Fits losi 5ive-T. Dimensions grommet:total length: 53 mm, down to 38 mm compressibleinner diameter: shaft 6 mm, shaft intake 19 mm Dimensions clamping ring: RW 20 galvanized, burnished for 20mm grommets Set content:Five x grommetTen x claming ring
Genuine Losi spare/option part. Contents:1 piece
Genuine HT spare/option part.These heavy duty differential drive cups for the center differential in a Losi 5ive-T/2.0/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups. Replaces stock parts LOSB3214 and TLR252008.300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.The 300M steel center diff drive cup has the same dimensions as the stock part.Contents:2 pieces of 300M steel HD differential drive cup, center diff application2 pieces of 4x18 drive pins
Item N° LOSB 3214 Center Diff Outdrive Set 5T, 2 pcs.Content:2 Pieces
Genuine Losi spare/option part. Contents:2 pieces
Genuine HT spare/option part. The spool replaces the center differential and keeps the speed of both output shafts the same. As a result, especially the acceleration of the vehicle is significantly increased.The spool is nicely made of high-quality burnished steel and very strong. Its total length is the same as a normal differential housing with gasket. The gasket is no longer used with the spool. The driving pin of the front output shaft is secured by an O-ring. The screws for the connection with the spur gear are secured with nylock nuts. This eliminates the need for waiting for the curing of a thread locking compound and makes the removal of screws with damaged head much less critical.The spool would physically fit front and rear applications as well; however, its use here makes no sense to driving dynamics.Scope of delivery:Spool2 x Driving pin 4 x 20 mmO-ring4 x Steel nylock nut M4
Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Content:2 pieces
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Content:1 set
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Content:2 pieces
Genuine Losi spare/option part. Contents:2 pieces
Genuine Losi spare/option part. Fits losi 5ive-T, TLR 5ive-B and Mini. Dimensions grommet:total length: 53 mm, down to 38 mm compressibleinner diameter: shaft 6 mm, shaft intake 19 mm Dimensions clamping ring: RW 20 galvanized, burnished for 20mm grommets Contents2 x grommet4 x claming ring
Genuine HT spare/option part. Hardened pins made of 100Cr6 steel for driveshafts, differentials, wheel drives and similar applications. Pack of ten. Sizes available:y1345/01: 4 x 18 mm, e.g. for Losi 5ive-T/Mini and HPI Baja differentials or HPI Baja layshafty1345/02: 4 x 20 mm, e.g. for Losi 5ive-T/Mini CVD jointsy1345/03: 4 x 24 mm, e.g. for Losi DBXL and HPI Baja wheel hexy1345/04: 5 x 24 mm, e.g. for Losi 5ive-T/Mini wheel hexContents:10 pieces
Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B and 5ive-T.Contents:1 piece
Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B, 5ive-T and Mini WRC.Contents:2 pieces
Genuine Losi spare/option part. Contents:1 piece
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Content:1 set
Genuine Losi spare/option part. Contents:1 set
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Dimensionally identical with B55020Content:1 piece
Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Content:2 pieces
Genuine Losi spare/option part. Contents:1 piece
Genuine Losi spare/option part.Contents:2 pieces
Genuine Losi spare/option part.Contents:2 pieces
Genuine Losi spare/option part. Contents:1 set