SB014L GPM aluminum lower trailing arms for Losi Super Baja Rey / Rock Rey
Product information "SB014L GPM aluminum lower trailing arms for Losi Super Baja Rey / Rock Rey"
Genuine GPM spare/option part.
Lower trailing arms for Losi Super Baja Rey / Rock Rey made by GPM, machined from high grade 6061-T6 aluminum. They provide reliable and precise guidance of the rear axle. Much stronger than the stock plastic parts. More mounting holes for the shocks allow a more differentiated suspension setup. Included POM spacers in different widths allow for slightly tilted shocks if you wish.
Does not fit Super Baja Rey 2.0!
The ball joints are replaceable.
Attention: the screws which secure the ball joints have 1/16 Allen key size, not 1.5 mm! We recommend Allen key bit y0037/05.
Contents:
Lower trailing arms for Losi Super Baja Rey / Rock Rey made by GPM, machined from high grade 6061-T6 aluminum. They provide reliable and precise guidance of the rear axle. Much stronger than the stock plastic parts. More mounting holes for the shocks allow a more differentiated suspension setup. Included POM spacers in different widths allow for slightly tilted shocks if you wish.
Does not fit Super Baja Rey 2.0!
The ball joints are replaceable.
Attention: the screws which secure the ball joints have 1/16 Allen key size, not 1.5 mm! We recommend Allen key bit y0037/05.
Contents:
- 1 piece
Login
Kunden haben auch gesehen
Kunden haben auch gesehen
%
Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey and Super Rock Rey.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: The adapters only fit in combination with the standard plastic steering knuckles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which then prevents the drive pin from being fitted.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fenderwells will need some cutting.This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm
Genuine GPM spare/option part. Due to their turnbuckle design the GPM adjustable upper trailing arms for the Losi Super Baja Rey / Rock Rey allow for a fine adjustment without disassembly.Does not fit Super Baja Rey 2.0!Contents:2 pieces
Genuine Losi spare/option part. Please note:This servo mount does not fit the stock servo! It allows the mounting of much more powerful 1/5 servos like K-Power DM4000 / Savöx 236/241 / Spektrum S9010 / Losi S900S etc.Contents:1 piece
Genuine GPM spare/option part. Upper trailing arm mounts for Losi Super Baja Rey / Rock Rey, axle side made by GPM, machined from high grade 6061-T6 aluminum. Much stronger than the stock plastic part.Contents:1 piece
Genuine Futaba replacement / option part.Handy pistol-grip system with interference-insensitive FM modulation, ideal for controlling RC cars, especially for 1:5 models that have a gasoline engine with electric or magnetic ignition.The non-slip, rubber-coated knob allows steering movements like in the original car.The turning distance, the middle position and end points of the steering and throttle servo are adjustable. Conveniently positioned controls allow trim and travel to be adjusted on the transmitter even while driving.The pistol trigger allows fast acceleration and sensitive braking. The center position can be selected in a ratio of 7:3 or 5:5 to optimally adjust the trigger for combustion and electric cars. A 3-stage LED display system provides precise information about the current operating voltage of the transmitter at all times.Plug-in crystals that can be easily changed from the outside and a servo reverse function for reversing the servo direction are of course part of the basic equipment of such a system.All switches and controls which are not used during driving are protected under a smoked glass cover on the front of the transmitter.A built-in charging socket allows easy conversion to rechargeable NC battery operation.Functions: ATV steering Servo travel setting separately for throttle and steeringVariable Rate Control travel reduction for steering Neutral trim for steering and throttle Content: Transmitter Megatech Receiver R-122 JE 40 MHz Servo S3003 Battery box - BEC Switch cable with charging battery box BEC Servo accessories
The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. According to the installed fourwheel drive the models are easy to handle and to steer. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Sportsline models are equipped with a powerful brushless engine and a Brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.
You can choose the BMW E30 either as RTR version mounted with a 2.4 GHz radio control system or without radio control system. All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. Suitable 6mm gold contact plugs and sockets for the LiPo batteries are enclosed.