1000-40 Mecatech brake rotors, 2 pcs.
€25.00
Available
Product information "1000-40 Mecatech brake rotors, 2 pcs."
Measures:
- Diameter 64 mm
- Thickness 1.9 mm
- 18 mm square
Login
Alternatives
PRM premium quality epoxy brake discs. For the Mecatech double piston brake in conjunction with the new wheel driver with star mount for the brake discs.Dimensions: Outer diameter: 63,7 mmInternal dimension: star mount MecatechMaterial thickness: 1,84 mm Content:2 Pieces
PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmSocket size: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces
PRM premium quality epoxy brake discs. Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake FG Evo2020Content:2 Pieces
PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces
Genuine Mecatech spare/option part for the FW01.Suitable for the special carrier: 2012-202, 2012-203, 2012-204.Content:2 pieces
Customers also bought
Steel ball joint 4 mm r/h, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One x r/h thread
These adjusting clips allow a faster adjustment of the wishbones. Suitable for front and rear suspension. The set contains 16 adjusting clips in 2 and 6mm size for 6 mm axles.
Shim rings to compensate the axial play of the shaft, to use as washers a.s.o.Part is delivered in silver or black color from vendor!
Genuine FG spare/option part. Dimensions:Diameter: 3 mmLength: 16 mmContents:4 pieces
Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake. Assembled with seals.Note from Mecatech:A special tool is required for replacing the two seals on the piston. Therefore the seals are not available as separate spare parts.Contents:1 piece
Genuine Mecatech spare/option part. Dimensions:Inner diameter: 2 mmOuter diameter: 4 mmContents:1 piece
Customers also viewed
PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmSocket size: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces
Genuine Mecatech spare/option part. Contents:3 pieces
Item N° 9538/09Brake rotors, 2 pcs.Replacement part for MecaTech twin piston hydraulic brake.Measures:Diameter 64 mmThickness 1.9 mm18 mm square
PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces
Replacement part for Mecatech twin piston hydraulic brake 1,5mm.Not fit into the new vision (2,5 mm)
Dimensions: Diameter: 69 mm Material thickness: 1,6 mm
The Samba 7 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 7 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 6 pipe. The Samba 7 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! New New connection from exhaust to manifold Lower center of gravity through new alignment Also suitable for 510 wheelbaseSamba 7 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 7 tuned pipe system is race legal for racing, with the DMC approval number 50-1101 engraved. The Samba 7 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as well<Will fit medium (510 mm) wheelbase cars from FG as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development"