and fire extinguishers to safety nets and more, everything you’d expect to see on an Ultra4 racer is authentically reproduced in 1/6 scale on the Super Lasernut. Along with capturing the realism of Cody Waggoner’s Lasernut U4, Losi also secured partnerships with some of your favorite full-size off-road manufacturers in order to include numerous officially licensed details.FLIP-TOP CAGEEnjoy scale looks with less hassle. When it’s time for maintenance or a battery swap, just remove the rear tire, unlatch the front clip, and you have quick, easy access to the on-board components.FULLY FUNCTIONAL SPARE TIRESecured by a scale wheel nut, the included spare tire not only completes the scale look but is also fully functional. It’s ready to use if you need a replacement after running through extreme terrain.OFFICIALLY LICENSED RACELINE RYNO WHEELSIn full-scale off-roading, Raceline Ryno wheels lead the way in performance, design, and durability. These are the wheels that Cody Waggoner has on his full-size Lasernut U4, and Losi includes officially licensed scale versions on the Super Lasernut.OFFICIALLY LICENSED BFGOODRICH KR3 TIRESNot only are the officially licensed BFGoodrich KR3 tires tough and realistic, but they also provide the Super Lasernut with relentless traction on the most extreme and demanding terrain.LED LIGHTSThe Super Lasernut is ready to play even after the desert sun sets, thanks to its realistic and functional lighting system. Losi includes amber light pods mounted to the pillar; a long, bright white front LED light; and a multi-colored rear LED light. It’s just like the real thing!WINDOW NETSLosi is known for raising the bar when it comes to scale realism, and has done it yet again with these authentic window nets. They’re modeled after the ones used on the real Lasernut U4.FULL ROLL CAGEWhen its body panels are removed, the Super Lasernut still displays impressive realism with its race-inspired, molded full roll cage.DRIVER FIGURESIt takes a dedicated team to succeed in extreme off-road racing. At the wheel, you need a skilled and highly focused driver with a tremendous amount of stamina. The co-driver provides navigation expertise, interpreting maps and keeping their partner aware of where to turn and what obstacles lie ahead.MOLDED BODY DETAILSIf it’s found on the full-size Lasernut U4, you’ll find it here. An exhaustive amount of accurate detail has been molded into the Super Lasernut body, including the mirrors, vents, fan unit, EXO bumper, fire extinguisher, and more.Drive:4WDMotorization:CurrentRTR:With RTRScale:1/6

The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

Samba 7 exhaust manifold, for steel and titanium pipe, 1 pce.Genuine Samba manifold for series 7 and 8 tuned pipes, fits steel and titanium version.

Genuine Mielke spare/option part. Even better uniform power over the whole speed range. Especially in the major driving areas from 10.000 rev / min. to full speed. With 560 grams ideal weight for balanced driveability. Center of mass as low as possible new construction. Only 0,8 mm of specially thin steel metal.Compared to its predecessor the tube's diameter increased for about 10 mm. which allows for the better performance. The new set also comes with teflon seal # 5702.Including manifold and mounting material.Suitable for: 1:5 on road 2WD FG Sportsline, Evo- and Competition cars Mecatech FW01 S88R Harm SX4, SX5 Genius Contents:1 piece