P-R-M 1000-41/03 Epoxy brake disk, for Mecatech star mount

€26.90*

Available

Product number: prm_1000_41_03

EAN: 4058575114437

Product information "P-R-M 1000-41/03 Epoxy brake disk, for Mecatech star mount"

PRM premium quality epoxy brake discs.

For the Mecatech double piston brake in conjunction with the new wheel driver with star mount for the brake discs.

Dimensions:

Outer diameter: 63,7 mm
Internal dimension: star mount Mecatech
Material thickness: 1,84 mm

Content:

2 Pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

P-R-M 1000-40/01 Epoxy brake disk for Mecatech

PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmSocket size: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces

€22.90*

P-R-M 1000-40/03 epoxy discs, slotted and with serrated edge, for Mecatech

PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces

€24.90*

Customers also bought

y19135 Ball Bearing Extractor

For ball bearings (diameter 8 x 22 mm) in steering blocks and uprights.Instructions:Remove the M5 bolt until the gap between the bolt's head and the top of the spindle is slightly more than the the width of the bearingInsert the spindle with the bolt into the bearing and srew the bolt in with an allen key from the opposite (do not tighten the bolt!)Now remove the bearing by just turning the spindle ccw

€34.90*

y0807 MD-Sil RTV silicone sealer

Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml

Content: 80 Milliliter (€211.25* / 1000 Milliliter)

€16.90*

y804 HT-flange sealer 518, 50 ml up to 200°C

Especially for installation of all engine gaskets. Temperature resistant from -55 °C to +200 °C. Resistant to water, mineral oils, synthetic lubricants, fuels, organic solvents and refrigerants. info: Hand tight: 10 - 20 minReady to use: 1 - 3 hoursGap fill: 0.5 mmContent: 50 ml Notes for usage: This surface seal is not for use as the sole sealant, it should always be applied in combination with a paper gasket.The HT-surface sealing agent should be sparsely applied over the entire surface, with care being taken that the sealant does not enter the devices internals (e.g. crankcase, differential a.s.o.) during the assembly.

Content: 50 Milliliter (€538.00* / 1000 Milliliter)

€26.90*

y1376 Full set of gaskets for Zenoah G240, G270, G290, and 4-Bolt CY engines

Full set of gaskets for Zenoah G40, G270, G290, and 4-Bolt CY engines.Set includes:0.4 mm cylinder gasket (Zenoah stock thickness!)1 mm exhaust gasket0.5 mm crankcase gasket0.5 mm isolator gasket0.5 mm carburetor gasket

€12.90*

ST-AN26V SPEED TEC 0,25/0.50 mm carburetor AN - expansion sealing gasket

st_an26v Thickness: ST-AN26V/025 - 0,25 mm

Genuine Speed-Tec spare/option part. For Zenoah G230/G240/G260/G270/G290/G320AN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5 The SPEED TEC AN - expansion sealing gaskets are available in the following versions:# ST-AN26V carburetor gasket 0,25/0,50 mm# ST-AN25I insulator gasket 0,25/0,50 mm# ST-AN24L air filter gasket 0,25/0,50 mm# ST-AN22 cylinder gasket, two bolt 0,25/0,50 mm# ST-AN42 cylinder gasket, four bolt 0,25/0,50 mm# ST-AN23G crank case gasket 0,25/0,50 mmContents:1 piece

€4.40*

y1105 Exhaust port and carburetor intake cover plates, for most usual 23cc - 30cc engines

Exhaust port and carburetor intake cover plates, made of 1 mm aluminum, fits most current 23cc - 30cc rc-car engines.Exhaust port cover:Total: approx. 20 x 45 mmMounting holes (ctr./ctr.): approx. 34 mm carb intake cover:Total: ellipse approx. 28 x 40 mmMounting holes (ctr./ctr.): approx. 31 mm

€4.90*

Similar products

9452/02 FG Filling and ventilation set

Genuine FG spare/option part. Spare part 9440.

€4.90*

1000-53 Mecatech brake fluid, 50 ml

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50 ml

€8.90*

y1000-53 Mecatech brake fluid, 50 ml

Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50 ml

€8.90*

y1515 AP adapter plates for 1001 Mecatech twin-piston in FG 2020

Genuine HT spare/option part. One each r/h and l/h adapter plate for installation of Mecatech twin-piston brake calipers on FG 2020 car uprights/spindles.Fits front and rear!Contents:1 x r/h adapter plate1 x l/h adapter plate4 x csh screw M3 x 10 mm

€19.90*

y0132 Linkage rod for MecaTech brakes, 2 pcs.

Item N° y0132Linkage rod for MecaTech brakes, 2 pcs.Linkage rods for actuating of MecaTech master brake cylinders.Dimensions:Length: approx. 165 mmDiameter: approx. 2 mm

€4.90*

Mecatech brake line 2.7x4 for Expert / Crosshydro, y1176, 1 m

Brake line 2.7 x 4 mm, especially for Mecatech Expert and Crosshydro brakes.

€4.90*

9451/01 FG Syringe - 1pce.

Spare part for .

€3.80*

P-R-M 1000-40/01 Epoxy brake disk for Mecatech

€22.90*

P-R-M 1000-40/03 epoxy discs, slotted and with serrated edge, for Mecatech

€24.90*

9439/39 FG Anschlussstück gerade für 4 mm Hydraulik Leitung - 1 Stück

Anschlussstück gerade passend für alle Hydraulikbremsleitungen mit einem Außendurchmesser von 4mm wie z.b. Colari, Magura II und Mecatech.

€11.70*

P-R-M 1000-40/02 Epoxy brake disk, slotted, for Mecatech

PRM premium quality epoxy brake discs. Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake FG Evo2020Content:2 Pieces

€22.90*

9449 FG Brake line cutter - 1pce.

Tool for .

€25.90*