ST-FTCO-BK GPM Air filter cover for Losi 5IVE-T
€13.30
Available
Product information "ST-FTCO-BK GPM Air filter cover for Losi 5IVE-T"
1145-1153 Canton Road
Room B, 4/F, Famous Horse Centre
00000 Mong Kok, Kowloon, Hong Kong
Hong Kong
Login
Accessories / Spare parts
This air filter oil is designed for lubricating foam filters for on-road and off-road use. It reinforces the filters' efficiency for better carburation and retains dirt, mud and sand particles. Prevents water from penetrating into the filter.It is recommended to put the filter with a little bit oil in a small polybag and work it vigorously by hand. Excessive oil must be pressed out (don't wring the foam!) afterwards.For cleaning the filter please use the special foam cleaner y0523.The filter element must be dry before re-oiling.Content:50 ml
Content: 50 Milliliter (€119.00 / 1000 Milliliter)
Genuine Motul spare/option part. High-cling oil for foam cartridge air filters, especially for offroad and street use. The oil reinforces the the air filter'e efficiency and retains dirt, mud and sand particles, which will greatly extend the life of the engine. The blue tint makes it easier to control even oil application to the filter.Apply oil to filter generously and work the foam vigorously by hand to ensure complete oil penetration. Press foam slightly to remove excessive oil when done.Contents:1 piece / 400 ml
Content: 400 Milliliter (€47.25 / 1000 Milliliter)
In case the servo cable is not long enough.Two selectable lengths:y0428/01 - 180 mmy0428/02 - 300 mm
Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.If using a FG monster / stadium model an additional hole for the support of the lateral carrier plate has to be cut out.
Customers also viewed
GPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.
GPM air filter cover which fits easily over your existing air filter. A fastening band band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments.
Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.Rear motor clamps: - Diameter 55,75 mm z.b. for Losi Spektrum 780 kV - Diameter 57 mm z.B. for Tenshock, Castle, or Spektrum 780kV- Diameter 57,8 mm z.B. for Leopard Baureihe 58- Diameter 60 mm z.B. for Lehner- Diameter 70 mm z.B. for BP70120 ZTW Beast Brushless Motor 620 kV Please note: This set does not include Motor or ESC. There are two different diameter versions of the Spektrum 780kV motor on the market. Please verify by doing your own measurements before placing an order! This conversion kit is not intended for the 5ive-T 2.0, even though the installation in this vehicle would be feasible with some modifications (drilling and thread tapping required). The version for the 5ive-T 2.0 you can find here: TT1024. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop tapes4 hook-and-loop tapes to secure the batteriesaluminum mounting pedestals for the battery plate16T pinion with 8 mm bore diameterMounting screws
Item N° 6465 FG air filter for 1:6 Off-Road models complete - setYou will need the adapter plate 6451/03 for installation.
Genuine FG spare/option part. Complete starter unitPull start unit for CY / Zenoah G230/240/260/270/290/320.Contents:1 piece
Product Safety DangerCauses skin irritation.Contains (R)-P-MENTHA-1,8-DIENE. May produce an allergic reaction.Contains Geranyl acetate. May produce an allergic reaction.Contains NERYL ACETATE. May produce an allergic reaction.Contains citral. May produce an allergic reaction.Contains linalool. May produce an allergic reaction.Extremely flammable aerosol.May cause drowsiness or dizziness.Pressurised container: May burst if heated.Toxic to aquatic life with long lasting effects.ApplicationCareProduct TypeMC CAREDescriptionSilicone based spray to polish the whole motorcycle. Fairings, plastics, dashboards, mudguards, crash bars, paintwork, varnish, carbon parts. Leaves a protective dry sheen to obtain a new finish on tarnished colours.TYPE OF USE Silicone based spray to polish the whole motorcycle. Fairing, plastics, dashboard, mudguards, crash bar, paintwork, varnish, carbon parts,... Particularly recommended to obtain an as new finish on tarnish colors.PERFORMANCES Polishes and revives the colors in plastic, carbon elements, paintwork and varnish on the whole motorcycle. Dries evenly and leaves a protective dry sheen. Protects paintwork and varnish from dust, insects, and mud... Repels water and dirt. RECOMMENDATIONS Before use, if the motorcycle is very dirty, wash with MOTUL MOTO WASH. Shake MOTUL SHINE & GO before use. Spray from a distance of 25 cm. Leave to dry for a few moments. Polish with a soft cloth to obtain a perfect finish. CAUTION: Do not project the product on handgrips and on the seat.
Content: 400 Milliliter (€32.25 / 1000 Milliliter)
The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase. The set is delivered as shown.Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm