LOSB3216 Losi F/R Driveshaft & CV Coupler 5T

€29.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_losb3216

EAN: 605482044551

Product information "LOSB3216 Losi F/R Driveshaft & CV Coupler 5T"

Genuine Losi spare/option part.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

LOSB5044 Losi 19T Pinion Gear, 1.5M & Hardware 5T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Dimensionally identical with B55029Contents:1 piece

€29.99*

y19302/01 Flywheel and Clutch puller CY, Zenoah, HPI, Losi

Genuine HT spare/option part. Especially for CY / Zenoah G230/240/260/270/290/320, HPI and Losi engines.Can be used for removal of the standard clutch as well!Contents:1 piece

€17.90*

y19302/02 Piston Blocker for almost all engines

Genuine HT spare/option part. Helpful tool for removal of clutch shoes, flywheels and many more.FitsZenoah G230/G240/G260/G270/G290/G320Chung-Yang enginesPT enginesLosi enginesHPI enginesThreadsize:M10 x 1Contents:1 piece

€9.90*

y1419/02 Sintered steel clutch complete set for Losi 5ive-T/2.0, Mini and Desert Buggy

Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.Content:5315 Clutch block carrier5315/01 Screw for carrier7318 Dowel screw for clutch blocksy1419 Sinter clutchy1419/01 Clutch springs for Sinter clutch

€49.90*

LOSB3224 Losi F/R Stub Axle & Pins 5T and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Dimensionally identical with B55020Content:1 piece

€29.99*

LOSB5903 Losi Rod End Set Losi 5ive-T, TLR 5ive-B and Mini

Genuine Losi spare/option part. Contents:12 pieces

€19.99*

Similar products

LOSB5015/set Losi Gas Tank 5ive-T, 5ive-T 2.0, TLR 5ive-B and Mini, complete incl. mounting set

Genuine Losi spare/option part. Since quite a few of our customers order the Losi 5ive-T 2.0 with brushless drive, we have several genuine tank sets with mounting brackets included from this conversion in stock. Therefore we put them on sale at an exceptionally low price.The regular price for this set of spare parts is 84.50 .Complete set with tank, ventilation and fuel hose, tank pendulum, mounting brackets and screw-on fuel cap.Tank capacity: 800 ml.Content:1 set

€49.90* €84.00* (40.6% saved)

LOSB5972 Losi Outer Axle Ball Bearings sealed, 12 x 24 x 6 mm, Losi 5ive-T/2.0, TLR 5ive-B and Mini WRC.

Fits Losi 5ive-T, TLR 5ive-B and Mini WRC.Dimensionally identical with B59010 / B59011.Content:2 pieces

€9.99*

LOSB5904 Losi Camber & Steering Pivot Ball Set Losi 5ive-T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part. Compatible with B51008/55041Compatible with B51008/55042Compatible with B51008/55043Contents:12 piece

€34.99*

Details

LOSB5800 Losi Body clips for 5ive-T/2.0, TLR 5ive-B and Mini

Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini. Content:2 x body clip approx. 1.4 mm wire diameter and 85 mm toal length6 x body clip approx. 1.4 mm wire diameter and 25 mm toal length12 x body clip approx. 2.0 mm wire diameter and 43 mm toal length

€9.99*

LOSB5903 Losi Rod End Set Losi 5ive-T, TLR 5ive-B and Mini

Genuine Losi spare/option part. Contents:12 pieces

€19.99*

LOSB5045 Losi 20T Pinion Gear, 1.5M & Hardware 5ive-T/2.0, TLR 5ive-B und Mini WRC

Genuine Losi spare/option part. Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Technical info:Modul: 1,5Teeth: 20 piecesContents:1 piece

€29.99*

LOSB5800/02 Losi Body clips medium, 43 mm

Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 2 mm.Length: 35 mm.Content:10 pieces

€4.90*

LOSB5800/03 Losi Body clips smal, 25 mm

Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 1,4 mm.Length: 25 mm.Content:10 pieces

€3.50*

LOSB3225 Losi F/R Wheel Hex & Pin 5T, TLR 5ive-B and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with B55015Content:2 pieces

€39.99*

LOSB5023 Losi Air Cleaner Foam Elements for 5T

Genuine Losi spare/option part. Spare part for 5T standard air filter: LOSB 5022 Air Cleaner Set Complete 5T.Contents:2 pieces

€19.99*

LOSB5044 Losi 19T Pinion Gear, 1.5M & Hardware 5T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Dimensionally identical with B55029Contents:1 piece

€29.99*

LOSB3217 Losi CV Joints and Pins 5T, TLR 5ive-B and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Content:2 pieces

€9.99*

Details

Customers also viewed

LOSB5971 Losi Inner Axle Bearings, 20 x 32 x 7 mm, Losi 5ive-T/2.0, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part. Fits Losi 5ive-T, TLR 5ive-B and Mini WRC.Dimensionally identical with B59010 / B59011Content:2 pieces

€19.99*

LOSB2077 Losi Rear Hub Carrier Set 5T, TLR 5ive-B and Mini

Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini.Dimensionally identical with B59011Content:2 pieces

€19.99*

y0057 Ball & socket tool for Losi and HPI

Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

AT-AT001 ATOP Colored high flow fuel line with connections and accessories for Losi 5ive-T/2.0/B, Mini and HPI models

at_at001 Color: AT-001/02 - Red

Genuine Atop spare/option part. Colored fuel hose with clams and suction tubesArea Rc High flow fuel line kit.This high flow fuel line kit fits the HPI Baja series and the Losi 5ive-T/B and Mini. It may fit other large scale cars as well.The kit comes with 6 pieces of fuel line clips and 2 assembled plastic fittings. Those fittings cannot be compressed by the tanks fuel line grommet, so the inner diameter remains constant which improves fuel delivery to the carb.Fuel line dimensions:Length: 1mInside diameter: 3 mmOuter diameter: 6 mmAvailable colors: AT001/01 - YellowAT001/02 - RedAT001/03 - BlueAT001/05 - GreenIncludes:2 x Assembled plastic fittings6 x Fuel line clipsTygon fuel line

€17.90*

LOSB3218 Losi Front Center Driveshaft & CV Coupler 5T and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Content:1 set

€19.99*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

y0726 Gas-nitrided tuning clutch bell for Losi 5ive-T/2.0/B and Mini

Gas-nitrided tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding.Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Extreme clutch.Suitable for genuine slot drive Losi pinions. Comes with bolts and spring washers included.The bolt hole is countersunk from the inside so you can also use a flat head screw from the inside and a nut on the outside if you like. Content:1 pieces

€49.90*